• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.47-52
• /
• 1998

An analysis of dynamic responses is carried out on monoclinic anisotropic system due to a buried harmonic line source. The load is in the form of a normal stress acting along an arbitrary axis on the plane of symmetry within the orthotropic materials: In case that the line load is acting along the symmetry axis normal to the plane of symmetry, plane wave equation is coupled with verital shear wave and longitudinal wave. However, if the line load is acting along an arbitrary axis normal to the plane of symmetry, plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in a reference coordinate system, where the line load is coincident with a symmetry axis of the orthotropic material. Then the equation of motion is transformed into one with respect to general coordinate system with azimuthal angle by using transformation tensor. Plane wave solutions of monoclinic systems are derived for infinite media. Finally complete solutions for the plane harmonic wave are obtained by calculating the inverse of the integral transforms, in which bulk wave poles are avoided by deforming the contour of the integration to the complex plane. Numerical results for examples of orthotropic material belonging to monoclinic symmetry are demonstrated.

• 대한치과교정학회지
• /
• 제38권5호
• /
• pp.358-370
• /
• 2008

골격성 III급 부정교합자는 교정치료와 악교정 수술을 병행하여 치료하는 경우가 많아 골격형태에 대한 정확한 파악과 이해가 필수적이다. 이에 본 연구는 골격성 III급 부정교합자와 정상교합자 간의 골격 형태의 차이를 밝히고자 시행되었다. 실험군으로는 단국대학교 교정과에서 골격성 III급 부정교합으로 진단되어 술 전 교정치료를 받기로 예정된 총 20명을 선정하였고, 대조군으로는 골격성 I급 정상교합군으로 I급 교합관계를 보이며, 교정치료와 보철치료의 경험이 없는 정상 교합자 10명을 선정하여 CT촬영을 시행한 후 3차원 입체영상을 제작, 분석하여 상, 하악 기저골을 횡적으로 비교하여 다음과 같은 결론을 얻었다. 골격성 III급 부정교합자군의 특징을 살펴보면, 상악 기저골의 폭경이 유의성 있게 더 작았고, A point에서 ANS로 갈수록 제1소구치 부위에서 유의하게 폭이 감소하였으며, 제2소구치 부위에서 폭의 증가량이 유의하게 작았다. 하악 기저골은 B point, Antegonion 기준 횡단면에서 견치, 제1소구치 부위의 폭경이 유의성 있게 크게 나타났다. 상하악의 비교 시, 실험군의 견치부, 제1소구치부, 제2소구치부에서 하악에 비해 상악의 폭경이 유의성 있게 작음을 보였다.

• 대한치과교정학회지
• /
• 제34권3호
• /
• pp.229-240
• /
• 2004

본 연구는 정상교합군과 부정교합군의 교합평면경사도와 부정교합군의 치료 전후의 교합평면 경사도를 비교 분석함으로써 골격관계에 따른 교합평면의 치아 치조성 보상에 대하여 알아보고 교정치료 시 교합평면 설정의 기준을 마련하고자 61명의 정상교합자와 92명의 부정교합자의 치료 전후 측모 두부방사선사진을 분석하여 골격 관계에 따른 교합평면 경사도를 비교하였다. 정상교합군은 전후방적 골격양상에 따라 골격성 I급군, II급군 III급 군으로 나누었으며, 수직적 골격양상에 따라서는 수평군, 정상군, 수직군으로 분류하였다. 각 군의 계측치를 일원 분산분석과 사후검정을 통해 분석하였고 치료전후의 변화는 paired t-test로 유의성 검정을 하였다. 본 연구의 결과는 다음과 같다. 1. 정상교합군과 부정교합군간의 비교에 있어 일정한 값을 보인 계측치는 AB평면에 대한 교합평면 경사도이었다. 2. 치료 후의 AB평면에 대한 교합평면 경사도는 II급 골격관계에서는 증가하는 방향으로, III급 골격관계에서는 감소하는 방향으로 정상교합군의 값에 근접하였다. 3. 정상교합군에서 AB평면에 대한 하악 교합평면 경사도는 I급 골격 관계에서 $91.7^{\circ}$, II급 골격 관계에서 $88.8^{\circ}$, I격 관계에서는 $93.5^{\circ}$이었다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.53-58
• /
• 1998

In this paper, we study the response of several anisotropic systems to buried transient line loads. The problem is mathematically formulated based on the equations of motion in the constitutive relations. The load is in form of a normal stress acting with arbitrary axis on the plane of monoclinic symmetry. Plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in reference coordinate system, where the line load is coincident with symmetry axis of the orthotrioic material. Then the equation of motion is transformed with respect to general coordiante system with azimuthal angle by using transformation tensor. The load is first described as a body force in the equations of the motion for the infinite media and then it is mathematically characterized. Subsequently the results for semi-infinite spaces is also obtained by using superposition of the infinite medium solution together with a scattered solution from the free surface. Consequently explicit solutions for the displacements are obtained by using Cargniard-DeHoop contour. Numerical results which are drawn from concrete examples of orthotropic material belonging to monoclinic symmetry are demonstrated.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.239-244
• /
• 2003

The common errors in preoperative treatment plan for the orthognathic surgery can be occurred during cast impression, cast mounting procedure with face-bow transfer, surgical stent fabrication, and so on. One of the most common errors exists during mounting process of the model on the articulator. Accurate mounting of dental casts to articulator should be achieved by transferring the 3-dimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used for transfer this relationship to articulator, usually by relating the face-bow to a plane of reference of maxillary cast. The purpose of this study is evaluation of the accuracy of face-bow transferring of maxillary model to the articulator. The maxillary casts of thirty patients for orthognathic surgery were mounted on articulator with an face-bow instrument. The relationship of occlusal plane angle to Frankfort horizontal plane relations were compared the cephalogram with the cast-mounted articulator. As a result of this study, the significant difference between the maxillary occlusal planes angle in the cephalogram and articulator were found. The results were followed, 1. The mean occlusal plane angle in cast-mounted articulator was $13.5^{\circ}\;(SD{\pm}5.4)$. 2. The mean occlusal plane angle in cephalogram was $10.4^{\circ}\;(SD{\pm}4.3)$. 3. The mean difference of occlusal plane angle between cast-mounted articulator and cephalogram was $3.3^{\circ}\;(SD{\pm}4.6)$. According to the result, we should suggest that the occlusal plane angle to Frankfort plane in cast-mounted articulator is more steeper than that of cephalogram. And then, maxillofacial surgeon should try to get a more predictable result by suggesting the proper correction method and mounting the cast accurately.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.515-529
• /
• 2013

The moment-curvature relation for simple bending is a well-studied subject and the classical moment-curvature diagram is commonly found in literature. The influence of axial forces has generally been considered as compression onto symmetrically reinforced cross-sections, thus strain at the reference fiber never has been an issue. However, when dealing with integral structures, which are usually statically indeterminate in different degrees, these concepts are not sufficient. Their horizontal elements are often completely restrained, which, under imposed deformations, leads to moderate compressive or tensile axial forces. The authors propose to analyze conventional beam cross-sections with moment-curvature diagrams considering asymmetrically reinforced cross-sections under combined influence of bending and moderate axial force. In addition a new diagram is introduced that expands the common moment-curvature relation onto the strain variation at the reference fiber. A parametric study presented in this article reveals the significant influence of selected cross-section parameters.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.162-167
• /
• 2013

원형 구조를 갖는 평면 모노폴 UWB 안테나에서 접지면의 구조와 크기에 따른 입력 반사계수 특성의 변화를 연구하고, UWB 안테나가 장착되는 응용 기기에 따른 최적 접지면 구조와 크기를 제시하였다. 기준이 되는 원형 모노폴 안테나를 UWB 주파수 대역에서 동작하도록 반경 R 을 설계하였으며, 이 원형 모노폴을 수평면 접지 구조의 중심점에 올리고 시뮬레이션과 측정을 수행하여 양호한 결과를 얻었다. 연구 결과, 원형 모노폴의 반경이 작을 때 접지면의 적정 크기와 모노폴의 반경이 클 때 접지면의 최소 크기를 규정할 수 있었다.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.25-32
• /
• 2006

Mock-up model can be applied to measure accurate performance data but difficult to apply the variables in experiment. There can be a slight experiment errors in Scale model, but various parameters can be applied for a objective experiment. This paper aims to compare the daylighting performance in 1, 1/5, 1/10 scale model of offices and analyze the experiment errors to certificate the influence of model experiment. To analyse daylighting performance, a comparison of a Mock-up model, sized $12.0m(w){\times}7.2m(l){\times}3.7m(h)$, designed for experimentation of daylighting systems and its 1:5, 1:10 scale model. It has an identical configuration of reference room and the test room. For the test room, the lightshelf system was designed as Micro-4 reflective material. To assess work plane illuminance and light factor, photometric sensors of each room were installed at work-plane(6 points) and exterior horizontal illuminance (1 point). And luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio and luminance are discussed.

• 대한심미치과학회지
• /
• 제5권1호
• /
• pp.1-12
• /
• 1996

The arrangement of anterior artificial teeth is an important factor on the esthetics in the construction of complete dentures and prostheses. During construction of the complete denture the position of maxillary central incisor plays an important role in the arrangements of artificial teeth. The proper position of maxillary central incisor provides natural appearance of anterior teeth and the anterior reference point of occlusal plane. Many methods have been utilized to eatablish the position of the maxillary central incisor in complete denture prosthodontics. However, there has not been provided for the reference for Korean yet. This study was aimed to extablish a guide for the position of the maxillary central inciosr in Koreans. The horizontal and vertical distance between the maxillary central incisor and incisive papilla in Koreans were measured. 1. The mean value of horizontal distance from the maxillary central incisor to the incisive papilla had significant sexual difference, The average distance was 12.648mm in male and 11.385mm in female. 2. The horizontal distance of the incisive papilla had sexual difference, the average distance was 6.182mm in male and 5.622mm in female. 3. The vertical distance from the maxillary central incisor to the incisive papilla had not sexual difference, the average distance was 7.21mm. 4. The crown length of the maxillary central inciosrs from the distal interdental papilla had not sexual difference, the right central incisor was 6.40mm(mean) and the left central inciosr was 6.43mm(mean). 5. The clinical crown length of the maxillary central incisors had not sexual difference, the right central incisor 10.35mm(mean) and the left central incisor was 10.43mm(mean). 6. The shapes of the incisive papilla were pear(68.4%), oval(16%), triangular(6%), irregular(5%), rectangular(4%), and inverted pear(1%) shape.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.85-97
• /
• 1995

The arrangement of anterior artificial teeth is an important factor on the esthetics in the construction of complete denture and prosthesis. During construction of the complete denture the position of maxillary central incisor plays an important role in the arrangements of artificial teeth. The proper position of maxillary central incisor provides natural appearance of anterior teeth and the anterior reference point of occlusal plane. Many methods have been utilized to eatablish the position of the maxillary central incisor in complete denture prosthodontics. However, there has not been provided for the reference for Korean yet. This study was aimed to extablish the position of the maxillary central inciosr in Korean. The horizontal and vertical distance between the maxillary central incisor and incisive papilla in korean were measured. The results were as follows : 1. The mean value of horizontal distance from the maxillary central incisor to the incisive papilla had significant sexual difference, the average distance was 12.648mm (male), 11.385mm(female). 2. The horizontal distance of incisive papilla had sexual difference, the average distance was 6.182mm(male), 5.622mm(female). 3. The vertical distance from the maxillary central incisor to the incisive papilla had not sexual difference, the average distance was 7.21mm. 4. The crown length of maxillary central inciosrs from the distal interdental papilla had not sexual difference, the right central incisor was 6.40mm(mean) and the left central inciosr was 6.43mm(mean). 5. The clinical crown length of the maxillary central incisors had not sexual difference, the right central incisor 10.35mm(mean) and the left central incisor was 10.43mm(mean). 6. The anatomic shapes of incisive papilla were pear(68.4%), oval(16%), triangular(6%), irregular(5%), rectangular(4%), and inverted pear(1%) shape.