• 대한전자공학회논문지TC
• /
• 제42권9호
• /
• pp.97-100
• /
• 2005

본 논문에서는 433MHz에서 동작하는 RFID 리더용 직교형 안테나에 관하여 기술하였다 본 이중편파 안테나는 1x2 서브어레이를 기본으로 하여 급전회로망의 위상을 동위상 또는 반대 위상을 갖도록하여 2개 안테나의 방사체에서의 상대적인 전류 분포를 제어하여 빔 패턴에서 편파를 수직 및 수평으로 복사가 가능토록 하였다 단일 안테나는 역-에프형 구조를 이용하였으며 위상차에 따른 단락점에서부터 개방점 까지의 전류의 변화가 궁극적으로 수직 및 수평 편파가 제어되도록 하였다 이중입력에 대한 안테나의 이득은 수직 및 수평 편파에 대하여 2.7 및 0.4 dBi를 나타내었으며, 포트간 아이솔레이션은 25dB 이하의 특성을 나타내었다.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.809-820
• /
• 2005

The fluvial sequence developed along the channel margin of meander bends in the midstream of the Yeongsan River consists of channel deposits at the bottom and overbank deposits at the top, and shows a fining-upward trend. The fluvial deposits consist of 7 sedimentary facies, and facies association forms 7 architectural elements. The channel deposits formed as channel bar or point bar. The channel bar deposits consisted of architectural element of gravel bedform were formed by channel lag deposits within the channel; whereas, the channel bar deposits consisted of architectural elements of downcurrent-dipping inclined strata sets, cross-stratified and horizontally stratified sets, and horizontally stratified sets were formed by downstream migration of sand wave or downstream transport of sand by traction current in the upper flow regime conditions within the channel. The point bar deposits consist of architectural elements of down current-dipping inclined strata sets, horizontally stratified sets, cross-stratified and horizontally stratified sets, and laterally inclined and horizontally stratified sets. These architectural elements are thought to have been formed by the combined effects of the migration of sand dunes and the formation of horizontal lamination in the upper flow regime plane bed conditions. The overbank deposits consist of the architectural elements of overbank fine and sand sheet and lens. The overbank fines were formed by settling of mud from slackwater during flooding over floodplain whereas the sand sheet and lens were formed by traction of sands introduced episodically fiom channel to the overbank during flooding.

• 대한치과교정학회지
• /
• 제20권3호
• /
• pp.427-446
• /
• 1990

The objective of this study was to understand the major changes of craniofacial dimensions and spatial growth pattern during the late embryonic and fetal period of human fetures. This study was performed with the selective materials of normal fetuses received from the Registry of Congenital Malformation of Seoul National University Hospital. The specimens consisted of nineteen embryos and sixty-six fetuses. The photomicrographs from mid-segittal sections of embryos were used for angular measurement, and the lateral cephalograms taken with soft X-ray were also measured in liners and angular aspects. All of the anatomical landmarks for the tracing of the photomicrographs and cephalograms were referred to the previous reports on literature. The sequential changes of prenatal craniofacial dimensions and agles were analysed statistically and discussed on the focus about the developmental growth directions of human ore-facial structure arised from heterogeneous origins. The results are as follows, 1) Cranial base angle was almost formed at about 6 weeks old embryos with the average angle of $127.4{\pm}6.33^{\circ}$ (n=3) and it was almost constant onwards. 2) The linear increase rates of anterior cranial base length and anterior facial height exceeded those of the posterior cranial base length and posterior facial height, and the maxilla grows more rapidly on the horizontal dimension than the vertical dmension during the fetal period. 3) The angular relationship between the anterior cranial base and palatal plane decreasedslightly during the fetal period, disclosing $11^{\circ}$ at 12th week gestation and $5^{\circ}$ at 41th weeks gestation. 4) Genial angle was maintained almost constantly at about $130^{\circ}$ during the fetal period from 12 weeks to 41 weeks of gestation.

• KIEAE Journal
• /
• 제6권2호
• /
• pp.67-74
• /
• 2006

As sustainable design technologies, advanced daylighting systems with lightshelves have been developed and are currently under monitoring the daylighting performance. This study aims to evaluate the comparative daylighting performance of sloped lightshelf and conventional glazing window with mock-up model, reconstructed as a prototype of Korean office building, sized $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and $1.8m{\times}4.8m$($w{\times}h$) for the south facing side-window was installed on the rooftop of engineering building, Kyung Hee University in Korea. It has an identical configuration of reference room and the test room. For the test room, the sloped type lightshelf system was designed as 10mm transparency sheet glass, tilt angle degree $29^{\circ}$, and total sized 1.28m (interior length 0.88m, exterior length 0.49m). It consisted of daylighting collector, entrance glazing and reflector. To assess daylighting performance, the totally 37 measuring points for illuminance and 2 view points of luminance were monitored in every 30 minutes from 12:00 to 15:00. For the detailed analysis, photometric sensors of each room were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point). Luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio, uniformity, and luminance are discussed.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.111-122
• /
• 2020

Researchers up to date have introduced several Structural Health Monitoring (SHM) techniques with varying advantages and drawbacks for each. Satellite positioning systems (GPS, GLONASS and GALILEO) based techniques proved to be promising, especially for high natural period structures. Particularly, the GPS has proved sufficient performance and reasonable accuracy in tracking real time dynamic displacements of flexible structures independent of atmospheric conditions, temperature variations and visibility of the monitored object. Tall structures are particularly sensitive to oscillations produced by different sources of dynamic actions; such as typhoons. Wind forces induce in the structure both longitudinal and perpendicular displacements with respect to the wind direction, resulting in torsional effects, which are usually more complex to be detected. To efficiently track the horizontal rotations of the in-plane sections of such flexible structures, two main issues have to be considered: a suitable sensor topology (i.e., location, installation, and combination of sensors), and the methodology used to process the data recorded by sensors. This paper reports the contributions of the measurements recorded from dual frequency GPS receivers and uni-axial accelerometers in a full-scale experimental campaign. The Canton tower in Guangzhou-China is the case study of this research, which is instrumented with a long-term structural health monitoring system deploying both accelerometers and GPS receivers. The elaboration of combining the obtained rather long records provided by these two types of sensors in detecting the torsional behavior of the tower under ambient vibration condition and during strong wind events is discussed in this paper. Results confirmed the reliability of GPS receivers in obtaining the dynamic characteristics of the system, and its ability to capture the torsional response of the tower when used alone or when they are combined with accelerometers integrated data.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.353-358
• /
• 2010

This research introduces a new and improved design for a pneumatic cylinder driven roll feeder wherein each of the principal rotating feeder parts is configured so as to have feeding accuracy and to be low manufacturing cost. The feed pitch accuracy of the proposed roll feeder was evaluated by measuring lengths of cut offs of the strip stock with a shear attached to an air press. The air press was designed, manufactured, and mounted on the same table of the proposed roll feeder such that the strip stock maintained horizontal plane until the strip stock entered into the shear. The proposed roll feeder and the air press were designed to be operated automatically by a PLC employed controller. The feed pitch accuracy of the proposed roll feeder was analyzed by setting the pitch as 10, 12.5, and 15mm. At each predetermined feed pitch, the proposed roll feeder was tested 300 times as one test set and replicated three times. The average lengths of the cut offs of the strip stock ranged from 9.98 to 10.13mm, from 12.42 to 12.57mm, and from 14.96 to 15.06mm at the predetermined 10, 12.5, and 15mm feed pitch, respectively, among the total of 900 samples of each feed pitch. Main cause of variation of the length of the cut off of the strip stock fed by the proposed roll feeder was considered to be fluctuation of the air press during recompressing period of the air compressor to pressurize the air in the air tank. The largest difference between the maximum and the minimum length of the cut off was appeared while the air compressor recompressing the air. The air compressor used for this study restricted the air delivered to the proposed roll feeder while it was still running. Thus, this air delivery restriction problem should be improved by stabilizing the air press while the proposed roll feeder is running.

• 전자공학회논문지CI
• /
• 제38권6호
• /
• pp.70-81
• /
• 2001

본 논문에서는 한 개의 카메라와 한 대의 환등기(LCD 환등기 혹은 슬라이드 환등기)를 이용하여 2차원 얼굴 영상으로부터 3차원 얼굴 형상을 모델링하는 방법을 제안한다. 환등기를 이용하여 사람 얼굴에 라이트 빔을 투영하고 이를 조금씩 이동시키며 영상을 획득한 뒤 각 2차원 영상의 지역적 정보와 영상들 사이의 시간적 정보를 함께 이용하여 3차원 형상을 복원하는 방법을 채택하였다. 제안된 방법에서는 특정이 서로 다른 영역들의 효과적인 3차원 좌표 모델링을 위해 영상을 그림자 부분 얼굴 부분 그리고 머리카락 부분으로 나누어 처리하는 지역 분할(region segmentation) 기법을 도입하였고, 2차원 얼굴 영상 획득 시간을 줄이고 고속 3차원 스캔을 위하여 한 영상 안에 다수의 라이트 빔(multiple light beams)을 이용하였다. 또 한 라이트 빔의 경계를 정확하게 검출하기 위하여 라이트 빔 캘리브레이션(light beam calibration) 기법을 제안하여 사용하였다. 실험 결과 제안한 방법을 통해서 머리카락 부분을 포함한 전체 얼굴 영역에서 향상된 3차원 모델링 결과를 얻을 수 있었다.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.687-707
• /
• 2015

A finite element computer code for short-term analysis of steel-concrete composite structures is extended to study long-term effects under service loads, in the present work. Long-term effects are important in engineering design because they influence stress and strain distribution of the structural system and therefore contribute to the increment of deflections in these structures. For creep analysis, a rheological model based on a Kelvin chain, with elements placed in series, was employed. The parameters of the Kelvin chain were obtained using Dirichlet series. Creep and shrinkage models, proposed by the CEB FIP 90, were used. The shear-lag phenomenon that takes place at the concrete slab is usually neglected or not properly taken into account in the formulation of beam-column finite elements. Therefore, in this work, a three-dimensional numerical model based on the assemblage of shell finite elements for representing the steel beam and the concrete slab is used. Stud shear connectors are represented for special beam-column elements to simulate the partial interaction at the slab-beam interface. The two-dimensional representation of the concrete slab permits to capture the non-uniform shear stress distribution in the horizontal plane of the slab due to shear-lag phenomenon. The model is validated with experimental results of two full-scale continuous composite beams previously studied by other authors. Results are given in terms of displacements, bending moments and cracking patterns in order to shown the influence of long-term effects in the structural response and also the potentiality of the present numerical code.

• Nuclear Engineering and Technology
• /
• 제5권4호
• /
• pp.291-309
• /
• 1973

TRIGA Mark II와 III 원자로의 여러가지 가동조건에 있어서 노벽으로 부터의 누설 ${\gamma}$선에 의한 조사선양률을 3"$\times$3"원통형 NaI(T1) 섬광계수기와 400 channel파 고분석장치로 측정하였는데 측정된 spectrum으로부터 조사선양률을 산출하는데는 실제적면에서 복잡하기 짝이 없는 response matrix 방법대신 정도가 좋으면서도 비교적 그 과정이 단순한 Moriuchi의 specturm -조사선양률 환산 이론을 적용하였다. 연구결과에 따르면 노심에서 발생된 누설 ${\gamma}$선의 기본적인 spectrum 형태는 원자로의 열출력이나 차장벽에 의한 강도의 감쇠에 별로 영향을 받지 않고 있으며 원자로 누설${\gamma}$선에 의란 전조사선양률의 공기중에서의 감쇠는 폭 넓은 energy분포에도 불구하고 지수함수적 감쇠를 하고 있음이 판명되있다. 이 전조사선양률은 원자로의 열출력에 대체로 비례하고 있으나 TRIGA Mark III과 같은 가동형노심의 경우는 측정된 spectrum이 매우 다양한바, 그로부터 산출된 전조사선양률의 크기에는 관계없이, spectrum 분해방법을 적용하여 노심에서 발생된 누설 ${\gamma}$선과 원자로가동중 발생되는 여지 ${\gamma}$선의 기여를 판별 해석하는데 성공하였다.

• Physical Therapy Rehabilitation Science
• /
• 제6권1호
• /
• pp.33-38
• /
• 2017

Objective: This study tried to examine the muscle activity of the neck and trunk according to head posture changes during use of laptops. Design: Cross-sectional study. Methods: This study included nineteen young men and women. All subjects maintained each posture while practice typing on laptops for ten minutes with a 5-minute break between each posture. For the neutral head posture, the subjects practiced typing while pulling their chins down towards the Adam's apple and were able to look at their knees while having their external auditory meatus, acromion, and greater trochanter vertical to the ground. For the natural head posture, they practiced typing while balancing their posture between extension and flexion of the cervical vertebrae by themselves without any guidelines. While a forward head posture was created by having their heads face the front horizontal to the rope hanging from the ceiling, they practiced typing with their external auditory meatus located in the place which was 5 cm in front of the vertical plane. The subjects used general word process but practiced typing with accuracy and high speed. Muscle activities were randomly measured using surface electromyography according to each postures. Results: The research result had found that muscle activity with the natural head posture was more significantly reduced than that of the forward head posture in the sternocleidomastoid muscle, upper trapezius, cervical vertebral spinae, and thoracic vertebrae spinae muscles (p<0.05) and that the neutral head posture was more significantly reduced than that of forward head posture in the upper trapezius, cervical vertebral spinae, and thoracic vertebrae spinae muscle activity (p<0.05) with significant increases in lumbar spinae muscle activity (p<0.05). Also, muscle activity with the neutral head posture significantly increased more in the sternocleidomastoid muscle and lumbar spinae than that of the natural posture (p<0.05). Conclusions: Our study results suggest that in order to prevent musculoskeletal pain, the neutral head posture with use of laptops is effective in reducing load to the shoulders and vitalizing the postural muscles.