• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.297-302
• /
• 2009

In this paper, we propose advanced screen detector as a tool for selecting the object for tracking and estimating its distance from a screen using fuzzy logic in vision based pointing device. Our system classifies the line component of the input image into horizontal and vertical lines and applies the fuzzy rule to obtain the best line pair which constitute peripheral framework of the screen. The proposed system improves the detection ratio for detecting the screen in relative to the detector used in the previous works for hand-held type vision based pointing device. Also it allows to detect the screen even though a small part of it may be hidden behind other object.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.41-49
• /
• 2012

This paper proposes a detection method of wipes including horizontal wipes with linear moving borders, such as horizontal or vertical wipes, Barn Doors, and Iris Rounds with circular moving borders. The suggested method first obtains a difference image between two adjacent frames, and extracts lines and circles by applying Hough transformation to the extracted difference image. Then, we detect wipe transitions by employing an evaluation function that analyzes the number of moving trajectories of lines or circles, their moving direction and magnitude. To evaluate the performance of the suggested algorithm, experimental results show that the proposed method can effectively detect wipe transitions with linear and circular moving borders rather than some existing methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1278-1284
• /
• 2010

In this paper, we propose a new mura detection algorithm for TFT-LCD effectively, which is based on multi-point, 2-dimensional FFT. Since mura in TFT-LCD has a certain area shape, it is seen as a sin wave in a LCD line. Since shapes of mura can be seen a circle, horizontal oval, or vertical oval, it is shown that they can be detected by 2-dimensional FFT easily. Through simulation for test image, it is shown that proposed algorithm can detect various sizes of mura. The proposed algorithm can be utilized in automatic test equipment for effective TFT-LCD mura detection.

• Journal of Digital Contents Society
• /
• v.15 no.2
• /
• pp.209-217
• /
• 2014

It is very important to classify a lot of table-form documents into the same type of classes or to extract information filled in the template automatically. For these, it is necessary to accurately analyze table-form structure. This paper proposes an algorithm to extract corner points based on line edge segments and to classify the type of junction from table-form images. The algorithm preprocesses image through binarization, skew correction, deletion of isolated small area of black color because that they are probably generated by noises.. And then, it processes detections of edge block, line edges from a edge block, corner points. The extracted corner points are classified as 9 types of junction based on the combination of horizontal/vertical line edge segments in a block. The proposed method is applied to the several unconstraint document images such as tax form, transaction receipt, ordinary document containing tables, etc. The experimental results show that the performance of point detection is over 99%. Considering that almost corner points make a correspondence pair in the table, the information of type of corner and width of line may be useful to analyse the structure of table-form document.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.133-145
• /
• 1996

This paper presents an indirect cutting force measuring system, which uses the current signals from the AC servo drive units of the horizontal machining center, with its applications to the adaptive regulation of the cutting forces in various milling processes and to the on-line monitoring of tool breakage. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that the indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The whole scheme has been embedded in the commercial machining center and a series of cutting experiments on the face cutting processes are performed. The adaptive controller reveals reliable cutting force regulating capability against the various cutting conditions. It is also shown that the tool breakage in milling can be detected within one spindle revolution by adaptively filtering the current signals. The effect of the cutter run-out has been considered for the reliable on-line detection of tool breakage.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.29-38
• /
• 2024

The Matched Field Processing (MFP) is an estimation method for a source range and depth based on the prediction of sound propagation. However, as the frequency increases, the prediction inaccuracy of sound propagation increases, making it difficult to estimate the source position. Recently proposed, the Frequency-Difference Matched Field Processing (FD-MFP) is known to be robust even if there is a mismatch by applying a frequency-difference autoproduct extracted from the auto-correlation of a high frequency signal. In this paper, in order to evaluate the performance of the FD-MFP using a horizontal line array, simulations were conducted in the environment of the East Sea of Korea. In the area of Bottom Bounce (BB) and Convergence Zone (CZ) where detection of a sound source is possible at a long range, and the results of localization were analyzed. According to the the FD-MFP simulations of horizontal line array, the accuracy of localization is similar or degraded compared to the conventional MFP due to diffracted field and mismatch of sound speed. There was no clear result from the simulations conforming that the FD-MFP was more robust to mismatch than the conventional MFP.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.100-105
• /
• 1997

To analyze the multipath propagation effects on the source bearing detection of HLA(Horizontal Line Array), the conversion mechanism of the multipath into the bearing is described, and the bearing is estimated from the multipath modeled with typical sound velocity structures of the East and the South Sea of Korea. The erroneous bearing is observed from the beamforming outputs simulated with the modeled multipath, and the erroneous phenomena are analyzed. In case of the East Sea, since the multipath propagation with a high receiving angle occurs due to strong inverse slope of the sound velocity structure, it is possible that the estimated source bearing is different from the real source bearing, and that the number of the source is misrecognized.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.395-401
• /
• 1993

The purpose of this paper is to develop an automatic measuring system based on the digital image processing which can be applied to the in-process measurement of the characteristics of the thin thickness. The derivative operators is used for edge detection in gray level image. This concept can be easiliy illustrated with the aid of object shows an image of a simple light object on a dark background, the gray level profile along a horizontal scan line of the image, and the first and second derivatives of the profile. The first derivative of an edge modeled in this manner is () in all regions of constant gray level, and assumes a constant value during a gray level transition. The experimental results indicate that the developed qutomatic inspection system can be applied in real situation.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.72-79
• /
• 1995

The purpose of this paper is to develop an automatic measuring system based on the digital image processing which can be applied to the in-process measurment of the characteristics of the thin thickness. The derivative operators is used for edge detection in gray level image. This concept can be easily illustrated with the aid of object shows an image of a simple light object on a dark background, the gray level profile along a horizontal scan line of the image, and the first and second derivatives of the profile. The first derivative of an edge modeled in this manner is 0 in all regions of constant gray level, and assumes a constant value during a gray level transition. The experimental results indicate that the developed automatic inspection system can be applied in real situation.

• Journal of Internet Computing and Services
• /
• v.25 no.5
• /
• pp.131-140
• /
• 2024

Aids to navigation, such as buoys used in maritime environments, play a crucial role in providing accurate information to navigating vessels, enabling them to precisely determine their position and maintain safe routes by marking surrounding hazardous areas. However, collisions between ships and these aids result in substantial costs for buoy damage and repair. While high-end equipment is currently used to prevent such accidents, its widespread adoption is hindered by cost concerns. This paper presents research on a maritime object detection algorithm utilizing embedded systems to address this issue. Previous studies employed the Hough transform for horizon detection, but its high computational demands posed challenges for real-time processing. To overcome this limitation, our approach first performs image segmentation, followed by an optimized Otsu algorithm for horizon detection. Subsequently, we establish a Region of Interest (ROI) based on the detected horizon, focusing on areas with a high risk of ship collision. Within this ROI, particularly below the horizon line, maritime objects are detected. A Convolutional Neural Network (CNN) model is then applied to determine whether the detected objects are ships. Objects classified as ships within the ROI are considered potential collision risks.