• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1394-1399
• /
• 2001

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S(Wind Turbine System) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S. the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program (STAR MODAL) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer. For validation of these experiments. the finite element analysis is performed with commercial F.E.M Program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3866-3873
• /
• 2023

In 4th^-generation storage rings, whether to operate the beam as round or flat is a critical question. A round beam has equal horizontal and vertical emittances, and is an efficient solution to reduce strong intra-beam scattering effects and lengthen the Touschek lifetimes, but a flat beam produces a brighter photon beam than a round beam. To provide both beams concurrently rather than bifurcating the beam time, this paper presents the exploitation of beam dynamics and the cutting-edge fast pulser that supports concurrent operation of round beam and flat beam.

• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.71-79
• /
• 1980

The purpose of this study was (1) to determine the prevalence of some causes by which dental occlusion might be affected , (2) to determine the prevalence of malocclusion, and types of molar, vertical incisor and horizontal incisor relationships, and (3) to examine the sex difference in the prevalence ratios, and (4) to determine the between-examiner differences in assessing types of dental occlusion. The material consisted of 1281 males and 811 females, total 2091 persons, aged 17 to 21 years. Two examiners who were graduate students in the orthodontic course, examined independently dental occlusion of the material. Before calculating the statistics, the subjects consisted of 156 mates and 164 females, total 320 persons, haying any one or more causes suspected to affect dental occlusion, was eliminated. Then the remained subjects, 1124 males and 647 females, total 1771 persons, were assessed. The results were as follows 1. The prevalence of some causes by which dental occlusion might be affected was 15.32 per cent. The missing rate of any one or more first molars was 8.85 percent, that of any one or more teeth positioned anterior to the first molar was 3.83 per cent. The prevalence of crossbite of the first molar was 0.48 per cent, that of retained primary teeth was 0.77 percent, and that of orthodontic treatment was 0.43 per cent. 8. The rate of between-examiner difference was 12.53 per cent in assessing the types of molar relationship, 18.86 percent in assessing the types of horizontal incisor relationship, and 26.37 percent in assessing the types of horizontal incisor relationship. 3. There was no sex difference in the prevalence ratios of the types of molar relationship. The prevalence of Class I molar relationship was 80.91 percent, that of Class II was 5,03, that of Class II subdivision was 4.01, Percent, that of Class III was 5.99 percent and that of Class III subdivision was 4.07 percent. 4. In the prevalence of the types of horizontal incisor relationship, there were no sex differences except that of Class II division 2. The prevalence of Class I horizontal incisor relationship was 73.12 percent, that of Class II division t was 12.03 percent, that of Class II division 2 was 6.58 percent in male and 4.33 percent in female, and that of Class III was 9.09 percent. 5. In the prevalence of the types of vertical incisor relationship, there were no sex differences except that of deep bite, The prevalence of open bite was 2.20 per cent, that of edge-to-edge bite was 9.15 percent, that of normal bite was 76,34 percent, and that of deep bite was 14.15 percent in male and 9.12 percent in female. 6. There was no sex difference in the prevalence of malocclusion the prevalence of malocclusion was 82.67 percent and that of normal occlusion was 17.33 percent. 7. There was a tendency that when Class I molar relationship changed to Class II, incisor relationships were to be larger overjet or upright upper incisors and deep bite, but when that changed to Class III molar relationship, these were to be cross bite and openbite.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.29-35
• /
• 2009

In this paper by using the image taken from the rear of the vehicle to effectively extract the license plate and how to recognize the characters appearing in the offer. How to existing research on the entire video by following the pre-edge (edge) images to obtain yijinhwa. Qualified heopeu in a binary image (Hough) to convert the horizontal and vertical lines to obtain, using the characteristics of the plates to extract the license plate area. The problem with this method, the processing time is so difficult to handle real-time status of irregular points, and visual contrast with yagangwan border does not appear in the plates to extract the license plate area is that it is not. In addition, the rear of the vehicle license plate area from images taken using the characteristics of the plates myeongamgap changes sutjapok in the area, background area and the number number area of the region confirmed the contrast of the car and identified the number and the number of 42 of distance to extract the license plate area. How to research, the existing damage to the border of the plate to fail to extract the license plate area, a matter of hours to resolve problems in real-time, practical application is processed. Chapter 100 as the results of the experiment the sample video image in a car that far experiment results automatically read license plates have been able to extract the license plate and failing to represent 13% of images, character recognition result of failing to represent the image was 0.4%

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.176-184
• /
• 2017

To interpret the seismic image precisely, random noises should be suppressed and the continuity of the image should be enhanced by using the appropriate smoothing techniques. Structure-Oriented Filter-Edge Preserving (SOF-EP) technique is one of the methods, that have been actively researched and used until now, to efficiently smooth seismic data while preserving the continuity of signal. This technique is based on the principle that diffusion occurs from large amplitude to small one. In a continuous structure such as a horizontal layer, diffusion or smoothing is operated along the layer, thereby increasing the continuity of layers and eliminating random noise. In addition, diffusion or smoothing across boundaries at discontinuous structures such as faults can be avoided by employing the continuity decision factor. Accordingly, the precision of the smoothing technique can be improved. However, in the case of the structure-oriented semblance technique, which has been used to calculate the continuity factor, it takes lots of time depending on the size of the filter and data. In this study, we first implemented the SOF-EP method and confirmed its effectiveness by applying it step by step to the field data. Next, we proposed and applied the corner response method which can efficiently calculate the continuity decision factor instead of structure-oriented semblance. As a result, we could confirm that the computation time can be reduced by about 6,000 times or more by applying the corner response method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.696-701
• /
• 2017

This paper proposes an improved de-interlacing method that converts interlaced images into progressive images from one field. First, it calculates inter-pixel values applying third-order spline interpolation for the horizontal direction from four upper lower pixel values of missing pixels. From inter-pixel values obtained from spline interpolation and upper lower pixels with value, the proposed method makes an accurate estimate of the direction by applying the correlation between upper and lower pixels. The correlation between upper and lower pixels is calculated in nine directions of a missing pixel by using values obtained from spline interpolation and pixels with value. The direction of an edge is determined as the direction in which the correlation between upper and lower pixels is at its minimum. Thus, a missing pixel is calculated by taking the average of upper lower pixels obtained from the predicted direction of an edge. From the simulation results, there are problems in that it takes a bit more time for processing, but it is expected that the time problem will be improved by increasing CPU processing speed. As for image quality, it is shown that the proposed method improves both subjective and objective image quality and quantitatively improves picture signal-to-noise ratio (PSNR) in the range between 0.1 dB to 0.5 dB, as compared with previously presented de-interlacing methods.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.69-76
• /
• 2011

According to the related reports, about 60 percents of ship collisions have resulted from operating mistake caused by human factor. Specially, the report said that negligence of observation caused 66.8 percents of the accidents due to a human factor. Hence automatic detection and tracking of an object from an IR images are crucial for safety navigation because it can relieve officer's burden and remedies imperfections of human visual system. In this paper, we present a method to detect an object such as ship, rock and buoy from a sea IR image. Most edge directions of the sea image are horizontal and most vertical edges come out from the object areas. The presented method uses them as a characteristic for the object detection. Vertical edges are extracted from the input image and isolated edges are eliminated. Then morphological closing operation is performed on the vertical edges. This caused vertical edges that actually compose an object be connected and become an object candidate region. Next, reference object regions are extracted using horizontal edges, which appear on the boundaries between surface of the sea and the objects. Finally, object regions are acquired by sequentially integrating reference region and object candidate regions.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1051-1061
• /
• 2007

The impact of midlatitude synoptic system (upper-level trough) on typhoon intensity change was investigated by analyzing the spatial and temporal characteristics of vertical wind shear (VWS), relative eddy momentum flux convergence (REFC), and potential vorticity (PV). These variables were computed over the radial mean $300{\sim}1,000km$ from the typhoon center by using GDAPS (Global Data Assimilation and Prediction System) data provided by the Korea Meteorological Administration (KMA). The selected cases in this study are typhoons Rusa (0215) and Maemi (0314), causing much damage in life and property in Korea. Results show that the threshold value of VWS indicating typhoon intensity change (typhoon to severe tropical storm) is approximately 15 m/s and of REFC ranges 6 to 6.5 $ms^{-1}day^{-1}$ in both cases, respectively. During the period with the intensity of typhoon class, PVs with 3 to 3.5 PVU are present in 360K surface-PV field in the cases. In addition, there is a time-lag of 24 hours between central pressure of typhoon and minimum value of VWS, meaning that the midlatitude upper-level trough interacts with the edge of typhoon with a horizontal distance less than 2,000 km between trough and typhoon. That is, strong midlatitude upper-level divergence above the edge of the typhoon provides a good condition for strengthening the vertical circulation associated with the typhoons. In particular, when the distance between typhoon and midlatitude upper-level trough is less than 1,000 km, the typhoons tend to weaken to STS (Severe Tropical Storm). It might be mentioned that midlatitude synoptic system affects the intensity change of typhoons Rusa (0215) and Maemi (0314) while they moves northward. Thus, these variables are useful for diagnosing the intensity change of typhoon approaching to the Korean peninsula.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.355-361
• /
• 2008

Stereo matching is one of the most active research areas in computer vision. In this paper, we propose a stereo matching scheme using genetic algorithm for object depth recognition. The proposed approach considers the matching environment as an optimization problem and finds the optimal solution by using an evolutionary strategy. Accordingly, genetic operators are adapted for the circumstances of stereo matching. An individual is a disparity set. Horizontal pixel line of image is considered as a chromosome. A cost function is composed of certain constraints which are commonly used in stereo matching. Since the cost function consists of intensity, similarity and disparity smoothness, the matching process is considered at the same time in each generation. The LoG(Laplacian of Gaussian) edge is extracted and used in the determination of the chromosome. We validate our approach with experimental results on stereo images.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2294-2301
• /
• 1998

The aim of this paper is to extract features from each news scenes for example, symbol icon which can be distinct each broadcasting corp, icon and caption which are has feature and important information for the scene in respectively, In this paper, we propose extraction methods of caption that has important prohlem of news videos and it can be classified in three steps, First of al!, we converted that input images from video frame to YIQ color vector in first stage. And then, we divide input image into regions in clear hy using equalized color histogram of input image, In last, we extracts caption using edge histogram based on vertical and horizontal line, We also propose the method which can extract news icon in selected key frames by the difference of inter-histogram and can divide each scene by the extracted icon. In this paper, we used comparison method of edge histogram instead of complex methcxls based on color histogram or wavelet or moving objects, so we shorten computation through using simpler algorithm. and we shown good result of feature's extraction.