• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.139-148
• /
• 2016

The passive control methods such as horizontal and vertical fences on the lower surface of the bluff body were applied to suppress the vortex shedding and enhance the aerodynamic stability of flow. For investigating the effects of the passive control methods, wind tunnel experiments on the unsteady flow field around a bluff body near a moving ground were performed. The boundary layer and velocity profiles were measured by the Hot Wire Anemometer (HWA) system and the vortex shedding patterns and flow structures in a wake region were visualized via the Particle Image Velocimetry (PIV) system. Also, it is a measuring on moving ground condition that the experimental values of the critical gap distances, Strouhal numbers and aerodynamic force FFT analyses. Through the experiments, we found that the momentum supply due to moving ground caused the vortex shedding at the lower critical gap distance rather than that of fixed ground. The horizontal and vertical fences increase the critical gap distance and it can suppress the vortex shedding. Consequently, the stability characteristics of the bluff body near a moving ground could be effectively enhanced by the simple passive control such as the vertical fences.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.61.2-61.2
• /
• 2014

We present a set of fiducial sequences of horizontal-branch stars in bright Galactic globular clusters, which have previously been observed in the Sloan Digital Sky Survey (SDSS). We derive fiducial lines on color-magnitude diagrams in multiple color indices (g - r, g - i, g - z, and u - g), after rejecting foreground and background objects as well as RR Lyrae variables utilizing these color indices. We compare our fiducial sequences with model predictions from Yonsei-Yale evolutionary tracks and BaSel spectral libraries, and find a satisfactory agreement between them in terms of their color-magnitude relations, except in u - g. We also compare theoretical models to color-magnitude diagrams of two open clusters (M67 and NGC 6791). Based on our best available cluster distance and reddening, we find that the mass of red clump (RC) stars in NGC 6791 is about a factor of two smaller than an earlier estimate from the application of asteroseismic scaling relations for solar-like oscillations. The smaller RC mass implies an enhanced mass loss along the red giant branch, which is in accordance with other compelling evidences found in this metal-rich system. Our estimated luminosity of RC stars in NGC 6791 is about 0.2 mag fainter than in earlier investigations based on solar-metallicity calibrations, and results in ~10% reduction in the RC-based distance estimation, when applied to metal-rich systems such as in the Galactic bulge.

• Journal of the korean society of oceanography
• /
• v.38 no.2
• /
• pp.80-86
• /
• 2003

The horizontal distributions of $^{224}Ra$ (half life=3.4 days) and $^{223}Ra$ (half life=11.3 days) were measured in surface seawaters of the Nakdong River estuary and the South Sea of Korea in April and October 2002. In order to determine these short-lived Ra isotopes, we used a delayed coincidence counter which is much more rapid and accurate than traditional methods. In an estuarine mixing zone (salinity, ~l6 ppt), the activities of $^{224}Ra\;and\;^{223}Ra$ were much greater than what would be expected from a mixture of freshwater and seawater in the Nakdong River estuary. This excess Ra may be a result of Ra desorption from fresh sediments originating from the river upstream. However, in the more open areas of the Nakdong River estuary (salinity>30 ppt) and the South Sea of Korea, $^{224}Ra\;and\;^{^{223}Ra$ activities decreased exponentially as a function of distance offshore. Using the decrease of $^{223}Ra$ with distance offshore in the South Sea of Korea, we estimated the apparent horizontal eddy diffusivities. The apparent eddy diffusion coefficients in South Sea of Korea are calculated to be approximately $3500-8000\;\textrm{m}^2/sec$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.3
• /
• pp.158-166
• /
• 2019

Objectives: Inferior alveolar nerve block (IANB) is the most frequently used treatment for mandibular molars. Successful IANB requires insertion of the dental needle near the mandibular foramen. In this study, we aimed to analyze the anatomic location of the mandibular lingula and evaluate the effects of internal oblique ridge (IOR)-guided IANB. Materials and Methods: The location of the mandibular lingula was measured using cone-beam computed tomography images of the mandibles obtained from 125 patients. We measured the distances from the occlusal plane to the lingula and from the IOR to the lingula in 250 mandibular rami. Based on the mean of these distances, alternative anesthesia was carried out on 300 patients, and the success rate of the technique was evaluated. Results: The mean vertical distance was $8.85{\pm}2.59mm$, and the mean horizontal distance was $14.68{\pm}1.44mm$. The vertical (P<0.001) and the horizontal (P<0.05) distances showed significant differences between the sex groups. The success rate of the IOR-guided technique was 97.3%. Conclusion: IANB-based location of mandibular lingula showed a high success rate. From this study, we concluded that analysis of the anatomic locations for mandibular lingula and IOR-guided IANB are useful for restorative and surgical dental procedures of the mandibular molars.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2021

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performance-centered design.

• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.365-371
• /
• 1999

Ture diplacement of a fault monement is calculated from the displacement of the index plane such as bedding on an outcrop surface. The input parameters are the orientations of the index, fault, and outcrop planes. It is also necessary to input the orientation of fault striation and the offset distance of the index plane on the outcrop surface. The distances of the total, strike, horizontal and dip slip components of the fault movement are calculated from the input parameters. Hwang(1998) conducted a simlar calculation using trigonoment method. To apply the previous method, the offset distance of the index plane must be measured on a vertical outcrop surface. The calculation method of this study accepts the offset distence of index plane on an outcrop plane of any orientation. Calculation results from both method are indentical, regardless of the simplicity of the new method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.32-38
• /
• 2007

In this study, a new algorithm for measuring the velocity and distance from a camera to a moving object by using pseudo-stereo images obtained from a single camera with a stereo adapter is proposed. The proposed system is similar to a parallel visual stereo system using a two-camera system, but because this system can obtain pseudo-stereo images form a single camera, it has advantages not only in the aspect of cost but also in stereo conformity by arrangement and the calibration of the left and right stereo cameras upon image processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1508-1512
• /
• 2005

A real time tracking and matching of the screen cursor corresponding to the iris moving by measuring distance between vertical movement and horizontal movement of iris is presented in this paper. The screen cursor is tracked and matched with the distance md direction moving the center-positioned coordinate of iris. The experimental result shows that the moving of iris and screen cursor are accord with distance and size of screen and the optimal tolerance is reduced the tracking error.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1022-1027
• /
• 2001

In this study, the train-induced vibration was measured at many locations at/around the actual service lines and the data base was constructed using the measurement results. The characteristics of train induced ground vibration was categorized and the empirical ground vibration estimating equations were developed. On the ground area (level grounds, embankments, cut sections), the vibration estimating equations were developed in terms of ground vibration level which was related with the distance from the source. Especially for the cut section areas, the vibration levels were expressed with the vibration receiving point expressed by the ratio of vertical distance to horizontal distance(V/H) from the source. As a result, when V/H is 0.96, the vibration estimating equation gives a minimum vibration level.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.339-339
• /
• 2000

In this parer, a method of measuring the size of defects on the wall and restructing the defect image of 3-dimension is developed based on the tracking algorithm of a camera position which uses the inclination angle of line slit beam for overcoming the difficulty of the corresponding problem identifying the image point in the both image. In the experiments, an algorithm for estimating the horizontal angle of CCD camera is presented and validated by applying it to the measurement of area and length under the variations of both the distance and the angle of CCD camera. And its performance is compared to that of the rotating and mapping method of image which has the Euclidian distance.