• 제목/요약/키워드: Hopping Method

검색결과 157건 처리시간 0.022초

OFDM/SFH와 OFDM/DS 시스템의 Jamming 채널에서 성능비교 (Performance Comparison of the OFDM/SFH and OFDM/DS Systems in the Jamming Channel)

  • 박종현;김상우;유흥균;이상태
    • 한국전자파학회논문지
    • /
    • 제14권11호
    • /
    • pp.1149-1155
    • /
    • 2003
  • OFDM/SFH 시스템은 OFDM통신시스템이 재밍에 잘 견디게 하기 위하여 주파수 도약(FH) 방식과 결합한 시스템이고, OFDM/DS 시스템은 PN(pseudo noise) 시퀀스에 의한 대역 확산(DS) 방식과 결합한 시스템이다. 본 연구에서는 OFDM/SFH 시스템과 OFDM/DS 시스템을 동일한 정보량을 기준으로 부분대역 재밍과 톤 재밍이 있는 채널 환경 에서 성능을 분석한다. 부분대역 재밍 에서는 JFR(jamming functional ratio)과 JSR(jamming to signal power ratio) 변화에 따른 BER성능을 분석하며, 단일 톤 또는 다중 톤 재밍에서의 JSR에 따른 BER성능을 분석한다. 그 결과 부분대역 재밍에서는 OFDM/DS 시스템이 OFDM/SFH 시스템보다 우수한 성능을 보인다. JFR=4/16이고, JSR=0 ㏈일 때 BER=$10^{-3}$을 기준으로 OFDM/DS 시스템 이 OFDM/SFH 시스템보다 약 2,5 ㏈ 정도의 SNR(signal to noise power ratio) 이득이 있다. 그러나 단일 톤이고, JSR=5 ㏈일 때 BER=$10^{-3}$을 기준으로 OFDM/SFH 시스템이 OFDM/DS 시스템보다 3 ㏈ 정도의 SNR 이득이 있다. 한편 다중 톤인 경우 OFDM/SFH 시스템의 성능 저하가 OFDM/DS 시스템에 비해 크게 나타난다.

효율적인 주파수 이용을 위한 주파수 공유 방법 (A Frequency-Sharing Method to Use Frequency Resources Efficiently)

  • 강상기;황택진
    • 한국정보통신학회논문지
    • /
    • 제12권8호
    • /
    • pp.1349-1355
    • /
    • 2008
  • 최근에 ZigBee, Bluetooth, RFID(Radio Frequency Identification)와 같은 근거 리 무선통신 시스템에 대한 연구가 활발히 진행되고 있으며, 이와 같은 시스템들은 대부분 소출력무선기기들이다. 미래에는 개인을 중심으로 하는 WPAN(Wireless Personal Area Network)을 위해서 더 많은 소출력 무선기기들이 출현할 것이며, 간섭저감기술은 소출력무선기기들이 한정된 주파수 자원을 효율적으로 이용하기 위한 필수 기술이 될 것으로 예상된다. 본 논문에서는 두 가지의 주파수를 공유 방법을 고려하였다. 첫 번째는 이미 특정 시스템에 할당된 주파수를 공유하는 경우이고, 두 번째는 새로운 주파수대역을 할당하는 경우이며, 이 두 가지 경우에 대한 효율적인 주파수 공유 방법을 연구하였다. 첫 번째 방법으로 주파수출 공유하는 경우의 한 가지 예로서 ZigBee, RPID, DCP(Digital Cordless Phone) 및 Bluetooth가 특정 주파수대역을 공유하는 경우 주파수 공유 조건을 검토하였다. 그리고 두 번째 공유 방법에서는 서로 다른 간섭저감기술을 사용하는 통신시스템에 대해서 공평한 신호 방사조건을 유지하기 위한 balancing factor의 개념을 제안하였으며, FH(Frequency Hopping) 시스템을 기준으로 하는 경우 LBT(Listen Before Talk)는 0.9, DS (Direct Spreading)은 0.8의 balancing factor를 이 용하면, 이들 간섭저감기술들 사이의 방사조건을 비슷하게 유지 할 수 있기 때문에 전체적으로 더 많은 시스템이 주파수를 공유할 수 있음을 보였다.

NASICON 고체 전해질의 이온 전도도 계산 (III) 전도경로가 Na1$\longrightarrow$mid-Na$\longrightarrow$Na2인경우 (Computation of Ionic Conductivity at NASICON Solid Electrolyte (III) Na1$\longrightarrow$mid-Na$\longrightarrow$Na2 Conduction Paths)

  • 최진삼;서양곤;강은태
    • 한국세라믹학회지
    • /
    • 제33권6호
    • /
    • pp.645-652
    • /
    • 1996
  • The ionic conductivity of NASICON (Na Super Ionic Conductor) solid electrolyte was simulated by using Monte Carlo Method (MCM)based on a hopping model. We assumed that the conduction path of Na ions is Na1→mid-Na→Na2 where the mid-Na sites are shallow potential sites to induce 'a breathing-like movement' of Na ions in the NASICON framework. The minimum of charge correlation factor Fc and the maximum of appeared at nearby x=2.0 The occupancy of mid-Na site affected the depth of potential barrier and the conduc-tivity of the NASICON. At above x=0.3 ln σT vs. 1/T* plots have been shown Arrhenius behavior but in (VWfc)vs. 1/T* have been shown the Arrhenius type tendency at x=1 MCM results accorded with the experi-mental procedure. The role of mid-Na on Na+ ion conduction could be explained by an additional driving force and a breating-like movement model for motions of Na+ ions in the NASICON framework. As we couldn't clearly remarked the model which is the better it seems reasonable to conclude that these hypothesies are suitable to explain the FIC behavior at NASICON.

  • PDF

대각 위성간 링크를 허용하는 극궤도 이동위성통신 시스템의 수학적 모델링 및 성능분석 (Mathematical Modeling and Performance Analysis of Polar Orbit Mobile Satellite Communication System Utilizing Both Neighboring and Diagonal Link)

  • 양혁;김덕년
    • 전자공학회논문지S
    • /
    • 제36S권8호
    • /
    • pp.17-29
    • /
    • 1999
  • 극궤도 위성에서의 위성간 링크를 사용하는 이리듐 시스템은 위성간 링크 통신이 핵심적인 기술이 된다. 이 시스템에서는 링크설정 면에 있어서 이웃 위성간에만 링크를 설정한다. 이는 위성간 통신을 할 동안 연결을 계속 유지해야 통신이 유지되는 단점을 가지고 있다. 제안된 새로운 시스템은 이웃 이성간 링크 뿐만 아니라 대각링크까지 허락하여 연속되는 위성간의 연결 수를 최소화하고 트래픽 부하를 중심으로써 통신 성능의 향상을 증명한다. 그리고 위성고도와 가시 위성간 거리에 따르는 최적 전개 위성 수를 계산하였다. 또한 제시한 시스템의 트래픽 파라메터와 블록킹 확률을 수학적으로 분석하여 이웃이성간 링크 방식과 성능을 비교하였다.

  • PDF

Lower Extremity Stiffness Characteristics in Running and Jumping: Methodology and Implications for Athletic Performance

  • Ryu, Joong Hyun
    • 한국운동역학회지
    • /
    • 제28권1호
    • /
    • pp.61-67
    • /
    • 2018
  • Objective: The human body is often modelled as a spring-mass system. Lower extremity stiffness has been considered to be one of key factor in the performance enhancement of running, jumping, and hopping involved sports activities. There are several different classification of lower extremity stiffness consisting of vertical stiffness, leg stiffness, joint stiffness, as well as muscle and tendon stiffness. The primary purpose of this paper was to review the literature and describe different stiffness models and discuss applications of stiffness models while engaging in sports activities. In addition, this paper provided a current update of the lower extremity literature as it investigates the relationships between lower extremity stiffness and both functional performance and injury. Summary: Because various methods for measuring lower extremity stiffness are existing, measurements should always be accompanied by a detailed description including type of stiffness, testing method and calculation method. Moreover, investigator should be cautious when comparing lower extremity stiffness from different methods. Some evidence highlights that optimal degree of lower extremity stiffness is required for successful athletic performance. However, the actual magnitude of stiffness required to optimize performance is relatively unexplored. Direct relationship between lower extremity stiffness and lower extremity injuries has not clearly been established yet. Overall, high stiffness is potentially associate risk factors of lower extremity injuries although some of the evidence is controversial. Prospective injures studies are necessary to confirm this relationship. Moreover, further biomechanical and physiological investigation is needed to identify the optimal regulation of the lower limb stiffness behavior and its impact on athletic performance and lower limb injuries.

Anti-Reactive Jamming Technology Based on Jamming Utilization

  • Xin Liu;Mingcong Zeng;Yarong Liu;Mei Wang;Xiyu Song
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권10호
    • /
    • pp.2883-2902
    • /
    • 2023
  • Since the existing anti-jamming methods, including intelligent methods, have difficulty against high-speed reactive jamming, we studied a new methodology for jamming utilization instead of avoiding jamming. Different from the existing jamming utilization techniques that harvest energy from the jamming signal as a power supply, our proposed method can take the jamming signal as a favorable factor for frequency detection. Specifically, we design an intelligent differential frequency hopping communication framework (IDFH), which contains two stages of training and communication. We first adopt supervised learning to get the jamming rule during the training stage when the synchronizing sequence is sent. And then, we utilize the jamming rule to improve the frequency detection during the communication stage when the real payload is sent. Simulation results show that the proposed method successfully combated high-speed reactive jamming with different parameters. And the communication performance increases as the power of the jamming signal increase, hence the jamming signal can help users communicate in a low signal-to-noise ratio (SNR) environment.

다중 직교 특성을 갖는 FH-MFSK 방식의 수중음향통신 (Underwater Acoustic Communication of FH-MFSK Method with Multiple Orthogonal Properties)

  • 이형우;김기만;손윤준;김우식;천승용;이상국
    • 한국음향학회지
    • /
    • 제33권6호
    • /
    • pp.407-412
    • /
    • 2014
  • 본 논문에서는 다중 직교 특성을 갖는 FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) 방식의 수중음향통신을 제안한다. 일반적으로 FSK(Frequency Shift Keying) 방식은 처리 과정이 단순하지만 다중 경로 전달로 인해 발생하는 인접 심볼간 간섭에 취약하다. 본 논문에서는 전송하고자 하는 심볼 수와 동일한 서로 직교 성질을 갖는 코드들을 생성한다. 이 코드 값들은 각각 다수의 주파수들에 대응된다. 이러한 다중 직교 코드를 생성하기 위해 m-sequence를 이용하였다. 실험을 통해 제안된 방법의 성능을 기존의 MFSK 방식과 비교하였다. 100 bps 전송율에서 제안한 방법은 기존의 방법보다 오차율이 6 ~ 10 % 낮게 나타났다.

방화벽이 존재하는 캠퍼스 망에서의 P2P 트래픽 측정 및 분석 (Measurement and Analysis of P2P Traffic in Campus Networks Under Firewall)

  • 이영석
    • 한국통신학회논문지
    • /
    • 제30권11B호
    • /
    • pp.750-757
    • /
    • 2005
  • 본 논문은 P2P 트래픽을 차단시키는 방화벽이 존재하는 고속의 캠퍼스 망에서 세 개의 P2P 응용 트래픽을 장기간 측정하고 분석한 결과를 제시한다. P2P 트래픽을 탐지하기 위하여 다양한 방법들이 제안되고 있지만, 현재가장 간단하고도 비용이 저렴한 방법은 포트 번호를 이용한 방화벽이다. 이 방화벽이 설치되고 난 이후 대량의 P2P 트래픽이 줄어들 것으로 예측되었지만, 8개월간의 트래픽 측정 결과 세 개의 새로운 P2P 응용 트래픽($30\%$ 업로드, $5.6\%$ 다운로드 트래픽)과 포트번호를 숨기는 eDonkey P2P 응용 트래픽($6.7\%$ 업로드 트래픽, $4\%$ 다운로드 트래픽)으로 인하여 본 연구에서 판별한 P2P트래픽 양이 다시 증가하였다. 본 논문에서 수행한 장기간 트래픽 측정결과는 포트번호를 이용하는 트래픽 필터링 기법이 P2P 응용 탐지에 효과적이지 많다는 것을 보여주었고, 본 캠퍼스 망에서 관찰된 세가지 P2P 트래픽은 P2P응용 프로그램의 보상 체제와 고속의 캠퍼스 망 연결 등의 이유 때문에 의부로 향하는 업로드 트래픽의 양이 크다는 것을 보여주었다.

이차원 SnSe2 전자소재의 Cl 도핑에 따른 고온 전도 물성 고찰 (Study on the Change of Electrical Properties of two-dimensional SnSe2 Material via Cl doping under a High Temperature Condition)

  • 문승필;김성웅;손희상;김태완;이규형;이기문
    • 마이크로전자및패키징학회지
    • /
    • 제24권2호
    • /
    • pp.49-53
    • /
    • 2017
  • Cl 불순물 도핑에 따른 $SnSe_2$ 이차원 전자소재의 고온(300~450 K) 전도 물성 변화를 고찰하였다. 고상합성법을 통하여, 도핑이 없는 $SnSe_2$ 소재와 Cl이 도핑된 $SnSe_{1.994}Cl_{0.006}$ 소재를 합성하였으며, X선 회절 실험을 통하여, 두 재료 모두 불순물 없는 단일상이 형성되었음을 확인하였다. 비저항의 온도의존성 측정을 통하여, 전기 전도 mechanism이 Cl 도핑에 의해 hopping 전도에서 축퇴 전도로의 전이가 일어남을 관찰할 수 있었으며, 홀효과 측정을 통해 그러한 전도 mechanism의 전이가, Cl의 효과적인 donor 역할에 따른 자유전자의 농도 증가에서 기인한 것임을 확인하였다. 온도에 따른 전자이동도의 변화 분석을 통하여, 도핑이 없는 $SnSe_2$의 고온 전기 전도는 grain boundary 산란이 지배적인 영향을 미치는 반도체 전도 특성을 보이는 반면, Cl 도핑에 따라 grain boundary 산란 효과가 저하되는 금속 전도 특성을 보인다는 것을 알 수 있었다.

널은 띠간격 묽은 자성반도체 CuAl1-xMnxO2 세라믹스의 구조 및 전자기 특성 (Structural, Electrical and Magnetic Properties of Wide Bandgap Diluted Magnetic Semiconductor CuAl1-xMnxO2 Ceramics)

  • 지성화;김효진
    • 한국재료학회지
    • /
    • 제14권8호
    • /
    • pp.595-599
    • /
    • 2004
  • We investigated the structural, electrical and magnetic properties of Mn-doped $CuAlO_2$ delafossite ceramics ($CuAl_{1-x}Mn_{x}O_2,\;0\le\;x\;\le0.05$), synthesized by solid-state reaction method in an air atmosphere at a sintering temperature of $1150^{\circ}C$. The solubility limit of Mn ions in delafossite $CuAlO_2$ was found to be as low as about 3 $mol\%$. Positive Hall coefficient and the temperature dependence of conductivity established that non-doped $CuAlO_2$ ceramic is a variable-range hopping p-type semiconductor. It was found that the Mn-doping in $CuAlO_2$ rapidly reduced the hole concentration and conductivity, indicating compensation of free holes. The analysis of the magnetization data provided an evidence that antiferromagnetic superexchange interaction is the dominant mechanism of the exchange coupling between Mn ions in $CuAl_{1-x}Mn_{x}O$ alloy, leading to an almost paramagnetic behavior in this alloy.