• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.160-168
• /
• 2018

Among the components of rotary hooks, a core component of an embroidery sewing system, a study was conducted to apply metal injection molding to the manufacture of a hook body and a housing that was very difficult to mechanical working. The correlation of feedstock, a mixture of binder and SCM 415 metal powder, and properties of the pressure-volume-temperature interrelationship, viscosity, specific heat, and thermal conductivity were measured. Injection molds for the hook body and the housing were developed through injection molding analysis using these properties and conducted injection tests. Optimal injection gate position and number, injection pressure, and injection time were obtained through a comparison of analysis results with the experiment results.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.89-99
• /
• 1990

Morphology, anatomy and diurnal acid fluctuations were investigated monthly for the succulent C4 dicot Portulaca grandiflora Hook. growing under natural environmental conditions. Modified Kranz-Type sturcture and typical CAM-like cells were shown in leaves and stems, respectively. Values of indices of mesophyll succulence inleaves stems were 5.62 and 16.68, respectively. The number of stomata were 1476$\textrm{cm}^{-2}$ in leaves while the stomata in stems were not observed through growing seasons from spring to summer. However, on Sep. 16, 1981 in defoliate autumn season, stomata were begun to be produced for the first time in stems and the number were increased gradually to 216$\textrm{cm}^{-2}$ on Oct. 29. This feature can be interpreted as a seasonal plant dimorphism. P. grandiflora exhibited a diurnal fluctuation of titratable acidity in leaves and stems. Seasonal amplitudes of acid fluctuation in stems were as follows: 27 $\mu$eq./g.f.wt. on Sep. 21; 57$\mu$eq/g.f.wt. on Oct. 3; 80$\mu$eq./g.f.wt. on Oct. 21. Such the results in seasonal amplitude were able to consider due to decrease of light period and cool night air temperature according to change of season. Also, the naturally defoliated stems which had already stomata exhibited usual diurnal acid fluctuation, on the other hand the treated stems which possessed artificially closed stomata showed a few of acid fluctuation. Especially, stomata in stems are developed by seasonal dimorphism and activated stomata participate in CAM behavior of stems.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2003.10a
• /
• pp.75-75
• /
• 2003

The objective of this study is to investigate the effect of Codonopsis lanceolata Bentk et Hook on the growth of lactic acid bacteria and some harmful bacteria. Extract of C. lanceolata was obtained by hydrothermal extraction method and used intactly without concentration. To investigate the inhibitory effect on the growth of harmful bacteria, we used agar dilution method. On agar plate containing more than 25% extract, they showed decreased number of colonies. (omitted)

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.150-160
• /
• 2019

Objective: This study aimed to analyze the effect of changing various parameters of the bone-borne rapid palatal expander (RPE) using the finite element method (FEM). Methods: In eight experimental groups, we investigated the effect of the number, position, and length of miniscrews; positional changes of the expander; and changes in the hook length on maxillary expansion. In finite element analysis, we compared the magnitude and distribution of stress, and the displacement changes following expansion of the bone-borne RPE. Results: When we compared the number and position of miniscrews, placing miniscrews in the anterior and posterior sides was advantageous for maxillary expansion in terms of stress distribution and displacement changes. Miniscrew length did not significantly affect stress distribution and displacement changes. Furthermore, anteroposterior displacement of the expander did not significantly affect transverse maxillary expansion but had various effects on vertical changes of the maxilla. The maxilla rotated clockwise when the miniscrews were placed in the anterior region. The hook length of the expander did not show consistent results in terms of changes in stress distribution and magnitude or in displacement changes. Conclusions: The findings of this study suggest that changes in the location and length of the miniscrews and displacement of the bone-borne RPE could affect the pattern of the maxillary expansion, depending on the combination of these factors.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.84-89
• /
• 2021

Recently, shipyards are making many efforts to reduce the number of the mounted blocks by increasing the block size. This is to improve productivity and reduce related costs by minimizing block movement and shortening the building period. However, as the blocks become larger, the weight increases considerably. If the target block has a damage due to an unexpected accident during block lifting, it may seriously cause a problem of the reusability of the block. In this study, a large-sized block of the offshore structure weighing 480 tons was lifting with a total of seven sling belts, and one sling belt was broken while it was moving, resulting in a situation in which a part of the edge of the block collided with the ground. The aim of this paper is to verify the structural integrity of the block that directly collides with the ground in the form of free fall due to the sling breakage. Considering that the hook loads acting on several sling belts holding the block are redistributed when a sling belt is broken, the hook loads were recalculated at the angle just before the sling breakage. These loads were used to check the safety of the sling belts. In addition, FE analysis was performed by calculating the amount of impact from the free fall condition, obtaining the impact area by using Hertz's contact theory, and then applying the impact load to the area.

• Korean Journal of Mathematics
• /
• v.16 no.3
• /
• pp.425-437
• /
• 2008

Let P be a poset and G = G(P) be the incomparability graph of P. Stanley [7] defined the chromatic symmetric function $X_{G(P)}$ which generalizes the chromatic polynomial ${\chi}_G$ of G, and showed all coefficients are nonnegative in the e-expansion of $X_{G(P)}$ for a poset P of rank 1. In this paper, we construct a sign reversing involution on the set of special rim hook P-tableaux with some conditions. It gives a combinatorial proof for (3+1)-free conjecture of a poset P of rank 1.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.5
• /
• pp.701-706
• /
• 2007

Recently, a number of researches about linear magnetorheological(MR) damper using valve-mode characteristics of MR fluid have sufficiently undertaken, but researches about rotary MR damper using shear-mode characteristics of MR fluid are not enough. In this paper, we performed vibration control of shear-mode MR damper for unlimited rotating actuator of mobile robot. Also fuzzy logic based vibration control for shear-mode MR damper is suggested. The parameters, like scaling factor of input/output and center of the triangular membership functions associated with the different linguistic variables, are tuned by genetic algorithm. Simulation results demonstrate the effectiveness of the fuzzy-skyhook controller for vibration control of shear-mode MR damper under impact force.

• Microbiology and Biotechnology Letters
• /
• v.31 no.4
• /
• pp.322-328
• /
• 2003

The Transformation-Associated Recombination (TAR) cloning technique allows selective isolation of chromosomal regions and genes from complex genomes. The procedure requires knowledge of relatively small genomic sequences that reside adjacent to the chromosomal region of interest. This technique involves homologous recombination during yeast spheroplast transformation between genomic DNA and a TAR vector that has 5'and 3' gene targeting sequences. In this study, we examined the minimum size of specific hooks required for a single-copy gene isolation and compared the utility of different TAR vectors, radial and unique vectors, by cloning the same single-copy gene. The efficiency of TAR cloning of the hHPRT gene was same using hooks varying from 750 to 63 bp. The number of transformants decreased approximately 20-fold when the TAR vector contained two unique hooks versus using a radial vector, but the percentage of positive recombinants increased over 2-fold when a unique TAR vector was used. Therefore, we suggest that the two-unique TAR vector is suitable for general TAR cloning given its high selectivity, and the radial TAR vector is more suitable when genomic DNA is in limited quantity, for example, DNA isolated from pathological specimens. Moreover, we confirm the minimal length of a unique sequence in a TAR vector is approximately 60 bp for a single-copy gene isolation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.184-193
• /
• 2008

For environment-friendly fishery, the lead sinkers of octopus drift line were developed with the environmentfriendly sinker, and their characteristics and performance were investigated. To make the environmentfriendly sinker, the hydrate ceramic material was developed, and to increase the weight and strength, the iron power was added to it. The fishing hook was machine-made, and standardized, by using 60cm iron wire. For the manufacture of the sinker, the first, the mold was made, and then, hydrate ceramic material and water were quantitatively mixed. The mixture was poured into the mold prepared with a fishing hook already inserted, and had hardened for several hour, before it was taken out of the mold as a complete sinker. The sinkers were made in the 8 types ranging in weight from 150 to 500g, and their specific gravities were diverse from 2.871 to 6.637, which was 0.19 to 0.44 times lower than that of lead. The movement of the environment-friendly sinker by flume tank was possible in the weaker current speed than the similar lead sinker. In the coastal fishing grounds of Gangwon province, the comparison of catching efficiency was made between the improved fishing gears composed of the environment-friendly sinkers and artificial baits, and the current used fishing gears of lead sinkers and pig-fat baits. The result showed the tendency in which the improved fishing gears caught the bigger octopuses than the current used fishing gears. In the quantity and number of the fish catch per unit fishing gear, the improved fishing gear showed a little more catch than the current used fishing gear, regardless of the fishing area. However, the number of the improved fishing gears lost during fishing operation was similar to that of the current used fishing gears.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.157-160
• /
• 1988

This paper describes the development of the Interfacing unit between PSTN and interphone network. The designed and realised system detects the ring signal from PSTN and makes off-hook condition when it is detected. Then the caller can hear the response tone from the unit and the tones of the interphone network condition. The developed system receives the interphone number to which the caller wants to connect by MFC tones and drives Interphone switch matrix. Thus, a call is connected to the interphone user directly. The caller may press the interphone number up to 10 digits and the last two of which are recognized as valid ones. The caller must press the first digit within 20 seconds after system response.