• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.126-131
• /
• 2017

To improve the efficiency of hairtail trolling, it is important to gain an accurate understanding of the distribution of fish based on their diurnal vertical migration patterns. This study evaluated the vertical distribution of hairtails through catch efficiency tests using vertical longlines. Five replicate tests of the efficiency were carried out on the eastern coast of Jeju Island from August to September 2016, from 11:00 AM to 03:00 PM in the daytime and 11:00 PM to 03:00 AM in the nighttime. The fishing gear was composed of 20 hooks per line set, numbered in order from the first hook near the surface to the last hook on the seabed. The depth of the first hook was 18 m, and that of the last hook was 86 m. Pacific saury was used as the baits. In total, 10 sets of fishing gear were used per trip. After fishing, we counted the hairtails at each numbered hook, which were summed up both by number and in aggregate. A total of 232 hairtails were caught using 2,000 hooks: 193 individuals at daytime and 39 at nighttime. The hook rate was 11.5% : 9.6% at daytime; 2.0% at nighttime. For both daytime and nighttime catches, there were variations in the hook rates at each numbered hook. In the daytime, a maximum of 28.5% catches occurred at hook number 18, followed by 21.4% at number 20, and 10.7% at number 17, accounting for 60.6% of the daytime hook rates. In the nighttime, a maximum of 23.0% catches occurred at hook number 1, followed by 15.3% at hook number 4 and 9, accounting for 53.6% of the nighttime hook rate. Based on the above results, hairtails are usually distributed in deeper region in daytime, whereas they occur near the surface in nighttime. Therefore, it is necessary to position trolling lines according to diurnal vertical distribution layers of hairtails for fishing efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.81-87
• /
• 2008

C-Hook is a kind of conveyer system for transporting steel coil in POSCO. To detect the current position and the trajectory of steel coils in a plant, C-Hooks are tracked by an inspection system based on PLC. The inspection system detects transit of C-Hooks by monitoring a physical contact between steel bars on a C-Hook and the inspection sensors. However, this system is not reliable because of the abrasion, damage and aging. Moreover, the number of distinguishable C-Hooks is limited by the number of combination of steel bars on a C-Hook. It means that more steel bars should be installed for distinguishing the more C-Hooks. Therefore, the conventional system is difficult and expensive to maintain. To overcome these problems, we propose a C-Hook identification system that uses RFID which is a non-contact type identification system, and evaluate its performance and applicability from a new monitoring program that operates along with the conventional system in the real environment of POSCO.

• Korean Journal of Mathematics
• /
• v.18 no.3
• /
• pp.289-298
• /
• 2010

E$\breve{g}$ecio$\breve{g}$lu and Remmel [1] gave a combinatorial interpretation for the entries of the inverse Kostka matrix $K^{-1}$. Using this interpretation Sagan and Lee [8] constructed a sign reversing involution on special rim hook tableaux. In this paper we generalize Sagan and Lee's algorithm on special rim hook tableaux to give a combinatorial partial proof of $K^{-1}K=I$.

• Korean Journal of Ichthyology
• /
• v.20 no.2
• /
• pp.105-111
• /
• 2008

A pelagic tuna longline research cruise in the eastern and central Pacific Ocean from September to October of 2006 was conducted to compare catch rates with the use of different hook type and bait combinations. Traditional tuna hooks (J 4) and three circle hook types (C15, C16, C18), along with five bait types (chub mackerel (CM), jack mackerel (JM), milkfish (MF), sardine (SD), and squid (SQ)) and hook number as a proxy for hook depth were evaluated for their effect on bigeye tuna catch rates (fish per 1,000 hooks) using Generalized Linear Models (GLMs). Results from 28 sets indicated significant differences in bigeye catch rates between individual longline sets and hook number. The GLM explained 33% of the deviance in bigeye catch rates with these two factors. An alternative model formulation included bait type which had a small effect (explaining 2.7% of the deviance) on catch rates. Hook type had a negligible and non-significant effect in the GLMs. These results indicate that all of the hooks and baits tested are equally effective at catching bigeye tuna and that hook number (depth) was the paramount operational factor in explaining bigeye tuna catch rates.

• Journal of the Korean Mathematical Society
• /
• v.32 no.4
• /
• pp.713-724
• /
• 1995

In 1954 Frame, Robinson and Thrall [5] gave the hook formula for the number of standard Young tableaux of a given shape. Since then many proofs for the hook formula have been given using various methods. See [9] forprobabilistic method and see [6] or [12] for combinatorial ones. Regev [10] has given asymptotic values for these numbers and Gouyou-Beauchamps [8] gave exact formulas for the number of standard Young tableaux having n cells and at most k rows in the cases k = 4 and k = 5.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.55-60
• /
• 2001

Influencing factors on flexural toughness of ring-type fiber reinforced concrete(RSFRC) are investigated. An experiment proceeding ASTM C 78 is peformed to make a comparison between ring-type fibers and double-hook type fibers. Most specimen with ring type fibers have failed by the cone type failure, while discrete hook type fibers have failed by fiber pullout. For the hook-type fiber reinforced concrete(SFRC), the first crack load increases, as the fiber mixing volume increases. Aspect ratio(fiber length/fiber diameter) is critical for hook type fibers, so the flexural toughness increases significantly, as the length of fiber increases. However, for the ring type, the toughness indices Increase as the number of fibers in the specimen increases. Since there is no bond problem between the ring fiber and the concrete matrix, the aspect ratio does not affect the performance of the composite material with the newly developed steel fibers. Influencing factors with respect to flexural toughness RSFRC were observed to be ring diameter, diameter of steel fiber and fiber content.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.285-293
• /
• 2020

This study evaluated the Hook-up installation of an offshore site construction process, which is the final step in an offshore site installation process. During Hook-up installation, the offshore structure can have a detrimental effect on the work stability due to low-frequency motion. Moreover, economic costs can be incurred by the increase in available days of a tugboat. Therefore, this study developed a numerical analysis program to assess the dynamic behavior of mooring systems during hook-up installation to analyze the generally performed installation process and determine when the tugboat should be released. In this program, the behavior of an offshore structure was calculated using Cummin's time-domain motion equation, and the mooring system was calculated by Lumped mass method (LMM). In addition, a tugboat algorithm for hook-up installation was developed to apply the Hook-up procedure. The model used in the calculations was the barge type assuming FPSO (Floating production storage and off-loading) and has a taut mooring system connected to 16 mooring lines. The results of the simulation were verified by comparing with both MOSES, which is a commercial program, and a calculation method for restoring coefficient matrix, which was introduced by Patel and Lynch (1982). Finally, the offset of the structure according to the number of tugboats was calculated using the hook-up simulation, and the significant value was used to represent the calculation result.

• Clinics in Shoulder and Elbow
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2016

Background: The goal of this study was to evaluate whether a modified fluoroscopic technique for positioning a hook plate affected the clinical results of treating Neer type II distal clavicle fractures and Rockwood type V acromioclavicular (AC) joint separations with this device. Methods: The study was a retrospective consecutive case series with data analysis. Sixty-four patients with a Neer type II distal clavicle fracture or a Rockwood type V AC joint injury treated between March 2009 and June 2013 were divided into 2 groups: traditional fluoroscopic technique (traditional view, 31 patients) or modified fluoroscopic technique ('hook' view, 33 patients). A visual analogue scale (VAS) score, the modified University of California-Los Angeles (UCLA) shoulder scale score, and radiographic osteolysis were the main outcome measures. Results: The traditional group included a significantly larger number of patients with acromial osteolysis than the hook view group: 23 patients (74.2%) vs. 11 patients (33.3%), respectively (p=0.01). Before plate removal, the hook group reported less pain and higher UCLA shoulder scale scores than the traditional group: average VAS score, 1.55 vs. 2.26, respectively; average UCLA score, 30.88 vs. 27.06, respectively. However, there was no significant difference after plate removal. Conclusions: The hook view allows more accurate bending of the hook plate around the contour of the acromion, resulting in decreased osteolysis, decreased pain, and better function with the plate in situ.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.4
• /
• pp.411-420
• /
• 2003

To examine the seed morphology in Korean Orobanchaceae, seeds of 5 species including 1 variety in five genera and one related taxon, Boschniakia himalaica Hook. f. & Thomson in Hook. f. from the Himalaya (7 taxa in total) were investigated by scanning electron microscopy (SEM). Two different seed types are recognized depending on three characters (e.g, .the seed size, seed coat structure and seed number per fruit). - Type I: size less than 1mm, seed coat structure reticulate and seed number per fruit more than ca. 1,000; Type II: size more than 1 mm, exotesta irregularly crested and seed number per fruit less than 1,000 (Lathraea japonicu Miq.). In Type I, three subtypes of exotesta internal surface pattern can also be classified; (1) Subtype Ia: reticulate - include irregularly striate (Ia') and deeply reticulate (Ia"), (2) Subtype Ib: foveolate, (3) Subtype Ic: smooth. Systematics application of the seed morphological data for the Korean Orobanchaceae is also briefly discussed.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.433-449
• /
• 1992

Three horticultural herbaceous plants and a natural herbaceous plant were tested to determine the growth responses, biomass and uptake of cadmium(cd), lead(pb) by application of cd and pb soil treatment in pot culture. The ecological effects on the growth of the plants were investigated to determine the tolerance for the heavy metal pollutants cd and pb. the marginal concentrain of cd treatment on the growth of the each plant was below the 1, 000 ppm treatment of cd. The marginal concentration of pb treatment was below the 1, 000ppm treatment of pb in cultivation of salvia splendens ker., celosia cristata l. and below the 3, 000ppm treatment of pb in cultivation of portulaca grandiflora hook., sedum saramentosum bunge. the resistance for cd of sedum saramentosum bunge, celosia criastata l., portulaca grandiflora hook. and salvia splendens ker. was in the listed order. The resistence for pb was in order of sedum saramentosum bunge, portulaca grandiflora hook. Salvia splendens ker.and celosia criastata l.stems. The flowering of portulaca grandiflora hook. was sustained in the pb 1, 000ppm treated group only. The higher the concentration of pb in the soil cultivated the plants was, the less the content of leaf chlorophy11 in each plant was. The number of stomata per unit leaf area was the highest in salvia splendens ker. and in order of celosia l., sedum saramentosum bunge., portulaca grandiflora hook., the higher the cd and pb concentration of cd and pb treatment was, the more the concent of cd and pb in the part of each plant increased. the content of cd and pb in the stems of salvia spiendens ker. was the highest in the 1, 000ppm-treated ground and in order of the roots, the leaves and the flowers.