• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.21-29
• /
• 2000

본 논문의 목적은 허니콤 코어로 보강된 샌드위치 항공기 구조물 제작 시 오토클레이브 성형 과정 중에 발생되는 결함의 원인을 분석하고, 이를 최소화시키는 것이 다 결과적으로 금형의 곡률, 코어 두께, 저글 높이 등과 같은 구조물 및 금형의 형상과 오토클레이브 경화 조건인 승온율, 승압율 등이 Core movement, Core wrinkle, core depression 및 bridge phenomenon 등의 결함 발생에 큰 영향을 미치고 있음을 알 수 있었다.

• Composites Research
• /
• 제19권1호
• /
• pp.9-14
• /
• 2006

본 연구는 KS F 2278 2003 (창호의 단열성 시험 방법)에 의하여 철도차량 및 버스의 내/외장재로 적용 가능한 카본/에폭시 스킨-알루미늄 하니콤 & 발사코어 샌드위치 판넬(두께 : 37mm), 카본/에폭시 스킨-알루미늄 하니콤 코어 샌드위치 판넬(두께 : 57mm, 단열재 포함) 및 카본/에폭시 스킨-알루미늄 하니콤 코어 샌드위치 판넬(두께 : 37mm)에 대한 열관류율 시험을 하였다. 또한 KS F2277 . 2002 (건축용 구성재의 단열성 측정방법-교정열상자법 및 보호열상자법)에 의하여 추가로 알루미늄 스킨-알류미늄 하니콤 샌드위치 판넬들 (두께 : 27mm, 35n1m)과 알루미늄 스킨-포밍 알루미늄 샌드위치 판넬 (두께27mm)에 대한 열관류율 시험을 수행하였다. 본 연구를 통해 면제와 심재사이에 열전달은 실제 단면적이 넓을수록 열관류율이 높았으며, 하이브리드형 복합재 일수록 단열성능이 우수함을 확인하였다.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.351-359
• /
• 2004

본 연구에서는 실선에 적용된 알루미늄 하니콤 샌드위치 판 (AHSP)을 저자가 제안한 심재의 형상이 피라미드인 알루미늄 샌드위치 판의 구조적 특성 및 진동특성을 검토해 보았다. 알루미늄 피라미드 샌드위치 판(APSP)의 기초 자료로 쓰일 수 있게 심재의 각도변화, 높이변화 및 면재와 심재의 두께변화에 따른 구조적 특성을 검토한 결과 APSP가 강도 및 강성에서 우수함을 보였으며, 질량대비 큰 강성 때문에 고유진동수도 다소 크게 평가되었다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.50-61
• /
• 2007

The structural stiffness, strength and stability on the bodyshell and floor structures of the Korean Low Floor Bus composed of laminate, sandwich panels and metal reinforced frame were evaluated. The laminate composite panel and facesheet of sandwich panel were made of WR580/NF4000 glass fabric/epoxy laminate, while aluminum honeycomb or balsa was applied to the core materials of the sandwich panel. A finite element analysis was used to verify the basic design requirements of the bodyshell and the floor structure. The use of aluminum reinforced frame and honeycomb core was beneficial for weight saving and structural performance. The symmetry of the outer and inner facesheet thickness of sandwich panels did not affect the structural integrity. The structural strength of the panels was evaluated using Von-Mises criterion for metal structures and total laminate approach criterion for composite structures. All stress component of the bodyshell and floor structures were safely located below the failure stresses. The total laminate approach is recommended to predict the failure of hybrid sandwich composite structures at the stage of the basic design.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.461-470
• /
• 2018

In this study, the effect of polyurethane foam filler, in addition to surface layer thickness and core material thickness, on vibration characteristics of sandwich structures was investigated. The manufacturing process was carried out according to the Taguchi method. The natural frequencies and damping ratios of the produced samples were determined experimentally for fixed-free boundary conditions. In addition, solid models were developed for test samples and their finite element analyses were performed with $ANSYS^{(R)}$ to obtain their natural frequencies and mode shapes. An acceptably good agreement was found with the comparison of experimental results with the numerically obtained ones. The most effective parameters on the vibration characteristics of the sandwich structure were determined by the Taguchi method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.841-844
• /
• 1997

Sandwich structure is widely used in various fields of industry due to its excellent strength and stiffness compared with weight. We studied the buckling and bending behavior with respect to the variation of design parameters such as length, height, and thickness of honeycomb sandwich core. We found that as the density and the thickness of core become higher, the value of critical bucking load increased significantly. We found that the effect of bending stress due to critical buckling load resulted in high bending stress and the value of bending stress decreased in half according to the increase of length of core. The effect by bending stress is dominant above the portion of the intersection line between bending stress and the effect of buckling is dominant below the potion of it. We could get proper thickness ratio and density of core according to applied load conditions.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.29-33
• /
• 2000

The purpose of this paper is to determine the effect of the autoclave inner pressure rate, heat-up rate, tool round angle, Thickness of core, height of joggle on defects, and to minimize the defects of aircraft sandwich structure reinforced with honeycomb core occurred in autoclave processing. The results showed that the geometry of aircraft sandwich structure and tool such as tool round angle, Thickness of core, height of joggle, and the autoclave cure conditions such as inner pressure rate, heat up rate strongly affected the core movement, core wrinkle, bridge phenomenon of prepreg and depression of core that occurred in autoclave processing.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.351-370
• /
• 2009

This paper presents a computational study for the structural response of blast loaded metallic sandwich panels, with the emphasis placed on their failure behaviours. The fully-clamped panels are square, and the honeycomb core and skins are made of the same aluminium alloy. A material model considering strain and strain rate hardening effects is used and the blast load is idealised as either a uniform or localised pressure over a short duration. The deformation/failure procedure and modes of the sandwich panels are identified and analysed. In the uniform loading condition, the effect of core density and face-sheets thicknesses is analysed. Likewise, the influence of pulse shape on the failure modes is investigated by deriving a pressure-impulse (P-I) diagram. For localised loading, a comparative study is carried out to assess the blast resistant behaviours of three types of structures: sandwich panel with honeycomb core, two face-sheets with air core and monolithic plate, in terms of their permanent deflections and damage degrees. The finding of this research provides a valuable insight into the engineering design of sandwich constructions against air blast loads.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.725-727
• /
• 2005

In this study, the sound transmission characteristics of honeycomb structures are investigated with changing its thickness, shear modulus, and surface density. Theoretical predictions of aluminum honeycomb panels are compared with experimental results, which can furnish an in depth understanding of the insulation characteristics of honeycomb panels.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.46-51
• /
• 2008

Honeycomb panel has a constructive advantage because it is constructed with a honeycomb core, so it has relatively higher strength ratio to weight. Therefore honeycomb panel has been used as the light weight panels in the high-speed railway technology and high-speed ship like as cruise yachts. Also it has been used in the aircraft and aerospace industry as a structural panel because light weight structure is indispensible in that field of industry. Recently, the honeycomb panel is embossed in the viewpoints of high oil prices as the lightweight panel of the transport machine, however the sound insulation capacity of the honeycomb panel is poorer than those of uniform and another sandwich panels. In this paper a method to improving the sound absorption coefficient of a honeycomb panel Is studied by using the Helmholtz resonator. The sound absorption coefficients for some kinds of honeycomb cores are demonstrated by the normal incident absorption coefficient method.