불안정한 생리활성물질들은 외부 환경에 의해 빠르게 분해된다. 그러므로 이러한 물질들을 안정화시키기 위한 캡슐화 기술은 매우 중요하다. 비타민 $D_3$의 전구체인 7-디하이드로콜레스테롤(7-DHC)은 일반인의 표피 각화세포에서 열충격 단백질(Heat Shock Protein)의 발현을 단백질과 mRNA의 수준에서 증가시키는 것으로 알려졌다. 하지만 7-DHC의 국소용 피부 제제로의 이용은 낮은 용해도와 화학적 불안정성 때문에 이용이 제한되었다. 본 연구에서 7-DHC는 나노에멀젼(NE), 고형 지질 나노 입자 (SLN) 그리고 키토산이 코팅된 고형 지질 나노 입자(CASLN)에 봉입하였다. NE와 SLN은 지질의 용융점 이상의 온도에서 고압의 호모제나이져를 통과시켜 제조하였다. CASLN은 SLN 분산액에 키토산을 용액을 첨가하여 제조하였으며 양(+)의 제타전위를 나타내었다. NE, SLN, CASLN 속에서 7-DHC의 안정도를 각각의 온도조건에서 시간의 경과에 따라 확인하였다. 열분석과 X선 회절 분석은 지질의 결정화 정도를 확인하기 위해서 수행하였다. 그 결과, CASLN은 기존의 SLN보다 불안정한 7-DHC를 효과적으로 봉입함으로서 안정성을 개선시켰다.
대두 중의 생리활성 성분을 효율적으로 이용하는 두부를 제조하기 위하여 초미세 전지대두분말에 단백분해효소를 첨가하여 비압착 전두부를 제조한 후 일반성분, 색도, 조직감특성, 관능검사를 실시하여 다음과 같다. 두유의 응고 형성능이 있는 단백분해효소로서는 Aspergillus sojae protease, bromelain papain이었고, 이 효소를 이용하여 두부를 제조한 결과 Aspergillus sojae protease가 가장 좋았다. 단백분해효소의 첨가 시기는 1차 가열한 두유를 균질화시켜 효소를 첨가하여 작용시킨 후 응고제를 첨가하여 2차 가열을 하였을 때 조직이 가장 좋았다. 단백분해효소와 응고제를 이용한 비압착 전두부의 일반성분은 시제품 연두부(대조구) 보다 수분 함량은 낮았고, 조단백질$.$조지방$.$회분 함량은 높았다. 단백분해효소와 응고제를 이용한 비압착 전두부는 대조구에 비해 L값과 b값은 높았고, 조직의 hardness, fracturability, springness, gumminess, chewiness가 높았으며 adhesiveness, cohesiveness는 낮았다. 단백분해효소와 응고제를 이용한 비압착 전두부의 외관 관능평가 결과는 대조구에 비해 표면의 매끄러움, 균열 정도, 횐 정도는 낮았고 노란정도는 높았으며 그 중에서 Aspergillus sojae protease 처리한 두부가 대조구와 비슷하였다. 단백분해효소와 응고제를 이용한 비압착 전두부의 향미 특성 관능평가 결과 대조구에 비해 삶은 콩 냄새, 볶은 콩가루 냄새, 떫은 느낌, 신맛, 쓴맛은 높았고 콩 비린 냄새는 낮았다. 단백분해효소와 응고제를 이용한 비압착 전두부의 조직 특성 관능평가 결과 대조구에 비해 강도, 내부 촉촉함, 거침성, 끈적거림, 입안에 남는 정도는 높았고 탄력성은 낮았다.
식품 중 발기부전치료제 및 유사물질 (anti-impotence drug-like compounds)인 실데나필, 바데나필, 타다라필, 호모실데나필, 홍데나필 및 하이드록시호모실데나필에 대해 고속액체크로마토그라피를 이용하여 동시분석을 시도하였다. 환제나 캅슐제 등 고체 시료의 경우 균질화한 후 일정량을 취하고, 드링크제 등 액체시료의 경우 일정량을 취하여 물에 희석한 후 유기용매로 추출하여 대상물질에 대해 photodiode array 스펙트럼의 최대흡수파장을 확인하였다. 인산을 함유한 아세토니트릴을 이동상으로 하고 $C_{18}$ 컬럼으로 분석한 결과 바데나필, 홍데나필, 하이드록시호모실데나필, 실데나필, 호모실데나필, 타다라필의 순으로 용리되었으며, PDA 스펙트럼의 최대흡수파장은 바데나필의 경우 216 nm, 홍데나필의 경우 233 및 282 nm, 하이드록시호모실데나필, 실데나필 및 호모실데나필의 경우 222 및 293 nm, 그리고 타다라필의 경우 284 nm이었다. 검출한계는 물질마다 차이는 있으나 신호대 잡음비 3이상에서 0.04 mg/kg이었으며 평균 회수율은 95 ~ 109% 이었고 식품시료 중 검출된 대상물질은 1.7 (홍데나필) ~ 63 (타다라필) mg/1회복용량 수준이었다.
Three different white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their abrasion wear behavior in as-cast and heat-treated conditions. The specimens were produced using a 15㎏-capacity high frequency induction furnace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into Y-block pepset molds. Three combinations of the alloying elements were selected so as to obtain the different types of carbides : 3%C-10%Cr-5%Mo-5%W(alloy No. 1: $M_7C_3$ and $M_6C$), 3%C -10%V-5%Mo-5%W(alloy No. 2: MC and $M_2C$) and 3%C-17%Cr-3%V(alloy No. 3: $M_7C_3$ only). A scratching type abrasion test was carried out in the states of as-cast(AS), homogenizing(AH), air-hardening(AHF) and tempering(AHFT). First of all, the as-cast specimens were homogenized at $950^{\circ}C$ for 5h under the vacuum atmosphere. Then, they were austenitized at $1050^{\circ}C$ for 2h and followed by air-hardening in air. The air-hardened specimens were tempered at $300^{\circ}C$ for 3h. 1 ㎏ load was applied in order to contact the specimen with abrading wheel which was wound by 120 mesh SiC paper. The wear loss of the test piece(dimension: $50{\times}50{\times}5$ mm) was measured after one cycle of wear test and this procedure was repeated up to 8 cycles. In all the specimens, the abrasion wear loss was found to decrease in the order of AH, AS, AHFT and AHF states. Abrasion wear loss was lowest in the alloy No.2 and highest in the alloy No.1 except for the as-cast and homogenized condition in which the alloy No.3 showed the highest abrasion wear loss. The lowest abrasion wear loss of the alloy No.2 could be attributed to the fact that it contained primary and eutectic MC carbides, and eutectic $M_2C$ carbide with extremely high hardness. The matrix of each specimen was fully pearlitic in the as-cast state but it was transformed to martensite, tempered martensite and austenite depending upon the type of heat-treatment. From these results, it becomes clear that MC carbide is a significant phase to improve the abrasion wear resistance.
This study was designed to examine the tissue levels of interleukin-$1{\alpha}$(IL-$1{\alpha}$), interleukin-$1{\beta}$(IL-$1{\beta}$) and tumor necrosis factor-${\alpha}$(TNF-${\alpha}$) in inflamed human dental pulps and periapical lesions, and to determine the relationship between each cytokine and pulpal and periapical pathosis. The pulps used in this experiment, were obtained in routine endodontic treatment and the periapical lesions in periapical surgery after clinical diagnoses were performed. These specimens were divided into four groups as normal pulp group(control group, n=9), acute pulpitis group(n=g), chronic pulpitis group(n= 10) and periapical lesion group(n= 18) and stored in liquid N2. For extract preparation, tissues were finely minced with a scalpel, and the fragments were incubated in $0.5m\ell$ homogenizing buffer (0.1 mol/L potassium chloride, 0.02 mol/L TRIS; pH=7.6) for two hours and grinded with glass homogenizer. Debris was removed by centrifugation and supernatants were immediately tested with enzymelinked immunosorbent assay (ELISA, R&D Co., Minneapolis, USA). Following results were obtained; 1. The concentrations of IL-$1{\alpha}$ in all experimental groups were significantly higher than in control group(p<0.05). And the concentrations of IL-$1{\alpha}$ in periapical lesion group were somewhat higher than in two pulpitis groups, but the differences among those groups were not stastically significant (p>0.05). 2. The concentrations of IL-$1{\beta}$ in all experimental groups were significantly higher than in control group (p<0.05), and all the experimental groups expressed similar concentrations. 3. The concentrations of TNF-${\alpha}$ in all experimental groups were higher than in control group but only the differences between chronic pulpitis group and control group were statistically significant(p<0.05). And the concentrations of TNF-${\alpha}$ in acute and chronic pulpit is groups were higher than in periapical lesion group but only the differences between chronic pulpitis group and periapical lesion group were statistically significant (p<0.05). 4. There was significant correlation only between IL-$1{\alpha}$ and IL-$1{\beta}$ in periapical lesion group (p<0.05).
Kim, Sun-Min;Yorozu, Kazuaki;Tachikawa, Yasuto;Shiiba, Michiharu
한국수자원학회:학술대회논문집
/
한국수자원학회 2011년도 학술발표회
/
pp.15-15
/
2011
The radar observation system in Japan is operated by two governmental groups: Japan Meteorological Agency (JMA) and the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) of Japan. The JMA radar observation network is comprised of 20 C-band radars (with a wavelength of 5.6 cm), which cover most of the Japan Islands and observe rainfall intensity and distribution. And the MLIT's radar observation system is composed of 26 C-band radars throughout Japan. The observed radar echo from each radar unit is first modified, and then sent to the National Bureau of Synthesis Process within the MLIT. Through several steps for homogenizing observation accuracy, including distance and elevation correction, synthesized rainfall intensity maps for the entire nation of Japan are generated every 5 minutes. The MLIT has recently launched a new radar observation network system designed for flash flood observation and forecasting in small river basins within urban areas. It is called the X-band multi parameter radar network, and is distinguished by its dual polarimetric wave pulses of short length (3cm). Attenuation problems resulting from the short wave length of radar echo are strengthened by polarimetric wavelengths and very dense radar networks. Currently, the network is established within four areas. Each area is observed using 3-4 X-band radars with very fine resolution in spatial (250 m) and temporal (1 minute intervals). This study provides a series of utilization procedures for the new input data into a real-time forecasting system. First of all, the accuracy of the X-band radar observation was determined by comparing its results with the rainfall intensities as observed by ground gauge stations. It was also compared with conventional C-band radar observation. The rainfall information from the new radar network was then provided to a distributed hydrologic model to simulate river discharges. The simulated river discharges were evaluated again using the observed river discharge to estimate the applicability of the new observation network in the context of operations regarding flood forecasting. It was able to determine that the newly equipped X-band polarimetric radar network shows somewhat improved observation accuracy compared to conventional C-band radar observation. However, it has a tendency to underestimate the rainfall, and the accuracy is not always superior to that of the C-band radar. The accuracy evaluation of the X-band radar observation in this study was conducted using only limited rainfall events, and more cases should be examined for developing a broader understanding of the general behavior of the X-band radar and for improving observation accuracy.
본 연구에서는 식품에 적용할 수 있는 코팅방법인 리포좀과 더블에멀션의 안정성을 연구하기 위해 기능성 아미노산인 BCAA를 함유한 리포좀과 더블에멀션을 제조하였다. 리포좀의 입자크기는 pH 7보다 pH 4에서 더 작게 나타났는데, 이는 양쪽성 이온인 BCAA가 pH 4에서는 양전하를, pH 7에서는 음전하를 띠기때문에 음전하인 레시틴과의 상호작용을 하여 그 크기에 차이가 있는 것으로 판단된다. 제타전위의 절댓값은 pH 7보다 pH 4에서 더 크게 나타나 pH 4에서 리포좀의 분산안정성이 더 높은 것으로 나타났다. 더블에멀션은 초기 입자의 크기가 $100{\mu}m$ 이내, 제타전위는 모두 절댓값이 30 mV 이상이었으나, 시간이 경과함에 따라 그 크기가 커지고, 제타전위의 절댓값은 감소하는 경향을 보였다. 리포좀과 더블에멀션의 BCAA 포집율은 모두 97% 이상이었고, 누적 방출율은 리포좀에서 더 크게 나타났으나 5일간 누적방출율은 30% 미만으로 나타났다. 따라서 리포좀과 더블에멀션은 높은 효율로 특정 기능성 물질을 안정적으로 포집한다는 특징을 가지며, 추후 계속적인 연구를 통해 이를 식품 산업에 적용할 수 있을 것으로 기대된다.
홍잠은 숙잠(熟蠶)을 수증기로 익혀서 인간이 섭취할 수 있도록 제조한 다양한 건강 증진 효과가 있는 천연 건강 식품이다. 현재 표준 제조방법은 수증기로 찐 홍잠을 보관과 판매의 편의를 위하여 급속 냉동하여 동결 건조를 진행하는 것이다. 그런데, 홍잠을 동결 건조하는 과정은 많은 시간과 비용을 필요로 하여 홍잠 제품 가격의 인상 요인으로 작용하고 있다. 본 연구에서는 홍잠을 수증기로 찐 후 바로 균질 액으로 제조하여 분무 건조하면 분말 제조 비용을 절감할 수 있음을 발견하였다. 그리고 홍잠 균질 액에 식용 단백질 분해 효소를 첨가하여 분해시킨 후, 단 1회의 분무 건조로 제품을 제조할 수 있는 방법을 개발하였다. 특히 홍잠 균질 액이나 효소 분해 홍잠 균질 액은 바로 액상이나 젤리 형태로 일반 또는 환자용 특수 의료 용도 식품에 활용이 가능함을 보여주었다. 본 연구에서는 생산비용이 감소된 홍잠의 가공 방법을 제안하며 이는 제품 생성의 단가를 낮추어 제품의 대중화와 양잠 농가의 연관산업 육성을 불러올 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.