• KSBB Journal
• /
• 제29권1호
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• 열처리공학회지
• /
• 제8권2호
• /
• pp.137-148
• /
• 1995

The nitridation kinetics of titanium powder were studied by isothermal and non-isothermal (dynamic) methods in high purity nitrogen under I atm pressure. For the comparison with nitridation, the oxidation kinetics of titanium powder were also studied in dry oxygen at I atm pressure. An automatic recording electrobalance was used to measure the weight gain as a function of time and temperature. For the reaction with nitrogen, the nitride was formed at over $700^{\circ}C$. The reaction with nitrogen followed the parabolic rate law, and the activation energy was calculated to be 31 kcal/mol in the isothermal method (above $900^{\circ}C$). The non-stoichiometric TiNx has been synthesized by the nitridation at a proper temperature and time, followed by the homogenizing treatment above $1100^{\circ}C$. In comparison with the stoichiometric $TiN_{1.0}$ and the non-stoichiometric TiNx ($TiN_{0.5}$ and $TiN_{0.65}$), the hot oxidation characteristics of the former is superior to that of the latter. However, both non-stoichiometric nitrides make little difference in the hot oxidation characteristics.

• Advances in concrete construction
• /
• 제7권4호
• /
• pp.219-229
• /
• 2019

This paper presents an experimental study on the structural performance of an innovative ultra-high performance fiber reinforced concrete (UHPFRC) deck with coarse aggregate of composite bridge under shear force. Test parameters included curing method and shear span-to-height ratio. Test results indicated that more short fine cracks developed beside the existing cracks due to the randomly dispersed fibers, resulting in re-distributing and homogenizing of the concrete stress beside cracks and allowing for the occurrence of more cracks with small spacing compared to normal strength concrete beams. Curing methods, incorporating steam curing and natural curing, did not have obvious effect on the nominal bending cracking strength and the ultimate strength of the test specimens. Shear reinforcement need not be provided for UHPFRC decks with a fiber volume fraction of 2%. UHPFRC decks showed superior load resistance ability after the appearance of cracks and excellent post-cracking deformability. Lastly, the current shear provisions were evaluated by the test results.

• Journal of Contemporary Eastern Asia
• /
• 제20권1호
• /
• pp.151-168
• /
• 2021

Misguided use, manipulation, misappropriation, disruption and mismanagement of Information deeply affects the infosphere as well as the social and moral fabric of a society. Information ethics is an attempt to bring the creation, organization, dissemination, and use of information within the ambit of ethical standards and moral codes. The diverse and inherently pluralistic nature of societies however puts forth an additional demand on us - to come up with an intercultural information ethics. An intercultural ethics which is other-centric, context sensitive and workable without being homogenizing, patronizing and colonizing. An endeavor in that direction has already been made by proponents of intercultural information ethics like: Charles M. Ess, Fay Sudweeks, Rafael Capurro, Pak-Hang Wong, Soraj Hongladarom et al. In our paper, we propose that the kind of ethical pluralism being sought in the domain of information ethics can be attained by having a reappraisal of the current methodological strategies, by casting a critical relook at the Eurocentric ethical model. This paper analyses the current framework of Intercultural Information Ethics. And in an endeavour to move towards an all-encompassing, other-centric, workable, intercultural, harmonious and compassionate model of 'Pluralistic Information Ethics', it proposes the Indian / Asian philosophical method of 'Samvāda' to the current inventory which includes methods like: 'parrhesia/free speech' and 'interpretive phronēsis.

• 근관절건강학회지
• /
• 제29권1호
• /
• pp.60-68
• /
• 2022

Purpose: This study aimed to investigate the changes in reality shock among new nurses and their influencing factors to identify turnover reduction methods. Methods: A total of 146 new nurses from 6 general hospitals participated in the survey. The survey data were collected from August 5 to November 10, 2015. Results: The mean scores for factors related to turn over were 2.75 for nurse practice environment, 2.84 (4point scale) for reality shock, and 3.08 (5point scale) for turnover intention. A significant difference in the impact of reality shock was observed depending on whether the nurses selected their work unit (F=6.24, p=.003) and whether they could take the possibility of holiday on the desired day at will (t=-2.57, p=.013). Changes in reality shock correlated with turnover intention, with the 'increased reality shock' group demonstrating an odds ratio of 2.37 (CI: 1.41~3.98) for turnover intention. Conclusion: The current findings indicate the need for lowering reality shock and turnover intention by considering nurses' work-related characteristics and improving their practice environments. To further study the changes in reality shock new nurses experienced, additional research is warranted while homogenizing the participants in terms of preceptorship duration and timing of independence.

• 동아시아식생활학회지
• /
• 제15권1호
• /
• pp.100-105
• /
• 2005

This study was conducted to investigate the extraction characteristics of the polysaccharide from Jeseng mushroom (Fomitopsis pinicola Jeseng). Yields of the polysaccharide extracted from powdered mushroom by autoclaving(120, 30 min) with water at different pH and salt concentration were 8.2～9.2% in pH 5～11, 4.7～5.5% in 1～5% salt solution, respectively. The yield by the 0.05～1.0 N KOH-extraction was ranged 3.45～13.20%, while that by HAS-extraction(homogenizing after KOH swelling) using 1～2.5 N KOH 73.6～78.4%. Content of carbohydrate, protein, lipid and ash of the crude polysaccharide extracted from fruits body and its cultured mycelium by method of water extraction, KOH extraction(0.005～1N) and HAS-extraction were ranged 86.5～92.6%, 2.3～13.1%, 0.1～4.2% and 0.1～1.7%, respectively. The polysaccharide were composed of 62.0～77.8 g/g of pentose, 138.0～187.8 g/g of hexose and 21.2～117.3 mg/g of protein. From these results, the polysaccharide extracted was supposed to be a protein-bound polysaccharide.

• 멤브레인
• /
• 제26권1호
• /
• pp.26-31
• /
• 2016

폴리카프로락톤(PCL)에 NaCl을 혼합한 용액을 블레이드법에 의하여 막형태로 제조한 후 NaCl을 추출하는 염출법을 이용하여 조직공학적으로 사용할 3차원 다공망을 갖는 멤브레인 형태의 지지체를 제조하였다. 본 연구에서는 성형된 멤브레인의 건조조건과, NaCl 입자의 크기, NaCl의 혼합량을 각각 다르게 하여 제조하였다. 별도로 제작한 고분자용액 공급장치를 이용하여 PCL/클로로포름($CHCl_3$) 용액에 NaCl 입자가 균일하게 혼합된 용액을 유리판에 분주하여 필름 어플리케이터를 사용하여 블레이드법에 의한 멤브레인을 제조하였다. 멤브레인 지지체에는 NaCl 입자에 의한 거대기공과 거대기공을 이루는 구조벽에서는 $CHCl_3$의 증발에 의한 미세기공이 함께 복합적으로 상호 연결되어 형성되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.28-28
• /
• 2010

This study realized low-temperature crystallization process of the $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) thin films without thermal damage of substrate using excimer laser annealing (ELA) and structural and electrical characteristics were investigated. The amorphous BST thin films were prepared on Pt/Ti/$SiO_2$/Si substrate by sol-gel method at $250^{\circ}C$. The ELA was carried out using KrF excimer laser which provided excitation wavelength of 248 nm. The beam homogenizing system was used in order to homogenize beam shape of Gaussian fit. The XRD and SEM were used to analyze structural characteristics and the microwave capacitance, dielectric loss and tunability of the BST films were measured by a symmetrical stripline resonator method with shorted end. Consequently, the crystallinity of BST thin films were improved after ELA process and RF tunable capacitor was demonstrated at low temperature below $300^{\circ}C$.

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.78-82
• /
• 1993

이 연구는 재래방법과 비교하여 수율이 높고 품질이 향상된 효모 자가분해들의 제조방법을 연구하는데 그 목적을 두었다. 제빵용 생 효모에 glucanase와 protease의 복합효소를 작용시킨 다음, 10,000 psi의 고압으로 균질하면 약 85.3%의 효모 세포벽이 파손되었다. 세포벽이 파손된 효모를 사용하여 자가분해 시키는데 가장 적당한 조건을 반응 표변방법(RSM)을 이용하여 조사한 결과는 pH 7.0, 온도 $30^{\circ}C$ 에탄올 4%, 소금 3%이었다. 세포벽이 파손된 효모를 위와 같은 최적조건에서 3일간 분해시켜 얻은 효모 자가분해물의 수율은 2.6배 향상되었으며, 총 아미노산의 함량도 현저히 증가(2.8배)하였다. 그리고 관능적인 품질도 재래방법으로 제조된 시료보다 고기 향미가 많고, 이미-이취가 현저하게 적어서 전체인 기호도에서도 상당히 우수한 것으로 평가되었다.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.694-701
• /
• 2015

In order to get stabilized pure retinol in skin care cosmetics, developing the three layered matrix bead capsules were studied. This study relates to make a cosmetic composition using the three layered matrix capsule that could increase the stability of the active ingredient. A primary encapsulation, vitamin A (pure retinol) of active ingredient was perfectly capsulated into water-in-oil (Water-in-Oil: W/O) emulsion vesicle using PEG-10 dimethicone copolyol emulsifier. A secondary encapsulation of multiple emulsion of the water-in-oil-in-water (W/O/W) emulsion blending W/O emulsion using sucrose distearate of surfactant was developed using homogenizing emulsifying system. Pure retinol of active ingredient was stably capsulized to inside the W/O/W-multiple emulsion in order to load the triple matrix capsulation. By coating it with a polymer matrix base, encapsulated in the triple layered type, which were developed bead encapsulation of 2~10mm uniformly size. To show beautifully appearance capsulated bead type, these finish particles in this triple matrix layer were developed as a gold, green, dark brown, silver and blue color were encapsulated in the bead types. Structural particle certification of triple matrix layer was observed through SEM analysis. Stability of pure retinol was remained stable more than 99.7% for 30 days at $42^{\circ}C$ incubating conditions compared with non-capsule. This technology was applied in different formulations such as various sizes and colors that by applying the skin care cosmetics. In the future, this technology to encapsulate an unstable active ingredient, we expect to be expanded this application in the food and drug as a time delivery system.