• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.742-748
• /
• 2004

비등점이 낮은 용매인 isopropanol에 용질농도 0.7mol/$\iota$ Zn acetate를 용해시키고 dopant로 Al chloride를 첨가하여 균일하고 안정한 sol을 합성하였다. 졸-겔법에 의한 Al-doped ZnO(AZO) 박막의 제조시 $500\~700^{\circ}C$의 범위에서 후열처리 온도를 제어하여 박막의 전기 및 광학적 특성을 조사하였다. 후열처리 온도가 증가할수록 (002) 면으로의 c-축 결정배향성은 증가하였고, 박막 표면은 균일한 나노입자의 미세구조를 형성하였다. 광 투과도는 $650^{\circ}C$ 이하의 후열처리 온도에서 $86\%$이상이었으나, $700^{\circ}C$에서는 감소하였다. 박막의 전기 비저항 값은 $650^{\circ}C$ 이하에서 열처리 온도가 증가함에 따라 73에서 22$\Omega$-cm로 감소하였으나 $700^{\circ}C$에서 580$\Omega$-cm로 급격히 증가하였다. 후열처리 온도 $700^{\circ}C$에서 AZO 박막의 전기 및 광학적 특성의 열화는 XPS 분석결과, 박막 표면에 석출된 $Al_2O_3$ 상에 기인하였다. AZO 박막의 전기 및 광학적 특성 향상을 위한 최적의 후열처리 온도는 $600^{\circ}C$였다.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.715-721
• /
• 2004

합성 수산화아파타이트(HAp)와 바인더로서 젤라틴(GEL)을 사용하여 공침법으로 조성비가 서로 다른 HAp/GEL 균질복 합체 4종을 제조하였고, 이 균질복합체를 냉간정수압법으로 성형한 후 공기중에서 여러조건으로 소결하였다. HAp/GEL composite의 소결체는 XRD 및 FT-IR로 결정성 및 구조를 조사하였고, 또한 소결시편은 만능재료시험기(UTM)로 압축강도를 측정하였으며, 파단된 소결시편의 표면은 SEM으로 관찰하였다 HAp/GEL composite는 120$0^{\circ}C$에서 3시간 소결하였을 경우 부분적인 $\alpha$, $\beta$-tricalcium phosphate로 상전이가 일어났다. 소결체의 기공률은 1.2-30.2% 범위였고, 소결시편의 압축강도는 16.2-60.1㎫ 범위의 값을 나타냄으로써 기공율에 비해 높은 강도를 나타내었다.

• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1157-1167
• /
• 2007

In an effort to interpret the characteristics of fine particle concentrations in Busan, time variations of hourly monitored concentrations $PM_{10}$ (Particulate Matter with aerodynamic Diameter ${\le}10\;{\mu}m$) in Busan are analyzed for the period from 2000 to 2005. The characteristics of aerosol second generation formation process is also interpreted qualitatively, by using the statistical analysis of the meteorological variables including temperature, wind speed, and relative humidity. The result shows some significant annual, seasonal, weekly and diurnal variations of $PM_{10}$ concentrations. In particular, seasonal(i.e., spring) variations are governed by frequency of yellow sand events even for the non-yellow sand cases where yellow-sand days are eliminated in our analysis. However, in seasonal variation, summer season predominate lower $PM_{10}$ concentrations due to the frequent precipitation, and weekly and diurnal variations are both found to be reflecting the emission rate from traffic amount. Correlation coefficients between $PM_{10}$ concentration and meterological variables for non-yellow sand days show overall negative correlation with visibility, wind speed, cloud amounts, and relative humidity. However for non-precipitation days, during non-yellow sand period positive correlation are found clearly with relative humidity, suggesting the importance of secondary aerosol formation in Busan that can be achieved by both homogeneous aerosol formation and heterogeneous transformations resulting from hygroscopic aerosol characteristics.

• 공업화학
• /
• 제5권4호
• /
• pp.597-608
• /
• 1994

$(NH_4)_2SO_4$와 저품위 bauxite의 황산화 반응에 따라 얻어진 ammonium aluminium sulfate로부터 수열균일침전을 통해 무정형 alumina gel수화물 및 결정형 boehmite를 합성하고 이로 부터 고순도 $Al_2O_3$를 제조하는 새로운 공정 개발을 시도하였다. 이 공정은 ammonium aluminium sulfate용액 중의 Fe 성분을 제거하기 위한 용매추출공정과 정제된 ammonium aluminium sulfate용액으로부터 균일침전에 의한 Al 함유 침전물의 생성에 관한 것으로 이루어져 있다. 추출제 Alamine 336에 의한 적절한 용매추출조건은 shaking time 4분, 수상에 대한 유기상의 비 0.25였다. Urea를 이용한 수열균일 침전반응은 Al 함유용액 중의 Al에 대한 urea의 당량비 6.0의 조건에서 반응온도 $100^{\circ}C$ 이하에서는 무정형 alumina gel 수화물, $120^{\circ}C$ 이상 $150^{\circ}C$ 이하에서는 pseudo boehmite 그리고 $150^{\circ}C$ 이상에서는 결정형 boehmite가 합성되었다. 이 합성된 무정형 alumina gel 수화물은 소성시간 2시간, 소성온도 $1000^{\circ}C$ 이상에서 그리고 결정형 boehnite는 소성시간 2시간, 소성온도 $1250^{\circ}C$ 이상에서 ${\alpha}-Al_2O_3$로 전이되며 얻어진 ${\alpha}-Al_2O_3$의 순도는 99.97%의 고순도였다.

• Advances in nano research
• /
• 제1권3호
• /
• pp.159-169
• /
• 2013

A preparation method for gadolinium compound (GdC) nanoparticles coated with silica ($GdC/SiO_2$) is proposed. GdC nanoparticles were prepared with a homogeneous precipitation method at $80^{\circ}C$ using $1.0{\times}10^{-3}$ M $Gd(NO_3)_3$, 0.5 M urea and $0-3.0{\times}10^{-4}$ M ethylenediarinnetetraacetic acid disodium salt dihydrate (ETDA) in water. As a result of preparation at various EDTA concentrations, GdC nanoparticles with a size as small as $40.5{\pm}6.2$ nm, which were colloidally stable, were prepared at an EDTA concentration of $2.0{\times}10^{-4}$ M. Silica-coating of the GdC nanoparticles was performed by a St$\ddot{o}$ber method at $35^{\circ}C$ using $1.0-10.0{\times}10^{-3}$ M tetraethylorthosilicate (TEOS), 11 M $H_2O$ and $1.5{\times}10^{-3}$ M NaOH in ethanol in the presence of $1.0{\times}10^{-3}$ M GdC nanoparticles. Performance of preparation at various TEOS concentrations resulted in production of $GdC/SiO_2$ particles with an average size of $106.1{\pm}11.2$ nm at a TEOS concentration of $5.0{\times}10^{-3}$ M. The gadolinium (Gd) concentration of $1.0{\times}10^{-3}$ M in the as-prepared $GdC/SiO_2$ particle colloid solution was increased up to a Gd concentration of 0.2 M by concentrating with centrifugation. The core-shell structure of $GdC/SiO_2$ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated $GdC/SiO_2$ colloid solution showed images of X-ray and magnetic resonance with contrast as high as commercial Gd complex contrast agents.

• 공업화학
• /
• 제21권2호
• /
• pp.211-216
• /
• 2010

우레아와 포름산을 이용한 균일침전법으로 $(NH_4)_{0.3}V_2O_5$ 및 $V_2O_5$ 나노소재를 합성한 후 TGA, SEM, FT-IR, XRD, 선형 전압전류법 등을 이용하여 물성과 전기화학적 특성을 조사하였다. 평균 층간 거리는 우레아 첨가 유무에 따라 $10.7{\AA}$, $14.2{\AA}$로 각각 나타났다. 또한 표면구조는 합성 시 우레아가 첨가된 소재는 나노로드, 포름산만 첨가된 시료는 나노쉬트 모양의 단위체가 형성되었다. $95^{\circ}C$에서 우레아를 첨가하여 제조한 $(NH_4)_{0.3}V_2O_5$ 나노소재의 전지용량은 평균 280 mAh/g 이상이었다.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.866-877
• /
• 2018

Cheese emulsion is an intermediate product for the production of cheese powder and needs to be stable, homogeneous and pumpable characteristics to convey to the spray drier. This study was conducted to evaluate the effects of fat reduction and emulsifying salt (ES) amount in cheese emulsion systems on the physicochemical characteristics. Reduced-fat (RF) and full-fat (FF) white-brined cheese emulsions were produced with different dry matters (DM; 15%-25% excluding ES) and ES concentrations (0%-3% based on cheese weight). Stable cheese emulsion was obtained at lower DM in RF cheese emulsion than that of FF cheese emulsion. Reduction in the amount of ES resulted in instability of both emulsions. Apparent viscosity with pseudoplastic flow behavior significantly increased with the decrease of fat content in stable cheese emulsions. Microstructure of emulsions appeared to be related to the fat content, stability and degree of emulsification. Reduction of fat content caused to get less lightness and more greenness in color, whereas yellowness was significantly decreased by increase in the amount of ES. In conclusion, fat reduction resulted in higher viscosities of cheese emulsion due to inducing the increment of protein, and the addition amount of ES considered as very important factor to produce stable cheese emulsion without protein precipitation or cream separation. Therefore, for preparation of RF cheese emulsion using a variety of white-brined cheese, lower amounts of DM would be suggested in this study to obtain homogenous droplets in the atomizing process of spray drying.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.535-539
• /
• 2002

이 연구는 저온균일침전법으로 제조한 루타일 상의 TiO$_2$ 나노분말을 이용하여 AgNO$_3$ 수용액 중에서 광반응 조건에 따른 Ag 이온의 광흡차 특성을 고찰하였다. 자연광을 조사하였을 경우 흡척되는 Ag의 양이 9.32ppm이며 Ag 이온의 환원 속도는 느리지만 루타일 TiO$_2$ 나노분말이 자연광에서도 광촉매 반응을 일으킨다는 것을 확인하였다. 암반응 하에서도 TiO$_2$ 나노분말 자체의 밤송이 형태 때문에 Ag흡착 반응이 진행되었으며, UV를 적용할 때에는 120분 이내에 Ag 이온이 전부 흡착되었다. 광촉매 반응이 더 중요시 됨을 알수 있었다. 흡착 반응속도상수와 흡착 평형속도상수를 계산한 결과, 각각 0.0004g/min와 1494.20(120 $m^2$/g)를 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.37-41
• /
• 2001

Photo catalytic characteristics of nano-sized TiO$_2$ powder with rutile phase produced using homogeneous precipitation process at low temperatures (HPPLT) were compared with those of commercial P-25 powder by Degussa Co. The TiO$_2$ powder by HPPLT showed very higher photoactivity in the removal rate, showing lower pH values in the solution, than the P-25 powder when eliminating metal ions such as Pb and Cu from aqueous metal-EDTA solutions. This can be inferred the more rapid photo-oxidation or -reduction of metal ions from the aqueous solution, together with relatively higher efficiencies in the use of electron-hole pair formed on the surface of TiO$_2$ particle, under UV light irradiation. Also, in the view of the TiO$_2$ particle morphology, compared to the well-dispersed spherical P-25 particle, the agglomerated TiO$_2$ particle by HPPL T consists of acicular typed primary particle with the thickness ranged of 3∼7 nm, which would be more effective to the photocatalytic reactions without electron-hole recombination on the surface of the TiO$_2$ particle under the UV light irradiation. It is, therefore, thought that the higher photo activity of the rutile TiO$_2$ powder by HPPLT in the aqueous solutions resulted from having its higher specific surface area as well as acicular shape primary particle with very thin thickness.

• 대기
• /
• 제25권2호
• /
• pp.261-270
• /
• 2015

Characteristics of snowfall and snow crystal habits have been investigated in the campaign of Experiment on Snow Storms At Yeongdong (ESSAY) using radiosonde soundings, Global Navigation Satellite System (GNSS), and a digital camera with a magnifier for taking a photograph of snowfall crystals. The analysis period is 6 to 14 February 2014, when the accumulated snowfall amount is 192.8 cm with the longest snowfall duration of 9 days. The synoptic situations are similar to those of the previous studies such as the Low pressure system passing by the far South of the Korean peninsula along with the Siberian High extending to northern Japan, which eventually results in the northeasterly or easterly flows and the long-lasting snowfall episodes in the Yeongdong region. In general, the ice clouds tended to exist below around 2~3 km with the consistent easterly flows, and the winds shifted to northerly~northwesterly above the clouds layer. The snow crystal habits observed in the ESSAY campaign were mainly dendrite, consisting of 70% of the entire habits. The rimed habits were frequently captured when two-layered clouds were observed, probably through the process of freezing of super-cooled droplets on the ice particles. The homogeneous habit such as dendrite was shown in case of shallow clouds with its thickness of below 500 m whereas various habits were captured such as dendrites, rimed dendrites, aggregates of dendrites, plates, rimed plates, etc in the thick cloud with its thickness greater than 1.5 km. The dendrites appeared to be dominant in the condition of cloud top temperature specifically ranging $-12{\sim}-16^{\circ}C$. However, the association of snow crystal habits with temperature and super-saturation in the cloud could not be examined in the current study. Better understandings of characteristics of snow crystal habits would contribute to preventing breakdown accidents such as a greenhouse destruction and collapse of a temporary building due to heavy snowfall, and traffic accidents due to snow-slippery road condition, providing a higher-level weather information of snow quality for skiers participating in the winter sports, and estimating more accurate snowfall amount, location, and duration with the fallspeed of solid precipitation.