• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.260-265
• /
• 1998

Spherical, ${\mu}m$-sized particles of barium titanyl oxalate were prepared by thermal decomposition of dimethyl oxalate in acidic barium and titanium solutions. Precipitation was carried out in the presence of several supporting anions. Spherical particles having a specific type of particle size distribution. i.e., unimodal or bimodal distribution, with mean size in the range of $0.2{\sim}3{\mu}m$, were formed depending on the supporting anions, oxalate ion generation rate and aging time. Particles of barium titanyl oxalate settled on the bottom of the beaker at the aging time of 120 min grew to the critical monosize of about $1.5{\sim}3{\mu}m$. XRD spectra and chemical analyses of barium titanate showed that barium titanyl oxalate with high qualities could be synthesized by choosing chloride ion as a supporting anion and increasing the reaction temperatures.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.785-789
• /
• 2005

$TiO_2$ powders with rutile and brookite phases were synthesized through homogeneous precipitation of the aqueous $TiOCl_2$ solution, prepared from $TiCl_4$ and HCl solution, and their properties were characterized. Based on the analytical results appropriate molar ratios of ${Cl^-}_{total}:Ti^{+4}$ in precipitating solution for synthesis of pure rutile phase and a mixture of rutile and brookite phases were proposed. The volumetric proportion of brookite increased with increasing HCl concentration under a typical condition obtaining mixed phase of rutile and brookite. The brookite phase in the mixture was transformed to anatase phase by heat treatment at about $800^{\circ}C{\sim}850^{\circ}C$, and finally converted to rutile phase at $1000^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.226-231
• /
• 2002

The present study discusses the results of the controlled precipitation of HgTe nanocrystals in a PbTe semiconductor matrix and demonstrates its effectiveness in producing well-organized and crystallographically aligned semiconductor nanocrystals. Following the similar procedure used in metallic alloys, the semiconductor alloys are treated at 600$^{\circ}C$ for 48 hours, quenched and aged up to 500 hours at 300$^{\circ}C$ and 450$^{\circ}C$ to induce homogeneous nucleation and growth of HgTe nanocrystalline precipitates. Examination of the resulting precipitates using transmission electron microscopy (TEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the {100} habit planes making a crystallographic relation of {100}$\sub$HgTe///{100}$\sub$PbTe/ and [100]$\sub$HgTe///[100]$\sub$PbTe/. It is also found that the nato-disc undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for the preparation of the desirable quantum-dot nanostructures.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.947-954
• /
• 2002

HCl concentration and reaction time are the decisive factors in determining the structure of precipitates in the process of synthesis of $TiO_2$ particles from aqueous $TiOCl_2$ solution by precipitation and the volumetric proportion of brookite phase in $TiO_2$ particles can be controlled by these two factors. As reaction rate increases with increase of reaction temperature, the reaction time, at which maximum volumetric proportion of brookite phase in $TiO_2$ particles was obtained, was reduced. The brookite was transformed directly to rutile phase with only increase of reaction time. And precipitation was delayed with increase of HCl concentration because the amount of $H_2$O, which is necessary source of oxygen for conversion of $Ti^{+4}$ to $TiO_2$, was relatively reduced with increase of that. Brookite in the mixture phase powder was finally transformed to rutile phase via anatase through heat-treatment.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.595-604
• /
• 2005

Precipitation simulation for making the data size larger is an important task for hydrologic analysis. The simulation can be divided into two major categories which are the parametric and nonparametric methods. Also, precipitation simulation depends on time intervals such as daily or hourly rainfall simulations. So far, Markov model is the most favored method for daily precipitation simulation. However, most models are consist of state transition probability by using the homogeneous Markov chain model. In order to make a state vector, the small size of data brings difficulties, and also the assumption of homogeneousness among the state vector in a month causes problems. In other words, the process of daily precipitation mechanism is nonstationary. In order to overcome these problems, this paper focused on the nonparametric method by using uni-variate and multi-variate when simulating a precipitation instead of currently used parametric method.

• Journal of Korea Water Resources Association
• /
• v.51 no.5
• /
• pp.383-393
• /
• 2018

The regional frequency analysis is the method which uses not only sample of target station but also sample of neighborhood stations in which are classified as hydrological homogeneous regions. Consequently, identification of homogeneous regions is a very important process in regional frequency analysis. In this study, homogeneous regions for regional frequency analysis of precipitation were identified by the self-organizing map (SOM) which is one of the artificial neural network. Geographical information and hourly rainfall data set were used in order to perform the SOM. Quantization error and topographic error were computed for identifying the optimal SOM map. As a result, the SOM model organized by $7{\times}6$ array with 42 nodes was selected and the selected stations were classified into 6 clusters for rainfall regional frequency analysis. According to results of the heterogeneity measure, all 6 clusters were identified as homogeneous regions and showed more homogeneous regions compared with the result of previous study.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.252-263
• /
• 2008

This study was conducted to derive the optimal regionalization of the precipitation data which can be classified on the basis of climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. A total of 65 rain gauges were used to regional analysis of precipitation. Annual maximum series for the consecutive durations of 1, 3, 6, 12, 24, 36, 48 and 72hr were used for various statistical analyses. K-means clustering mettled is used to identify homogeneous regions all over the regions. Five homogeneous regions for the precipitation were classified by the K-means clustering. Using the L-moment ratios and Kolmogorov-Smirnov test, the underlying regional probability distribution was identified to be the generalized extreme value (GEV) distribution among applied distributions. The regional and at-site parameters of the generalized extreme value distribution were estimated by the linear combination of the probability weighted moments, L-moment. The regional and at-site analysis for the design rainfall were tested by Monte Carlo simulation. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE were computed and compared with those resulting from at-site Monte Carlo simulation. All show that the regional analysis procedure can substantially reduce the RRMSE, RBIAS and RR in RRMSE in the prediction of design rainfall. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.561-566
• /
• 2005

For the homogeneous dispersion of $ZrO_2$ particles in $Al_2O_3/ZrO_2$ceramics, Zr-precusors were mixed with oxide $Al_2O_3$powders by chemical routes such as partial precipitation or partial polymerization of Zr-nitrate solutions. In case of the mechanical mixing of ultrafine $Al_2O_3$ and $ZrO_2$ oxide powders, relatively homogeneous dispersion was difficult to achieve so that the particle size and distributions of $ZrO_2$ were relatively inhomogeneous after sintering at high temperature. But when the Zr-Y-hydroxide were co-precipitated to ultrafine $Al_2O_3$ oxide powders followed by calcinations, homogeneous dispersion of nano-sized $ZrO_2$ particles in $Al_2O_3/ZrO_2$ composite ceramics were obtained. But because of the coalescence of dispersed $ZrO_2$ particles, dispersed $ZrO_2$ was grown up to more than 0.2${mu}m$ (200 nm) when sintered at the temperature of higher than $1500^{\circ}C$ But when the sintering temperature was kept to lower than $1400^{\circ}C$ by using nano-sized $\alpha-alumina$, the particle size of dispersed $ZrO_2$ could be sustained below 0.1 ${\mu}m$. But the coalescence of dispersed $ZrO_2$ between $Al_2O_3$ particles could not be avoided so that the mechanical properties were not enhanced contrary to the expectations. So Zr-polyester precursors were precipitated and coated to the surface of ultrafine $\alpha-alumina$ powders by the polymerization of Ethylene Glycol with Citric Acid and Zirconium Nitrate. By this dispersion much more uniform dispersion of $ZrO_2$ was achieved at $1450\~1600^{\circ}C$ of sintering temperature ranges. And due to especially discrete dispersion of $ZrO_2$ between $Al_2O_3$ particles, their mechanical strength was more enhanced than mechanical mixing or hydroxide precipitation methods.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.60-61
• /
• 1996

Polyanion-polycation complexes had been known for a long time on an empirical basis fromthe mutual precipitation of proteins, before Kossel at the end of the previous century recognized the electrostatic nature of the interaction between oppositely charged polyions. The formation of polyelectmlyte complexes is essentially a result of the electrostatic nature of the interaction between oppositely charged polyions. This interaction in the macroscopic homogeneous system the phase transition by polysalt precipitation as well as the chemical and physical structure of polyelectrolyte complex membranes have been intensively investigated from the themodynamical and kinetical point of view.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.318-322
• /
• 2004

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation. For the estimation of the regional design rain(all, classification of the climatologically and geographically homogeneous regions should be preceded preferentially The optimal regionalization of the precipitation data were classified by the above mentioned conditions for all over the regions except Jeju and Ulleung islands in Korea. Relative root mean square error(RRMSE), relative bias(RBIAS) and relative reduction(RR) in RRMSE for the design rainfall were computed and compared between the regional and at-site frequency analysis. Consequently, optimal design rainfalls following the classified regions and consecutive durations were derived by the regional frequency analysis using GEV distribution which was identified to be more optimal one than the other applied distributions.