• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.89-100
• /
• 1997

This paper investigated a new type of low voltage threshold switch (LVTS). As distinguished from the many other types of electronic threshold switches, the LvTS is ; voltage controlled, occurs at low voltages ($V_{2}$ $O_{5}$lV devices. The average low threshold voltage < $V_{LVT}$>=218 mV (standard deviation =24mV~kT/q, where T=300K), and was independent of the device area (x100) and amorphous oxide occurred in an ~22.angs. thick interphase of the V/amorphous- $V_{2}$ $O_{5}$ contacts. At $V_{LVT}$ there was a transition from an initially low conductance (OFF) state into a succession of quantized states of higher conductance (ON). The OFF state was spatically homogeneous and dominated by tunneling into the interphase. The ON state conductances were consistent with the quantized conductances of ballistic transport through a one dimensional, quantum point contact. The temeprature dependence of $V_{LVT}$, and fit of the material parameters (dielectric function, barrier energy, conductivity) to the data, showed that transport in the OFF and ON states occurred in an interphase with the characteristics of, respectively, semiconducting and metallic V $O_{2}$. The experimental results suggest that the LVTS is likely to be observed in interphases produced by a critical event associated with an inelastic transfer of energy.rgy.y.rgy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.9-16
• /
• 2011

Most of the current mobility management protocols such as MIPv4/6 and its variants standardized by the IETF do not support global seamless handover. This is because they require comprehensive changes of the existing network infrastructure. In this article, we propose a simple mobility management protocol (SMMP) which can support global seamless handover between homogeneous or heterogeneous wireless networks. The idea is that the SMMP employs separate location management function as done in SIP to support global user and service mobility. In addition, the bidirectional tunnels are dynamically constructed to support seamless IP mobility by extending the IEEE 802.21 MIH standards. The detailed architecture and functions of the SMMP have been designed. Finally, the simulation results, using NS-2, show that the proposed SMMP outperforms the existing MIPv6 and HMIPv6 in terms of handover latency, packet loss, pear signal noise ratio (PSNR).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.463-469
• /
• 2016

In this study, a virtual specimen with a linear continuous gradient of void ratio (FGM: Functional Graded Material) is constructed using low-order probability functions of two real cement paste specimens. Two real specimens with difference void ratios are taken from X-ray CT to construct the virtual specimen. A virtual specimen with a gradient void distribution, whose average void ratio is between void ratios of two homogeneous real specimens, is constructed using a stochastic optimization approach. The void ratio distribution is assumed to be linear, and continuously varies in the vertical direction. In this study, a gradient term of void ratio is incorporated into the objective function as well as low-order probability functions from the previous research. To confirm the effect of gradient void distribution on the material response, air permeability is evaluated using finite element analysis. The analysis results are compared with experimental results, and confirm the effect of gradient void distribution on permeability.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.133-137
• /
• 2005

We fabricated the Au/Ni template for YBCO coated conductors and evaluated texture formation and the microstructural evolution. The cube textured Ni substrate was fabricated by rolling and recrystallization annealing, and subsequently Au layer formed on the substrate by electroless-plating method. The texture was evaluated by pole-figure with x-ray goniometer with orientation distribution function (ODF) analysis. The surface roughness and grain boundary morphology of template were characterized by atomic force microscopy (AFM) We observed that Au layer deposited epitaxially on Ni substrate and formed a strong cube texture when plating time was optimized. The full-width at half-maximum (FWHM) was $8.4^{\circ}$ for out-of-plane and $9.98^{\circ}$ for in-plane texture for plating time of 30 min. Microstructural observation showed that the Au layer was homogeneous and dense without formation of crack/microcrack. In addition, we observed that root-mean-square (RMS) and depth of grain boundary were 14.6 nm and 160 $\AA$ for the Au layer, respectively, while those were 27.0 nm and 800 $\AA$ for the Ni substrate, indicating that the electoless-plated Au layer had relatively smooth surface and effectively mollified grain groove.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.145-149
• /
• 2014

A hydroxyapatite microsphere was prepared using a spray-drying method. The change in the shape as a function of the slurry concentration and the change in the degree of shrinkage according to the heat-treatment temperatures were observed. To obtain biomaterials with improved bio-stability, $CaHPO_4{\cdot}2H_2O$ and $Ca(OH)_2$ were mixed at a ratio of 6 : 4 and then ball-milled to synthesize hydroxyapatite. The hydroxyapatite microsphere was prepared using 30 wt% ~ 80 wt% hydroxyapatite slurry by a spray-drying method. For concentrations lower than 50 wt% or higher than 80 wt%, doughnut-shaped microspheres were produced. However, perfect microspheres were produced when using slurry concentrations of 50 wt% ~ 70 wt%. A dense microstructure was observed after a heat treatment at temperatures higher than $1100^{\circ}C$ and the size was reduced by 24.3% at these temperatures.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.6
• /
• pp.1245-1255
• /
• 2017

The online learning is a process of obtaining the solution for a given objective function where the data is accumulated in real time or in batch units. The stochastic gradient descent method is one of the most widely used for the online learning. This method is not only easy to implement, but also has good properties of the solution under the assumption that the generating model of data is homogeneous. However, the stochastic gradient method could severely mislead the online-learning when the homogeneity is actually violated. We assume that there are two heterogeneous generating models in the observation, and propose the a new stochastic gradient method that mitigate the problem of the heterogeneous models. We introduce a robust mini-batch optimization method using statistical tests and investigate the convergence radius of the solution in the proposed method. Moreover, the theoretical results are confirmed by the numerical simulations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.325-330
• /
• 2018

This paper, following the shape parameters of the minimax distribution, describes the special form of the beta distribution, the Minimax distribution, as a function of the shape parameters for the software reliability model based on the non-homogeneous Poisson process. Characteristics and usefulness were discussed. As a result, the case of the shape parameter 1 of Minimax distribution than less than and greate in mean squared error is the smallest, in determination coefficient, appears to be high, the shape parameter 1 of Minimax distribution regard as an efficient model. The estimated determination coefficient of the proposed model is estimated to be more than 95%, which is a useful model in the field of software reliability. Through this study, software design and users can identify the software failure characteristics using mean square error, decision coefficient, and confidence interval can be used as a basic guideline.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1007-1015
• /
• 2013

A stochastic probability model based on the non-homogeneous Poisson process is represented that can correctly analyze the time-dependent linear and nonlinear behaviors of total damage over the occurrence process of loads. Introducing several types of damage intensity functions, the probability of failure and the total damage with respect to mean time to failure has been investigated in detail. Taking particularly the limit state to be the random variables followed with a distribution function, the uncertainty of that would be taken into consideration in this paper. In addition, the stochastic probability model has been straightforwardly applied to the rubble-mound breakwaters with the definition of damage level about the erosion of armor units. The probability of failure and the nonlinear total damage with respect to mean time to failure has been analyzed with the damage intensity functions for armor units estimated by fitting the expected total damage to the experimental datum. Based on the present results from the stochastic probability model, the preventive management for the armor units of the rubble-mound breakwaters would be suggested to make a decision on the repairing time and the minimum amounts repaired quantitatively.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.489-496
• /
• 2000

This study was conducted in order to find an ideal working fluid kind and a proper filling amount in the heat pipe as well as an inclined angle of heat pipe when they are placed to recover exhaust gas heat in the hot air heater. Followings are the findings of this research. 1. Of the four different working fluids-gasoline kerosene distilled water and acetone-acetone filled heat pipe showed the best performance giving out more homogeneous temperature profile on the radiating part than the kerosene and gasoline heat pipe an carrying out heat transmitting function better than the distilled water heat pipe by 10~2$0^{\circ}C$ higher on the radiating part. Acetone would be a good choice for recycling of exhaust gas heat in the hot air heater. 2. Of the filling amount of working fluid inside the heat pipes dry-out situations possible caused by insufficient filling were found in the filling amount of 5, 7.5 and 10% heat pipes as heat supply rate increases gradually in the range of 50 to 15kJ/sec. but no dry-out and stabilized heat transmitting performance occurred in the heat pipes of 12.5 and 15% filling at the same heat supply rate. It recommends that filling amount shall exceed 12.5% at least with the working fluids of this experiment. 3. The test revealed that the heat transmitting performance of heat pipe was more affected by filling amount rather than inclined angle.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.229-240
• /
• 2020

In the present work, the main features of primary vortices and the vorticity concentrations downstream of vortex bursting in crossflow plane of a delta wing with a sweep angle of Λ=70° were investigated under the variation of the sideslip angles, β. For the pre-review of flow structures, dye visualization was conducted. In connection with a qualitative observation, a quantitative flow analysis was performed by employing Particle Image Velocimetry (PIV). The sideslip angles, β were varied with four different angles, such as 0°, 4°, 12°, and 20° while angles of attack, α were altered between 25° and 35°. This study mainly focused on the instantaneous flow features sequentially located at different crossflow planes such as x/C=0.6, 0.8 and 1.0. As a summary, time-averaged and instantaneous non-uniformity of turbulent flow structures are altered considerably resulting in non-homogeneous delta wing surface loading as a function of the sideslip angle. The vortex bursting location on the windward side of the delta wing advances towards the leading-edge point of the delta wing. The trajectory of the primary vortex on the leeward side slides towards sideways along the span of the delta wing. Besides, the uniformity of the lift coefficient, C_L over the delta wing plane was severely affected due to unbalanced distribution of buffet loading over the same plane caused by the variation of the sideslip angle, β. Consequently, dissimilarities of the leading-edge vortices result in deterioration of the mean value of the lift coefficient, C_L.