• Title/Summary/Keyword: Holes

Search Result 2,727, Processing Time 0.029 seconds

Discharging Performance in Length of Hard Labyrinth and Pressure of Cylinder Type Drip Irrigation Hose (원통형 점적기의 압력과 경질미로의 길이에 따른 토출 특성)

  • Kim, Jin Hyun;Woo, Man Ho;Kim, Dong Eok
    • Journal of agriculture & life science
    • /
    • v.52 no.6
    • /
    • pp.103-109
    • /
    • 2018
  • The performance of drip irrigation devices depends on flow uniformity related to the function of pressure compensation. The flow uniformity can be secured when the internal fluid pressures at the positions of the flow holes are maintained uniformly. The pressure compensation effect of the drip irrigation devices can be optimized with the combination of soft silicon and labyrinth structures. However, for a drip irrigation devices composed of only hard labyrinth structures, the flow rate is changed largely with the length and the internal geometry of the labyrinth structure. Although a drip irrigation devices with only hard labyrinth structures can be fabricated simply, the changes of flow rates with internal fluid pressures are much larger than those of the drip irrigation devices with soft silicon. Because the drip irrigation devices with only labyrinth structures can be utilized widely through the optimization of the fluid pressure, the length of the structures, and the cross-sectional area of them, the study on the optimization can play an important role for enhancing the performance of the drip irrigation devices. In this study, experimental and numerical studies for investigating the performance of the drip irrigation devices had been conducted. In the experiments and numerical calculations(CFD), the variable parameters were the lengths of the labyrinth structures(#1~#8) and the fluid pressures(0.5~3.0 bar).

Synthesis of Polyaniline/WO3 Anode for Lithium Ion Capacitor and Its Electrochemical Characteristics under Light Irradiation (리튬이온커패시터용 Polyaniline/WO3 음극 제조 및 이의 광 조사에 따른 전기화학적 특성 변화)

  • Park, Yiseul
    • Korean Chemical Engineering Research
    • /
    • v.56 no.6
    • /
    • pp.884-889
    • /
    • 2018
  • In this study, polyaniline $(PANI)/WO_3$ electrode was prepared as an anode of a lithium ion capacitor, and its electrochemical characteristics were measured and analyzed. When PANI was electrochemically deposited on the surface of $WO_3$ electrode, the capacity of $PANI/WO_3$ was improved with increase of the deposited amounts of PANI. Furthermore, the effect of light irradiation on capacity and coulombic efficiency was examined by irradiating sunlight during charging and discharging. When the light was irradiated to the $WO_3$ electrode and the $PANI/WO_3$ electrode, those capacities and coulombic efficiencies were increased compared to that measured under the dark condition. It is attributed to the photocatalytic property of $WO_3$ that can generate photoelectrons by light irradiation. In $PANI/WO_3$ electrode, PANI also can be excited under the light irradiation with affecting the electrochemical property of electrode. The photoelectrons improve the capacity by participating in the intercalation of $Li^+$ ions, and also improve the coulombic efficiency by facilitating electrons' transport. Under the dark condition, the capacity of $PANI/WO_3$ was gradually reduced with increase of cycles due to a poor stability of PANI. However, the stability of PANI was significantly improved by the light irradiation, which is attributed to the oxidation-reduction reaction originated from the photogenerated electrons and holes in $PANI/WO_3$.

Material Properties and Conservation of Imjin Jangcho (Drafts of Imjin War Reports of Admiral Yi Sun-sin) of the 76th National Treasure of South Korea (국보 제76호 임진장초(壬辰狀草)의 지질분석과 보존처리)

  • Jeong, Seon-hwa;Shin, Hyo-young;Hong, Sun-cheon;Song, Jeong-won
    • Korean Journal of Heritage: History & Science
    • /
    • v.47 no.4
    • /
    • pp.106-119
    • /
    • 2014
  • The $76^{th}$ National Treasure is consisted of seven volumes of Nanjung Ilgi (War Diary of Admiral Yi Sun-sin; each titled by the author based on the zodiac name of the year covered, i.e. Imjin Ilgi, Gyesa Ilgi, Gabo Ilgi, Byeongsin Ilgi, Jeongyu Ilgi, Sok Jeongyu Ilgi, Musul Ilgi), Seogancheob (Letters of Admiral Yi) and Imjin Jangcho (Drafts of Imjin War Reports of Admiral Yi). These are currently in the custody of Hyeonchungsa shrine, the state-managed memorial shrine of Admiral Yi, and has been added to UNESCO's Memory of the World Register in June 2013 in the appreciation of its historical and academic importance as a commander's hand-written battlefield accounts during Japanese invasions of Korea. Imjin Jangcho, among these nine volumes, is a record of battles, including observations on the enemy fleets, suggestions on naval matters, battle expenditure, and methods of battle preparation, transcribed by someone else according to Admiral Yi's instructions. It is Admiral Yi's honest detailobservations on the war situation during Japanese invasions of Korea from 1592 as a Naval Commander of Left Jeolla Province, till 1594 (Year 27 of King Seonjo's reign) as a Commander-in-Chief of the Naval Forces of the South. It is a draft of the war report to be submitted to the King in a single volume as a folio (each sheet folded once to produce one leaf) bound in a side-stitched binding with five holes and inner binding of twisted paper. This study explores the condition and the treatment performed on Imjin Jangcho which could have an implication for the conservation of cultural assets on paper of late Joseon Dynasty.

Influence on the Movement of Fish by the Installation of Structures in Mountain Streams: Focused on Chinese Minnow (산지계류에 설치된 계상구조물이 어류의 이동에 미치는 영향: 버들치를 중심으로)

  • Ma, Ho-Seop;Park, Jae-Hyeon
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.2
    • /
    • pp.224-232
    • /
    • 2019
  • The movement of fish to the upper and the lower parts of a mountain stream was investigated based on the installation of specific types of structures within the stream. The results indicated that as the flow rate increases after a rain, the height of the drop in an open-type structure, such as a concrete box, is decreased so that the floating fishes, such as the Chinese minnow fish, move relatively easily from the upper to the lower parts and from the lower to the upper parts of the stream. In contrast, the fishes released from an upper point of a wall-type structure with <1 m, such as rocks drop works and stone masonry for stream-grade stabilization, were trapped in the lower part of the stream and, even after the rainy season, it was difficult for the fish to move from the lower to the upper parts of the stream. In particular, the barrier-type structures ${\geq}3m$ limit the movement of fish, even when there are few drainage holes at the lower end of the dam, and there is no space for the fishes to communicate with each other, even when the flow rate is high; therefore, although the fish are active, they are restricted to move according to the type and characteristics of the structures. When installing structures in a mountain stream, the height of the structure must be low enough to allow the fish to communicate with each other or an open-type structure must be installed. The fish habitat and water conditions within the stream must be considered when designing the type and height of the in-stream structures.

A Material Characteristic Study on the Sword with an Undecorated Ring Pommel of the Ancient Tombs of Jeongchon, Bogam-Ri, Naju (나주 복암리 정촌고분 출토 소환두도의 재료학적 특성)

  • Lee, Hyeyoun
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.3
    • /
    • pp.160-171
    • /
    • 2019
  • The sword with a ring pommel, which was excavated from the first stone chamber of the ancient tombs of Jeongchon Village in Naju, is a sword with a pentagon undecorated ring pommel consisting of a mother sword and two child swords. The sword with an undecorated ring pommel of Jeongchon comprises a ring pommel, a hilt, a knife, and a knife end decoration. This sword was coated with lacquer. The ring pommel is an iron frame covered with silver plate; however the silver tarnished into a light purple due to silver chloride corrosion, and iron corrosion originated from the inside is visible on the surface. Silver chloride corrosion is produced when silver objects are exposed to water, dissolved salts, and dissolved chloride ions when in a buried state. It changes objects into powder, making it difficult to preserve original shapes. The other silver artifacts found in the Jeongchon ancient tombs show similar signs of corrosion. The results of X-ray irradiation and a CT analysis showed that the sword had a ring at the end of the handle, a T-shaped hilt, and was probably connected to the handle end of a knife. If the shape of the mother sword can be inferred from the child swords, the mother sword had a ring pommel, decorations of the handle, covered with silver plate, and a gold ring and a silver line wound around the handle. It is assumed that the ring pommel was connected to the knife by welding because no holes were observed. The end decoration of the knife was made by using an iron plate formed into a shape, half covered by silk, and the other half decorated with silver plate and a gold ring. The sword with an undecorated ring pommel excavated from the ancient tombs of Jeongchon Village comprises the metals of gold, silver, and iron, and includes features of Baekje, Silla, and Gaya, which highlights the influence of surrounding historic sites and various cultures.

A Numerical Study of the Performance Assessment of Coupled Thermo-Hydro-Mechanical (THM) Processes in Improved Korean Reference Disposal System (KRS+) for High-Level Radioactive Waste (수치해석을 활용한 향상된 한국형 기준 고준위방사성폐기물 처분시스템의 열-수리-역학적 복합거동 성능평가)

  • Kim, Kwang-Il;Lee, Changsoo;Kim, Jin-Seop
    • Tunnel and Underground Space
    • /
    • v.31 no.4
    • /
    • pp.221-242
    • /
    • 2021
  • A numerical study of the performance assesment of coupled thermo-hydro-mechanical (THM) processes in improved Korean reference disposal system (KRS+) for high-level radioactive waste is conducted using TOUGH2-MP/FLAC3D simulator. Decay heat from high-level radioactive waste increases the temperature of the repository, and it decreases as decay heat is reduced. The maximum temperature of the repository is below a maximum temperature criterion of 100℃. Saturation of bentonite buffer adjacent to the canister is initially reduced due to pore water evaporation induced by temperature increase. Bentonite buffer is saturated 250 years after the disposal of high-level radioactive waste by inflow of groundwater from the surrounding rock mass. Initial saturation of rock mass decreases as groundwater in rock mass is moved to bentnonite buffer by suction, but rock mass is saturated after inflow of groundwater from the far-field area. Stress changes at rock mass are compared to the Mohr-Coulomb failure criterion and the spalling strength in order to investigate the potential rock failure by thermal stress and swelling pressure. Additional simulations are conducted with the reduced spacing of deposition holes. The maximum temperature of bentonite buffer exceeds 100℃ as deposition hole spacing is smaller than 5.5 m. However, temperature of about 56.1% volume of bentonite buffer is below 90℃. The methodology of numerical modeling used in this study can be applied to the performance assessment of coupled THM processes for high-level radioactive waste repositories with various input parameters and geological conditions such as site-specific stress models and geothermal gradients.

A Study on the Characteristics of Plant Fiber Materials for Diffusion Tensor Imaging Phantom (확산텐서영상 팬텀 제작을 위한 식물섬유 재료의 특성에 관한 연구)

  • Lee, Jung-Hoon
    • Journal of radiological science and technology
    • /
    • v.43 no.6
    • /
    • pp.475-480
    • /
    • 2020
  • The purpose of this study was to reconstruct diffusion tensor tractography (DTT) using stem of garlic and asparagus for in vitro phantom of diffusion tensor imaging (DTI), and to compare and evaluate the fractional anisotropy (FA) value and the apparent diffusion coefficient (ADC) value to determine whether it can be used as materials for in vitro phantoms. Among various plant fibers such as stem of garlic, palmae, cotton, asparagus, etc., stem of garlic and asparagus, which are considered to be the most suitable for making phantoms, and whose shape is considered to be the most suitable for making phantoms, were selected and tests were conducted. Holes were made in a plastic bucket at an angle of 0°, 30°, 60°, 90°, and 120°, then tubes were inserted. In the tube, asparagus and stem of garlic were inserted as far in as possible, and the inserted tube was inserted into the center of the heat bathed gelatin to harden. We were able to reproduce DTT images in asparagus and stem of garlic. Fiber tissues of asparagus and stem of garlic did not show complete connectivity, but the reconstructed images of DTT showed good connectivity. The FA values of asparagus in the tubes were 0.198 at 0° (straight), 0.207 at 30°, 0.187 at 60°, 0.231 at 90°, and 0.204 at 120°. In addition, the FA values of stem of garlic in the tubes were 0.235 at 0°, 0.236 at 30°, 0.216 at 60°, 0.218 at 90°, and 0.257 at 120°. The ADC values of asparagus in the tubes were 1.545 at 0°, 1.677 at 30°, 1.629 at 60°, 1.535 at 90°, and 1.725 at 120°. In addition, the ADC values of stem of garlic in the tubes were 1.252 at 0°, 1.396 at 30°, 1.698 at 60°, 1.756 at 90°, and 1.466 at 120°. For the best expressed DTT reconstruction image, it showed the longest connectivity in the straight line as we hypothesized. In addition, when comparing the FA values and ADC values of fiber tissues of stem of garlic and asparagus, FA value was generally higher in stem of garlic and ADC value was slightly higher in asparagus.

Analysis of Paleo Sedimentary Environment of Gochang Coast Using Grain Size Distribution Characteristics (입도분포 특성을 기반으로 한 고창 연안의 과거 퇴적환경 분석)

  • Han, Min;Yang, Dong-Yoon;Park, Chanhyeok
    • Journal of The Geomorphological Association of Korea
    • /
    • v.25 no.3
    • /
    • pp.43-55
    • /
    • 2018
  • This study aimed to identify different sedimentary environments of Gochang coast according to geomorphic conditions of each bore hole. To achieve the aim, this study utilized the classification of sedimentary environmental conditions of surface sediment, which was based on grain size distribution characteristics.In other words, three sedimentary environmental conditions ofsandy flat + sand beach, coastal sand dune and weathered bedrock soil, which were distinguished based on grain size distribution characteristics of mean-sorting for surface sediments, were applied to the sediments of bore holes. Four sedimentary environments could be identified in Gochang coast. First, the lake sedimentary environment originated from terrestrial sediments seems to have been dominated by weathered bedrock soil that the surface flow has deposited in a coastal wetland or a boundary, which is affected by the sea. Second, the lake sedimentary environment that is little affected by coastal sand dunes is located at the center of a valley, which is connected to the land, and the dune slack of Saban-ri. The surface flow of weather bedrock soil is the main source of deposits. However, there seems to have been a temporary influence of the sea. Third, the lake sedimentary environment that is strongly affected by coastal sand dunes is located at the dune slack of Yeongjeong-ri. This environment shows traces of a change from a coastal sand dune into the dune slack. Finally, the coastalsand dune sedimentary environment, which wasinvestigated by boring the current coastal sand dune, shows a temporary influence of the land but seems to have maintained the overall stability. Consequently, this study demonstrated that the grain size distribution characteristics of the present surface sediments could be effectively applied to identify the sedimentary environments of the paleo bore hole sediments. In addition, the paleo change of sedimentary environment could also be identified in many places of Gochang coast. If the results of this study are combined with the age dating and geochemical analysis in future works, the paleo environmental change in Gochang coast will be restored more precisely.

Path to Poverty of Sick Workers and Fictional Korean Social Security (아픈 노동자는 왜 가난해지는가? - 아픈 노동자의 빈곤화과정과 소득보장제의 경험)

  • Lee, Sophia Seung-yoon;Kim, Ki-tae
    • 한국사회정책
    • /
    • v.24 no.4
    • /
    • pp.113-150
    • /
    • 2017
  • This study analyzes how workers become impoverished and have their jobs less stabilized after they suffer from non-job-related sickness. Given that South Korea lacks sickness benefits, which most of OECD member states legislate and implement except US and Switzerland, this study examines its impact on laborers' job stability and povertization in Korea. The researchers have conducted in-depth interviews with nine former or present laborers who have the experiences and four experts on the issue in July-September, 2017 for the qualitative analysis. It is found that laborers, after becoming aware of their sickness, at first endure their pain without informing their employers not to lose their jobs. The attititude is observed especially among non-standard laborers, because sickness more often leads to job loss for them than for standard laborers. After workers have to leave their jobs due to their sickness in the end, they have no choice but to keep working in less stable jobs to compensate for income losses. They become gradually impoverished with their social capital like family bond declining. We observe laborers who are eligible for industrial accident insurance compensation could not benefit from the system because some employers refrain from the legal reporting duty. Due to this illegal practices, some industrial accident victims unduly lose their jobs due to "non-job-related sickness". Second, some employers report to the authority that their sick laborers have left their jobs 'voluntarily' even when they have quitted it without their volition, in which case the newly unemployed are not eligible for unemployment benefits. Large holes in Korea's safety nets for those suffering from multiple risks of sickness and unemployment.

The Development of Geosites and 3D Panoramic Geological Virtual Field Trips for Sinsu Island in Korea National Marine Park (남해 해상 국립공원 신수도의 지질명소 및 3D 파노라마 야외학습장 개발)

  • Cho, Jae-Hee;Yoon, Ma-Byong
    • Journal of the Korean Society of Earth Science Education
    • /
    • v.15 no.1
    • /
    • pp.91-102
    • /
    • 2022
  • Sinsu Island in Korea National Marine Park is suitable for geological learning and geotourism as various geological structures, geological activities, and fossils can be observed. In this study, eight geosites were developed by analyzing 2015 revision science curriculum. The 3D panoramic geological virtual field trips were developed according to the three-step outdoor learning model. The 3D panoramic geological virtual field trips, which consist of 8 classes, are composed of cooperative learning by group, enabling autonomous inquiry activities. It is designed to realize convergence education that can learn not only geology but also creativity and humanity through nodular Limestones, exfoliation, salt weathering, perforated shell holes, sedimentary structures and environments, dinosaurs habitats, and volcanic activity. Five experts revised and supplemented the Delphi analysis method to verify the validity of the development purpose and direction. The satisfaction with the geological field for Sinsu Island course was 4.52, indicating that the overall satisfaction with the field course was high. By reflecting on the opinions of each student and reinforcing safety education, we completed the 3D panoramic geological virtual field trips for Sinsu Island. The 3D panoramic geological virtual field trips in Sinsu Island in Korea National Marine Park will be a good example of geology learning tourism where you can make memories and enjoy while studying geology.