• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.191-203
• /
• 2018

IIn this study, we have developed drying systems for reducing the error by humidity on measuring particulate matter (PM) in the ambient air with optical particle measuring instruments. Two types of drying systems were designed: drying systems using heating and dilution methods. In addition, 3 types of drying systems using a heating method were designed: Type A (1 hole), B (3 holes) and C (7 holes). After making them, the laboratory and field tests were carried out to evaluate the developed drying systems. As a result, it was shown that the PM concentrations obtained by PM monitoring devices with drying systems agree well with that of the reference devices. Therefore, it could be concluded that the drying systems can be applied to PM monitoring devices for real-time monitoring of the ambient aerosols.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.52-57
• /
• 2019

To develop a stirring device that can automatically measure the viscosity of a fluid, the impeller type of the device must be recognized without making contact. In this study, we propose a method to discriminate the type of impellers using the changes in the magnetic field. Permanent magnets are inserted into a hollow hole of the impellers, and the change of the magnetic field is measured by a hall sensor. All experimental results are compared with the FEM analysis results. The results show that with the increase in diameter and length of the magnet inserted into the impeller, the magnitude of the magnetic flux density increases. The magnetic field is more sensitive to the change in the magnet diameter than to the change in magnet length. In order to reduce the machining costs, however, it is advantageous to change the magnet length instead of the magnet diameter.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.170-174
• /
• 2023

Nickel oxide is a nonstoichiometric transparent conductive oxide with p-type conductivity, a wide-band energy gap of 3.4~4.0 eV, and excellent chemical stability, making it a very important candidate as a material for bipolar devices. P-type conductivity in Transparent Conductive Oxides (TCO) is controlled by the oxygen vacancy concentration. During the TCO film deposition process, additional oxygen diffusing into the NiO structure causes the formation of Ni 3p ions and Ni vacancies. This eventually affects the hole concentration of the p-type oxide thin film. In this work, the surface morphology and the electrical characteristics were confirmed in accordance with the annealing atmosphere of the nickel oxide thin film.

• 기술사
• /
• 제2권5호
• /
• pp.4-18
• /
• 1969

This experiment was conducted, making use of the "NONG-RlM 6", a recommended variety of rice for year of 1968. Main purposes of the experiment are to explore possibilities of: a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the circulation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm-lined plot, the grain weight is 23.5 grams, the heaviest. Next in order are 3cm-lined plot, 6cm-lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of solid, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and the plot irrigated at an interval of 6 days, 16.3. 5) In vinyl-treated plots, it is shown that both yield and component element are greatest in the case of the plot with hole of 3$cm/m^2$. Next in order are; the plot with a hole of 2$cm/m^2$; the plot with a hole of 1$cm/m^2$. In the case of the plot with no hole, it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water requirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the un control plot is 1,590 mm, as compared to 876 mm (44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot, 1,010mm (36% saved) for the 3cm-lined plot, and 1,082mm (32% saved) for the wheat straw lined plot. In the case of the rotation irrigation method, it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm (65.3% saved), as compared to 617mm (61.1% saved) for the plot irrigated at an interval of 7 days, 672mm (57.7% saved) for the plot irrigated at an interval of 6 days, 746mm (53.0% saved) for the plot irrigated at an interval of 5 days, 890mm (44.0% saved) for to plot irrigated at an interval of 4 days, and 975mm (38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapo-transpiration is found 2.8 around the end of the month of July, as compared to 2.6 at the begining of August, 3.4 around the end of August, and 2.6 at the begining of September. 8) It is found that the saturaton quantity of 30 mm per day is decreased to 20mm per day through the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.23-33
• /
• 2011

This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.655-662
• /
• 2016

의료용 CT영상에서 영상의 화질 저하의 원인으로 인공물을 유발의 원인인 다양한 금속성분의 의료용 재료를 이용하여, 듀얼에너지 CT의 MAR 알고리즘적용 전, 후 영상의 CT value값을 비교 측정하고, 정량적 분석을 통해 MAR Algorithm 적용의 유용성을 알아보았다. 그 결과 MAR 알고리즘 적용 시 대부분의 의료용 금속 물질에서 인공물 감소효과가 있었다(P<0.05). 특히, 의료용 금속물질 중 Stainless합금(78.1% 감소)과 백금소재인 GDC coil(76.1% 감소)처럼 상대적으로 밀도가 높은 의료용 금속물질에서 인공물 감소효과가 높았다(P<0.05). 또한, 인공물 형태에 따른 인공물 감소정도를 정량적 분석을 통해 알아보았다. 그 결과는 MAR 알고리즘 적용 시 Stainless합금과 Titanium합금의 경우 Black hole artifact형태에서 인공물 감소효과가 매우 우수하였고(P<0.05), 백금소재인 GDC coil의 경우는 White streak artifact형태에서 인공물 감소효과가 매우 우수하였다(P<0.05). 향후 의료용 금속 물질 삽입 수술 환자의 경우 듀얼 에너지 CT장비의 MAR알고리즘을 적용하여 CT검사를 시행한다면 금속물질에 기인한 인공물 유발을 감소시켜 보다 뛰어난 화질의 영상정보를 제공할 수 있을 것으로 사료된다.

• 가정과삶의질연구
• /
• 제24권1호
• /
• pp.159-179
• /
• 2006

Each ethnic group has different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contacts. The purpose of this study was to compare domestic living of Korean immigrants with Australians in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 52 Korean households and 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The most popular type of Living-Dining-Kitchen arrangement was L+ K. D for Koreans and L. D . K for Australians. 2. A laundry room was indispensable for both and they all wanted to do ironing in there as well as dry. Both were satisfied with the type which toilet was separated from the bathroom Drain hole on the floor of the bathroom was not indispensable for most Koreans and Australians. 3. Koreans and Australians were doing various activities in living area and both were getting together around kitchen(dining) area. The particular thing of Koreans was that they were using the main bedroom with multiple purpose. 4. The seating style of Koreans and Australians belong to chair-seating style generally. But Koreans were using floor seating style in making bed for the guest and making Kimchi. Koreans and Australians were using mixed style of floor seating and chair-seating in relaxing time with watching TV, treating guest or so. 5. Koreans were not satisfied with using carpet cause of dust but Australians were satisfied with the carpet cause of warmness. 6. Most Koreans and Australians were take off shoes inside of the house. Koreans were organize shoes around the front door of the house usually and Australians were organize shoes in bedroom usually. 7. The most popular heating system was ducted heating for both. The level of satisfaction about ducted heating was low for Koreans because they though that it could contaminate air. Australians were satisfied with ducted heating because they though that this one was fit on the weather of this area. 8. Living room was the most important one for Koreans and Australians and they also thought it should be decorated well for entertaining guests. Most Koreans were estimate that the brightness of the light of the house was not enough but it was estimated to moderate for Australians on the contrary.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.117-128
• /
• 1997

Using barrier membrane, guided bone regeneration(GBR) and guided tissue regeneration(GTR) of periodontal tissue are now widely studied and good results were reported. In bone regeneration, not all cases gained good results and in some cases using GTR, bone were less regenerated than that of control. The purpose of this study is to search for the method to improve the success rate of GBR and GTR by examination of the cause of the failure. For these study, rats and beagle dogs were used. In rat study, 5mm diameter round hole was made on parietal bone of the rat and 10mm diameter of bioresorbable membrane was placed on the bone defects and sutured. In 1 ,2, 4 weeks later, the rats were sacrificed and Masson-Trichrome staining was done and inspected under light microscope for guided bone regeneration. In dog study, $3{\times}4mm^2$ Grade III furcation defect was made at the 3rd and 1th premolar on mandible of 6 beagle dogs. The defects were covered by bioresorbable membrane extending 2-3mm from the defect margin. The membrane was sutured and buccal flap was covered the defect perfectly. In 2, 4. 8 weeks later. the animals were sacrificed and undecalcified specimens were made and stained by multiple staining method. In rats. there was much amount of new bone formation at 2 weeks. and in 4 weeks specimen, bony defect was perfectly dosed and plenty amount of new bone marrow was developed. In some cases, there were failures of guided bone regeneration. In beagle dogs, guided tissue regeneration was incomplete when the defect was collapsed by the membrane itself and when the rate of resorption was so rapid than expected. The cause of the failure in GBR and GTR procedure is that 1) the membrane was not tightly seal the bony defects. If the sealing was not perfect, fibrous connective tissue infiltrate into the defect and inhibit the new bone formation and regeneration. 2) the membrane was too tightly attached to the tissue and then there was no space to be regenerated. In conclusion, the requirements of the membrane for periodontal tissue and bone regeneration are the biocompatibility, degree of sealingness, malleability. space making and manipulation. In this animal study. space making for new bone and periodontal ligament, and sealing the space might be the most important point for successful accomplishment of GBR and GTR.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.60-69
• /
• 2013

Timber is an eco-friendly material that is suitable for low carbon and green growth, and recently, studies on utilization and manufacture of timber are increasing. Thus, we need a stable supply of wood working materials for the formative element and widespread function of timber. It is necessary to develop the use of timber because it enhances the added value of this material by making the most of it. In this way, skin-timber is an appropriate material for life articles because skin-timber has a variety of functions including the ability for storage use, the beauty of structure, the ability to maintain heat and insulation, and the capability to control humidity. In this study, I developed household items using skin-timbers that are made up of circular columns and square columns of pine, larch, and yellow popular. The circular and square columns have an inner hole that is approximately 90% of the external structure's width. I intended for the concept of these designs to display creativity considering functionality and productivity. These items are life articles and furniture for modern people. They are eco-friendly products that are varnished with traditional lacquer and natural oil. According to the result of this study, skin-timbers are made of domestic pine, larch, and yellow popular and are resource of furniture, household items, and woodcraft. I believe skin-timber is not only a useful material for processability and design applicability, but it also has the capability to be a multifunctional and high value-added material. Also, if the standards, such as cortex thickness, outside diameter, and length, of skin-timber are producted diversely, I believe skin-timber can be have more the possibility of industrial products' development.

• Applied Microscopy
• /
• 제39권2호
• /
• pp.199-204
• /
• 2009

본 연구는 펌 염색을 한 번도 경험하지 않은 13세의 건강한 여성의 모발에 펌을 반복 시술하여 모발 표면의 형태적 변화를 주사전자현미경을 사용하여 관찰하였다. 펌1차 시술한 모발 표면은 큐티클 세포의 끝 부분들이 불규칙하게 쪼개져 나갔으며, 비늘의 가장자리 끝부분이 거칠은 상태로 관찰되었다. 그리고 큐티클세포들이 분리되고 공간이 형성되면서 표면 쪽으로 부풀어 오른 것을 확인하였다. 펌3차 시술한 모발의 경우에는 모발 표면에서 큐티클 세포와 세포 사이가 들떠서 분리되어 있고 중첩된 큐티클층 표면에 중첩된 비늘은 표면적이 불규칙하게 나타났다. 표면에 부서진 큐티클 세포의 세포질 일부가 부착되어 있으며 세포질 내의 내큐티클에는 공포가 형성되어 있었다. 펌의 횟수가 증가할수록 큐티클층과 피질의 분리가 쉽게 일어나는 것을 확인하였다.