• 대한화학회지
• /
• 제43권3호
• /
• pp.315-320
• /
• 1999

고성능 전계발광(electroluminescent, EL) 소자에 사용되는 발광물질의 개발을 위하여 설계된 발광기능기의 분자구조는 비스스틸렌구조의 발광기능기에 전자주입과 수송을 위한 시안기와 정공주입과 수송을 위한 페닐아민기를 가진 구조이다. 위의 발광기능기로 구성 된 고분자물질, PU-BCN과 저분자물질, D-BCN을 합성하였다. PU-BCN과 D-BCN을 발광층으로 사용하여 만들어진 단층형 소자(SL)의 구조는 Indium-tin oxide(ITO)/발광층/MgAg이고, 적층형소자의 구조는 ITO/발광층/oxadiazole dehvative/MgAg, (DL-E)와 ITO/tri-phenylamine derivative/발광층/MgAg,(DL-H)의 두 종류이다. 동일한 발광기능기를 가진 고분자 발광물질, PU-BCN과 저분자발광물질, D-BCN은 전하주입과 수송성이 띄어난 물질로 평가되었으며, 두 발광물질들은 높은 전류밀도하에서 거의 동일한 발광특성을 보였다. 발광물질들의 최대 발광 피이크는 약 640 nm의 적색 발광영역에서 측정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.1067-1070
• /
• 2011

We have demonstrated that solution-based fabrication of NiO films as HTL can be used for the construction of IOSCs. Type of solvent of NiO-solution, and annealing procedure of the active layers were optimized for obtaining a PCE of 3% of IOSC. The photovoltaic performance of NiO-based device is comparable to that of the same type of solar cell using PEDT:PSS instead of NiO. These solution-based processes can be a promising method for a mass production OSCs under ambient condition.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1403-1406
• /
• 2007

An effective WOLED structure was demonstrated which improved a luminous efficiency and white color chromaticity independent on applied bias by employing effective carrier transporting layer, without any alteration of emissive materials. The modified WOLEDs exhibited 2 times higher luminous efficiency than the control device and showed balanced white emission during an operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.299-302
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of multicolor emission low operation voltage. In this study, several Eu complexes such as Eu(TPB)$_3$(Phen) and Eu(TPB)$_3$(Bpy) were synthesized and the photoluminescence(PL) and electroluminescence (EL) characteristics of their thin films were investigated by fabricating the devices having a structure of glass substrate/ITO/TPD/Europium-complexs/Alq$_3$/Al, where aromatic diamine(TPD) was used as an hole transporting and Alq$_3$ was used as an electron transporting materials. It was found that the photoluminescence(PL) and electroluminescence(EL) characteristics of these Europium complexes were dependent upon the ligands coordinated to Europium metal. Details on the explanation of electrical transport phenomena of the structure with I-V characteristics of the OLEDs using the trapped-charge-limited current(TCLC) model will be discussed.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.43-45
• /
• 2002

We have theoretically investigated steady-state carrier transport and current self-oscillation in negative-effective-mass (NEM) p$\^$+/pp$\^$+/diodes. The current self-oscillation here is a result of the formation and traveling of electric field domains in the p base having a NEM. The dependence of self-oscillating frequency on the applied dc voltage is obtained by detailed numerical simulations. In the calculations, we have considered the scatterings by carrier-impurity, carrier-acoustic phonon, carrier-polar-phonon, and carrier-nonpolar-phonon-hole interactions . This kind of NEM oscillator allows us to reach a current oscillation with terahertz frequency, thus it may be used as a broadband source of terahertz radiation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.428-428
• /
• 2013

Red color light emitting diodes were fabricated using CdSe/CdS/ZnS quantum dots (QDs). Patterned indium-tin-oxide (ITO) was used as a transparent anode, and oxygen plasma treatment on a surface of ITO was performed. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was spin coated on the ITO surface as a hole injection layer. Then CdSe/CdS/ZnS QDs was spin coated and thermal treatment was performed for the cross-linking of QDs. TiO2 was coated on the QDs as an electron transport layer, and 150 nm of aluminum cathode was formed using thermal evaporator and shadow mask. The device shows a pure red color emission at 606 nm wavelength. Device characteristics will be presented in detail.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.28-30
• /
• 2009

We have studied organic layer-thickness dependent electrical and optical properties of bottom- and top-emission devices. Bottom-emission device was made in a structure of ITO(170 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(100 nm), and a top-emission device in a structure of glass/Al(100 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(25 nm). A hole-transport layer of TPD (N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine) was thermally deposited in a range of 35 nm and 65 nm, and an emissive layer of $Alq_3$ (tris-(8-hydroxyquinoline) aluminum) was successively deposited in a range of 50 nm and 100 nm. Thickness ratio between the hole-transport layer and the emissive layer was maintained to be 2:3, and a whole layer thickness was made to be in a range of 85 and 165 nm. From the current density-luminance-voltage characteristics of the bottom-emission devices, a proper thickness of the organic layer (55 nm thick TPD and 85 nm thick $Alq_3$ layer) was able to be determined. From the view-angle dependent emission spectrum of the bottom-emission device, the peak wavelength of the spectrum does not shift as the view angle increases. However, for the top-emission device, there is a blue shift in peak wavelength as the view angle increases when the total layer thickness is thicker than 140 nm. This blue shift is thought to be due to a microcavity effect in organic light-emitting diodes.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.19-23
• /
• 2007

The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.191-194
• /
• 2003

The influence of on ion beam irradiation to the indium tin oxide (ITO) substrate on the performance of the organic light-emitting diodes (OLEDs) was studied. ITO films were used as the transparent anode of OLEDs with poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) as a hole-injection/transport layer. Oxygen and argon plasma treatment of ITO resulted in a change in the work function and the chemical composition. For plasma treated ITO anodes, the device efficiency clearly correlated with the value of the work function. We also discussed the implications of our experimental study in relation to the modification of the ITO surface composition, transmittance, reflectance, and water contact angle (WCA).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.21-24
• /
• 2003

The understanding of the mechanism of device degradation has been accomplished recently, for devices using $AlQ_3$ electron transport and emitter molecule. In this presentation the experimental evidence for the degradation mechanism of $AlQ_3$ based devices will be reviewed, showing that the hypothesis of an unstable $AlQ_3^+$ cation explains a large amount of experimental data. This hypothesis, however, explains not only the room temperature device degradation in time but also sheds light on temperature stability of OLEDs. Dependence of half-life of a series of devices with an emitter layer composed of a mixture of $AlQ_3$ and different hole transport molecules (mixed emitter layer) will be discussed when they are operated at elevated temperatures. These results can also be explained in the framework of an unstable $AlQ_3^+$ species. An OLED structure containing a doped mixed emitter layer will be described, which shows extraordinary stability, half-life of 1200 hours at operating temperature of 70 C and initial luminance of 1650 $cd/m^2$. We will also discuss a novel Black $Cathode^{TM}$ OLED with reduced optical reflectivity, which is also stable at elevated temperatures. The new cathode utilizes a conductive light-absorbing layer made of a mixture of metals and organic materials.