• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.275-276
• /
• 2005

Organic Light Emitting Diodes(OLEDs) are attractive as alternative display components because of their relative merits of being self-emitting, having large intrinsic viewing angle and fast switching speed. But because of their relatively short history of development, much remains to be studied in terms of their basic device physics and design, manufacturing techniques, stability and so on. We invested electrical properties of N,N-diphenyl-N,N bis (3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and tris-8-hydroxyquinoline aluminum($Alq_3$) when their thicknesses were changed variedly from 3:7 to 7:3 of their thickness ratios. And we also studied properties of OLEDs depend on their deposition rate between 0.05$\sim$0.2 [nm/s].

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.205-210
• /
• 1989

The purpose of this study was to observe the minim pins of Link plus (which has buttress thread and shoulder stop design) inserted into dentin and the dentin surrounding pin. The gingival walls of class II cavity were prepared with high speed handpiece in molar teeth not elapsed time after teeth were extracted, and pinhole of 2mm in depth was positioned about 1 mm to the dentinoenamel junction and minim pin was inserted with wrench. After initial examination of the specimens, the specimens were sectioned longitudinally and horizontally to the pins with carborundum disc and low speed diamond saw (Isomet Buehler Ltd) All specimens were coated Au of 250-300${\AA}$ in thickness with Ion Sputter JFC 100 and observed under Scanning Electron Microscope (JSM-35) The following results were obtained. 1. The shoulder stop was seated on the enterance of pinhole in gingival wall, and there were the irregular space between the pin and dentin at the enterance to the pin hole and flakes of dentin lifting from the dentin floor. 2. In case of section to pin horizontally or longitudinally, the dentin debris were observed in gap between pin and dentin, and small cracks were often seen in the dentin surrounding minim pins.

• Composites Research
• /
• 제25권4호
• /
• pp.105-109
• /
• 2012

최근 국내에서 미국과 상호항공안전협정 체결을 위한 소형 항공기가 연구 개발 중이다. 연구 대상 항공기는 경량화 하여 연료 절감을 위해 전기체 복합재료가 적용되었다. 그러나 복합재 구조는 외부의 충격 손상에 취약한 구조이다. 따라서 항공기 구조물은 충격 손상에 대한 압축 파손 강도를 고려하여 손상 허용 설계가 반드시 수행되어야 한다. 이는 복합재 구조 항공기 인증에 매우 중요한 요소이다. 본 연구에서는 항공기 복합재 구조에 적용된 두꺼운 적층판에 대한 손상 허용 연구를 수행하였다. 두꺼운 적층판의 세 가지 형태인 손상이 없는 시편, 구멍 손상 및 충격 손상이 적용된 시편의 압축 하중 하에서 손상 허용 기준이 평가되었다.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.16-23
• /
• 2008

30 톤급 실물형 연소기의 산화제 매니폴드에서의 유동 균일성 문제를 파악하기 위하여 유동해석을 수행하였다. 분사기의 모사를 위하여 다공성 매질로 가정하고, 다공성도 (porosity)를 조절하여 분사기 차압을 모사하였다. 수직 및 수평 분리막에서의 구멍의 직경, 입구 포트의 형상에 따른 유동의 균일성 정도를 파악하고, 개선된 설계 수정안을 제시하였다. 수직 및 수평 분리막 구명의 형태와 배치 수정을 통하여 유량 균일성을 향상시킬 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.229-234
• /
• 2005

Kinetic friction coefficient, bulk density, dynamic and static angle of repose, and terminal velocity of rice husk at the moisture range 7 to $23\%$ w.b. were determined. It could lead to better design and operation of the processing machinery and handling facilities. Friction coefficient was determined from the horizontal traction force measured by pulling the container holding a mass of rice husk on various plate materials. Dynamic angle of repose was calculated from the photos of bulk samples piled by gravity flow on a circular platform. Static angle of repose was determined by measuring the side angle of the bulk material which was left in a cylindrical container after natural discharge of the bulk sample through a circular hole in the bottom plate. Kinetic friction coefficients of rice husk were in the range of $0.254\~0.410,\;0.205\~0.520,\;0.229\~0.400,\;and 0.133\~0.420$ on PVC, mild steel, galvanized steel, and stainless steel, respectively. Bulk density, dynamic and static angle of repose, and terminal velocity were in the range of $91.7\~98.3$ $kg/m^3$, $40.2\~47.6^{\circ},\;52.8\~83.7^{\circ},$ and $1.36\~1.73$ m/s, respectively. These physical properties of rice husk increased linearly as the moisture content increased.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.583-590
• /
• 1998

This study was performed to determine the kinetic friction coefficient bulk density, dynamic and static angle of repose, and terminal velocity of the chopped rice straw in the moisture range of 8~23%, which could be used for better design and operation of the processing machinery and handling facilities. Friction coefficient was determined from the horizontal traction force measured by pulling the container holding the mass of rice straw on the various plate materials. Bulk density was measured with an apparatus consisting of a filling funnel and a receiving vessel. Dynamic angle of repose was calculated from the photos of bulk samples piled by gravity flow on a circular platform. Static angle of repose was determined by measuring the side angle of the bulk material which was left in the cylindrical container after natural discharge of the bulk sample through a circular hole in the bottom plate. Kinetic friction coefficients of rice straw on the PVC, mild steel, stainless steel, and galvanized steel were in the range of 0.303~0.434, 0.222~0.439, 0.204~0.448, and 0.206~0.407, respectively. and indicated linear increase with moisture content. The effects of moisture change on the friction coefficients were in the order of PVC, mild steel, galvanized steel, and stainless steel. Bulk density, dynamic and static angle of repose, and terminal velocity were in the range of 56.8~60.3 kg/m$^3$, 41.4~45.9$^{\circ}$, 94.4~100.8$^{\circ}$, and 1.07~4.48 m/s, respectively, and were increased linearly with the moisture content.

• 신재생에너지
• /
• 제1권4호
• /
• pp.30-37
• /
• 2005

Cycle simulation of Ground Source Heat Pump[GSHP] system was carried out to determine the design specification of basic components such as turbo compressor and heat exchangers. Part load operation characteristics of the designed GSHP system was estimated using the compressor and heat exchanger performance data. A 50RT class turbo compressor for GSHP system is now under development, in which R134a refrigerant is adopted as working fluid. The compressor with variable cascade diffusers is designed to work both in cooling and heating modes so that it can actively keep up with the climate change with high efficiency. The normal running speeds of the compressor are 59000rpm for heating mode and 70000rpm for tooling mode respectively. It has two identical impellers at both ends of the rotor so as to minimize aero-induced thrust force effectively. GSHP system was coupled with a vortical type heat exchanger, and heat gain and heat loss from ground were evaluated per a bore hole. For the optimal integration of the heat pump system, its header for circulating fluid was combined with the ground heat exchangers in parallel and series configuration.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.63-70
• /
• 2010

We developed a new punching system that generates pinholes expressing texts or images on a plastic plate. The pin-holed plate is used as a new glamorous display board reflecting colorful lights from the light emitting diode (LED) installed on the edge side of the plate. The four degree-of-freedom punching system was designed to make same multiple holes on four plastic plates simultaneously. For this motion, we designed a structure for a simultaneous motion of the system. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, fast motion including precise position control is very important. We also built a PC-based integrated control system including a GUI program to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and position control of the pin holes on the plate.

• 물과 미래
• /
• 제27권1호
• /
• pp.101-109
• /
• 1994

본 연구에서는 배수갑문, 보등의 수리구조물 하류부에서 발생되는 와에 의한 2차선굴의 물리적 특성을 규명하고, 와의 평균 마찰속도를 에너지 보존법칙에 의해 산출하였다. 또한 와에 의해 발생되는 선굴량을 마찰속도에 의한 소류력 및 난류에 의한 양력의 항으로써 정량적으로 산출하였다. 분석 결과 수리구조물 하류부에서 발생되는 와는 하천 사주 뒷면에서 발생되는 그것에 비해 강도가 세고 끊임없이 발생되는 대규모 난류성을 지니고 있음을 알 수 있었다. 또한 와의 마찰속도는 물받이 끝단의 유속으로 나타낼 수 있으며, 따라서 하상입자의 성질과 흐름의 유속을 알면 선굴량을 산정할 수 있는 방법을 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권6호
• /
• pp.1133-1151
• /
• 2010

Energy balanced consumption routing is based on assumption that the nodes consume energy both in transmitting and receiving. Lopsided energy consumption is an intrinsic problem in low-cost sensor networks characterized by multihop routing and in many traffic overhead pattern networks, and this irregular energy dissipation can significantly reduce network lifetime. In this paper, we study the problem of maximizing network lifetime through balancing energy consumption for uniformly deployed low-cost sensor networks. We formulate the energy consumption balancing problem as an optimal balancing data transmitting problem by combining the ideas of corona cluster based network division and optimized transmitting state routing strategy together with data transmission. We propose a localized cluster based routing scheme that guarantees balanced energy consumption among clusters within each corona. We develop a new energy cluster based routing protocol called "OECR". We design an offline centralized algorithm with time complexity O (log n) (n is the number of clusters) to solve the transmitting data distribution problem aimed at energy balancing consumption among nodes in different cluster. An approach for computing the optimal number of clusters to maximize the network lifetime is also presented. Based on the mathematical model, an optimized energy cluster routing (OECR) is designed and the solution for extending OEDR to low-cost sensor networks is also presented. Simulation results demonstrate that the proposed routing scheme significantly outperforms conventional energy routing schemes in terms of network lifetime.