• Journal of the Korean earth science society
• /
• v.45 no.4
• /
• pp.292-303
• /
• 2024

We study quasi-spherical, supersonic accretion flows around black holes using high-accuracy numerical simulations. We describe a code, the Lagrangian Total Variation Diminishing (TVD), and a remap routine to address a specific issue in the Advection Dominated Accretion Flow (ADAF) that is, appropriately handling the angular momentum even near the inner boundary. The Lagrangian TVD code is based on an explicit finite difference scheme on mass-volume grids to track fluid particles with time. The consequences are remapped on fixed grids using the explicit Eulerian finite-difference algorithm with a third-order accuracy. Test results show that one can successfully handle flows and resolve shocks within two to three computational cells. Especially, the calculation of a hydrodynamical accretion disk without viscosity around a black hole shows that one can conserve nearly 100% of specific a ngular momentum in one-and two-dimensional cylindrical coordinates. Thus, we apply this code to obtain a numerically similar ADAF solution. We perform simulations, including viscosity terms in one-dimensional spherical geometry on the non-uniform grids, to obtain greater quantitative consequences and to save computational time. The error of specific angular momentum in Newtonian potential is less than 1% between r~10r_s and r~10⁴ r_s, where r_s is sink size. As Narayan et al. (1997) suggested, the ADAFs in pseudo-Newtonian potential become supersonic flows near the black hole, and the sonic point is r_sonic~5.3r_g for flow with α =0.3 and γ=1 .5. Such simulations indicate that even the ADAF with γ=5/3 is differentially rotating, as Ogilvie (1999) indicated. Hence, we conclude that the Lagrangian TVD and remap code treat the role of viscosity more precisely than the other scheme, even near the inner boundary in a rotating accretion flow around a nonrotating black hole.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.726-729
• /
• 1991

In this paper it is discussed about the program which makes automatically the preprocessing data on the graphic editor of PC monitor. Three kinds of colors are used in order to make know a boundary_element, in_element, out_element. By initial mesh generation, three kinds of elements are made; the element with three nodes, four nodes, five nodes. The node of boundary element draw a vertical line to the boundary. At that time the element with three nodes is removed and the element with four nodes is changed to the element with four nodes. The domain graphic on this paper is compose of piecewise curves which has many lines and a hole. The data of element is written on the memory of PC computer. The program controls the memory address according to the change of element's quantity; disappearance and addition of element. All this work is operated on the PC computer.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.36-39
• /
• 2004

In this study, we present the theoretical, numerical and experimental results of the sink flow from a rotating, circular tank Strikingly enough, when the upper free surface was set with no-slip boundary conditions, the Ekman boundary-layer develops not only above the bottom surface but under the free surface. The sink fluid is coming from the two Ekman layers, and the mass transfer from the bulk, inviscid region is dependent on the rotational speed. It is also remarkable to see that all the fluid gathered along the axis flows through a rapidly rotating fluid column with almost the same size as the hole.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.79-86
• /
• 1996

A boundary element method which utilizes the fundamental solution in the half plane is developed to analyze the multi-layered elastic media. The objective of this study is to derive numerically the fundamental solutions and to apply those to the exterior multi-layered domain problems. To obtain numerical fundamental solutions of multi-layered structural system, the same number of solutions as that of layers in Fourier transform domain are employed. The numerical integration technique is used in order to inverse the Fourier transform solution to real domain. To verify the proposed boundary element method, two examples are treated: (1) a circular hole near the surface of a half plane; and (2) a circular cavity within one layer of four layered half plane.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.298-305
• /
• 2000

The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from - 20 degree to - 45 degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. Unlike common flow down, common flow up vortices moved toward the centerline as they developed and interacted strongly with each other but not with the boundary layer. Spanwise profiles of Stanton number were similar for ${\beta}=-20^{\circ}\;and\;-35^{\circ}$, but not similar for ${\beta}=-45^{\circ}$. The case of ${\beta}=-20^{\circ}\;and\;-35^{\circ}$ showed the two peak Stanton number, but the case of ${\beta}=-45^{\circ}$ showed the only one peak Stanton number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.409-419
• /
• 2013

Kinect released by Microsoft in November 2010 is a motion sensing camera in xbox360 and gives depth and color images. However, Kinect camera also generates holes and noise around object boundaries in the obtained images because it uses infrared pattern. Also, boundary flickering phenomenon occurs. Therefore, we propose a real-time virtual-view video synthesis algorithm which results in a high-quality virtual view by solving these problems. In the proposed algorithm, holes around the boundary are filled by using the joint bilateral filter. Color image is converted into intensity image and then flickering pixels are searched by analyzing the variation of intensity and depth images. Finally, boundary flickering phenomenon can be reduced by converting values of flickering pixels into the maximum pixel value of a previous depth image and virtual views are generated by applying 3D warping technique. Holes existing on regions that are not part of occlusion region are also filled with a center pixel value of the highest reliability block after the final block reliability is calculated by using a block based gradient searching algorithm with block reliability. The experimental results show that the proposed algorithm generated the virtual view image in real-time.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.255-262
• /
• 2002

A boundary sequence can be a good representation of arbitrary shapes, because it can represent them simply and precisely. However, boundary sequences have not been used as a representation of arbitrary shapes, because the pixel-based shape-features such as area, centroid, orientation, projection and so forth, could not be computed directly from them. In this paper, we show that the shape-features can be easily computed from the boundary sequences by introducing the cross-sections that are defined as vertical (or horizontal) line segments in a shape. A cross-section generation method is proposed, which generates cross-sections of the shape efficiently by tracing the boundary sequence of the shape once. Furthermore, a boundary sequence extraction method is also proposed, which generates a boundary sequence for each shape in a binary image automatically The proposed methods work well even if a shape has holes. Eventually, we show that a boundary sequence can be used effectively for representing arbitrary shapes.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.31-44
• /
• 2016

This paper presents a hole-filling algorithm based on extrapolating spatial-temporal background information used in view synthesis for free-viewpoint television. A new background codebook is constructed and updated in order to extract reliable temporal background information. In addition, an estimation of spatial local background values is conducted to discriminate an adaptive boundary between the background region and the foreground region as well as to update the information about the hole region. The holes then are filled by combining the spatial background information and the temporal background information. In addition, an exemplar-based inpainting technique is used to fill the rest of holes, in which a priority function using background-depth information is defined to determine the order in which the holes are filled. The experimental results demonstrated that the proposed algorithm outperformed the other comparative methods about average 0.3-0.6 dB, and that it synthesized satisfactory views regardless of video characteristics and type of hole region.

• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.811-831
• /
• 2015

This paper focuses on the strengthening methods used for improving the compression behaviors of perforated box-section walls as provided in the anchorage zones of steel pylons. Rectangular plates containing double-row continuous elliptical holes are investigated by employing the boundary condition of simple supporting on four edges in the out-of-plane direction of plate. Two types of strengthening stiffeners, named flat stiffener (FS) and longitudinal stiffener (LS), are considered. Uniaxial compression tests are first conducted for 18 specimens, of which 5 are unstrengthened plates and 13 are strengthened plates. The mechanical behaviors such as stress concentration, out-of-plane deformation, failure pattern, and elasto-plastic ultimate strength are experimentally investigated. Finite element (FE) models are also developed to predict the ultimate strengths of plates with various dimensions. The results of FE analysis are validated by test data. The influences of non-dimensional parameters including plate aspect ratio, hole spacing, hole width, stiffener slenderness ratio, as well as stiffener thickness on the ultimate strengths are illustrated on the basis of numerous parametric studies. Comparison of strengthening efficiency shows that the continuous longitudinal stiffener is the best strengthening method for such perforated plates. The simplified formulas used for estimating the compression strengths of strengthened plates are finally proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.