• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.386-390
• /
• 2007

The sintering behavior and mechanical property of Mo nanopowder was investigated as a function of various sintering condition. Mo oxide nanopowders were milled using a high energy ball-milling process. After the ball milling for 20h, the crystalline size of $MoO_3$ was about 20 nm. The $MoO_3$ nanopowders were reduced at the temperature of $800^{\circ}C$ without holding time in $H_2$ atmosphere. The sinterability of Mo nanopowder and commercial Mo powder was investigated by dilatometric analysis. Mo nanopowder and commercial Mo powder were sintered at $1200^{\circ}C$ for 1 hand $1500^{\circ}C$ for 3 h, respectively. In both specimens the measured relative density was about 95%. But the measured hardness values were 2.34 GPa for nanopowder and 1.87 GPa for commercial powder. Probably due to finer grain size of the sintered body prepared from Mo nanopowder than that prepared using commercial Mo powder. The mean grain sizes were measured to be about 1.4 mm and 6.2 mm, respectively.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.377-383
• /
• 2017

Microstructure, electric, and thermal properties of the Ta-Cu composite is evaluated for the application in electric contact materials. This material has the potential to be used in a medium for a high current range of current conditions, replacing Ag-MO, W, and WC containing materials. The optimized SPS process conditions are a temperature of $900^{\circ}C$ for a 5 min holding time under a 30 MPa mechanical pressure. Comparative research is carried out for the calculated and actual values of the thermal and electric properties. The range of actual thermal and electric properties of the Ta-Cu composite are 50~300 W/mk and 10~90 %IACS, respectively, according to the compositional change of the 90 to 10 wt% Ta-Cu system. The results related to the electric contact properties, suggest that less than 50 wt% of Ta compositions are possible in applications of electric contact materials.

• 열처리공학회지
• /
• 제17권6호
• /
• pp.346-355
• /
• 2004

The flame quenching process has been employed to modify the surfaces of commercial marine propeller material, aluminum bronze alloy (Cu-8.8Al-5Ni-5Fe), and the microstructure, hardness and wear properties of the flame-quenched layers have been studied. The thermal history was accurately monitored during the process with respect to both the designed maximum surface temperature and holding time. The XRD and EDX analyses have shown that at temperatures above $T_{\beta}$, the microstructure consisting of ${\alpha}+{\kappa}$ phases changed into the ${\alpha}+{\beta}^{\prime}$ martensite due to an eutectoid reaction of ${\alpha}+{\kappa}{\rightarrow}{\beta}$ and a martensitic transformation of ${\beta}{\rightarrow}{\beta}^{\prime}$. The ${\beta}^{\prime}$ martensite phase formed showed a face-centered cubic (FCC) crystal structure with the typical twinned structure. The hardness of the flame-quenched layer having the ${\alpha}+{\beta}^{\prime}$ structure was similar to that of the ${\alpha}+{\kappa}$ structure and depended sensitively on the size and distribution of hard ${\kappa}$ and ${\beta}^{\prime}$ phases with depth from the surface. As a result of the sliding wear test, the wear resistance of the flame-quenched layer was markedly enhanced with the formation of the ${\beta}^{\prime}$ martensite.

• 한국가정과교육학회지
• /
• 제5권1호
• /
• pp.61-85
• /
• 1993

Because of the specificity of subjects belong to middle school curriculum of Home Economics Education of function training is very important. but it pointed out that the existing standards are out-dated, and because of it , it incongruent to our realities. Therefore, whenever the curriculum o education and the national textbook are reorgrnized periodically, the reform of standards of educational materials & facilities must be followed by it. But in my opinion, in korean middle school, especially in Home Economics Education, educational facilities are not reformed at a proper time. Therefore to enhance the qualities of experimentation/practice of Home Economics Education, in the first place, the preparation for the given conditions of standards of educational materials & facilities are needed. But the educational facilities of Home Economics Education have many problem not only in the qualitative aspect but also in the quantitative aspect. And in addition to it, lost of educational facilities which cannot match contents of national textbook of Home Economics Education are exist. Therefore this thesis aims at examining comprehensively the problem of experimentation /practice of experimental materials & facilities of Home Economics Education connect with contents of Home Economics Education, holding several problems of experimentation/practice of Home Economics Education in middle school, grouping ; the principles and ways concerning the innovation experimental materials & facilities of Home Economics Education by which many teachers and students make sure of more efficient teaching/studying, and obtaining basic data which guarantee the ability of innovation concerning problems of the education of experimentation/practice of Home Economics Education. Method are : 1)grasp our educational realities with my original(question). 2)Integrate/analyse results of 1) 3)check the frequency, percentage with methods of X$^2$-test, T-test, and ‘One-way Analysis of Variances’. 4)suggest my own alternative proposal.

• 항공우주기술
• /
• 제3권1호
• /
• pp.170-178
• /
• 2004

본 논문은 KSR-III 개발경험을 토대로 모션테이블을 이용한 로켓 6자유도 실시간모의시험(HILS) 방안에 대해 다루고 있다. 모션테이블 HILS 시험을 통해, 3축 모션테이블의 동특성 지연에 따른 제어루프의 안정성을 판단하고 종합 HILS 시험을 위한 기초 자료를 제공하게 된다. 모션테이블 HILS 초기화 시험을 통해, 관성항법장치 초기정렬을 위한 초기자세 각 유지 알고리듬 시험, 발사시작 신호 모사를 통한 시각동기화 시험, 외부기록계를 이용한 실시간 조정시험 등을 수행하게 되고, 개루프 HILS 시험을 통해 정상 상태 비행 상황 및 슬로싱, 벤딩, TWD, 바람, 추력비정렬오차 등의 영향이 존재하는 비행 상황에 대한 모션테이블 운용 시험을 수행하게 되며, 최종적으로 모션테이블 자세각을 궤환루프의 입력으로 궤환시킨 폐루프 HILS를 통해 제어루프의 안정성 시험을 완료하게 된다.

• 과학기술학연구
• /
• 제6권2호
• /
• pp.103-129
• /
• 2006

최근 관심이 약화되고 있지만 정보격차는 정보사회 실현의 중요한 장애요인으로 지적되어 왔다. 정보격차에 대한 상반된 설명방식이라고 할 수 있는 낙관론과 비관론은 공통적으로 정보격차를 초래하는 객관적 조건에 초점을 맞추어 왔다. 그러나 접근 가능성은 객관적 조건뿐만 아니라 개인적 차원의 필요성에 대한 인식이나 의지와 같은 주관적 조건에 의해서도 달라질 수 있다는 사실은 경시되어 왔다. 인식이나 의지에 따르는 선택은 접속과 비접속을 결정하는 중요한 요인으로 작용할 수 있다. 미국의 경우 잠재적 이용자의 50% 이상이 스스로의 의지와 선택에 의해 인터넷을 사용하지 않는 것으로 알려져 있다. 우리나라의 경우에도 인터넷 사용자를 대상으로 한 조사에 따르면 '필요성을 느끼지 못해서'가 인터넷을 이용하지 않는 가장 중요한 이유로 나타났다. '이용할 시간이 없어서'라고 선택한 경우도 지속적으로 감소하고 있기는 하지만 상당한 비율을 차지하고 있으며 비 이용자들 중에서 차지하는 상대적 비중은 지속적으로 증가하고 있다. 선택에 의한 정보통신 기술의 비 이용자들을 정보격차의 범위에 포함시켜야 할 것인가의 문제가 있기는 하지만 정보사회로의 진행과정에서 선택에 의한 비 이용에 관심을 기울일 필요성은 분명한 것으로 보인다.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.142-155
• /
• 2000

본 논문에서는 VBR MPEG 비디오 트래픽의 마코프 모델 기반 트래픽 기술자에 대해 효과적인 policing 방법을 제안한다. VBR 비디오 스퀀스에 대해 보다 효율적이고 정확한 자원할당 및QoS 예측을 위해 장면기반 마코프 모델을 이용한 트래픽 기술자를 사용하여 망에 그 트래픽 특성를 기술하고, 망에서는 이를 근거로 제안된 새로운 policing 알고리즘을 이용하여 모니터링을 수행한다. 마코프 모델의 안정상태 천이확률의 감시를 위해 장면상태 마다 대표성을 갖는 두 가지 감시 파라미터(평균 체류시간 및 평균 회귀시간)를 정의하여 이를 누적 평균의 형태로 모니터링 한다. 또한 장면상태의 프레임 타입별 평균 셀 발생률도 누적 평균을 이용하여 안정상태 값과 비교된다. Transient 구간에서의 변이를 고려하여 지수함수를 이용한 bounding 방법을 제시하였고, 이는 실제 비디오 시퀀스에 잘 맞는 것을 알 수 있다. 실험결과 미코프 모델 기반 트래픽 기술자에 대해 제안된 방법은 MPEG 비디오와같은 매우 복잡한 트래픽에 대해서도 효과적인 모니터링이 가능하며 부적합 트래픽에 대해서도 좋은 감시성능을 보임을 알 수 있다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.153-160
• /
• 2015

This article is aimed to study the effects of resistance spot welding (RSW) on the lap joint properties between AA1100 aluminum alloy and SGACD zinc coated steel and its properties. The summarized experimental results are as follows. The summarized experimental results are as follows. The optimum welding parameters that produced maximum tensile shear strength of 2200 N was a welding current of 95 kA, a holding time of 10 cycles, and a welding pressure of 0.10 MPa. Increasing of welding current, increased the tensile shear strength of the joint and also increased the amount of aluminum dispersion at the joint interface. The lap joint of steel over the aluminum (Type I) showed the higher joint tensile shear strength than a lap joint of aluminum over the steel (Type II). The indentation depth and the ratio of the indentation depth to the plate thickness decreased when the welding current was increased in the type I lap joint and also decreased when the welding current was decreased in the type II lap joint. The interface structure showed the formation of the brittle $FeAl_3$ intermetallic compound that deteriorated the joint strength.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.631-637
• /
• 2013

Synthesis of sub-micron $2SnO{\cdot}(H_2O)$ powders by chemical reduction process was performed at room temperature as function of viscosity of methanol solution and molecular weight of PVP (polyvinylpyrrolidone). Tin(II) 2-ethylhexanoate and sodium borohydride were used as the tin precursor and the reducing agent, respectively. Simultaneous calcination and sintering processes were additionally performed by heating the $2SnO{\cdot}(H_2O)$ powders. In the synthesis of the $2SnO{\cdot}(H_2O)$ powders, it was possible to control the powder size using different combinations of the methanol solution viscosity and the PVP molecular weight. The molecular weight of PVP particularly influenced the size of the synthesized $2SnO{\cdot}(H_2O)$ powders. A holding time of 1 hr in air at $500^{\circ}C$ sufficiently transformed the $2SnO{\cdot}(H_2O)$ into $SnO_2$ phase; however, most of the PVP (molecular weight: 1,300,000) surface-capped powders decomposed and was removed after heating for 1 h at $700^{\circ}C$. Hence, heating for 1 h at $500^{\circ}C$ made a porous $SnO_2$ film containing residual PVP, whereas dense $SnO_2$ films with no significant amount of PVP formed after heating for 1 h at $700^{\circ}C$.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.465-473
• /
• 2020

For surface hardening of a continuous casting mold component, a fundamental metallurgical investigation on dissimilar laser clads (Cu-NiCrBSi) is performed. In particular, variation behavior of microstructures and mechanical properties (hardness and wear resistance) of dissimilar clads during long-term service is clarified by performing high-temperature post-clad heat treatment (temperature range: 500 ~ 1,000 ℃ and isothermal holding time: 20 ~ 500 min). The microstructures of clad metals (as-clads) consist of fine dendrite morphologies and severe microsegregations of the alloying elements (Cr and Si); substrate material (Cu) is clearly confirmed. During the post-clad heat treatment, the microsegregations are totally homogenized, and secondary phases (Cr-based borides and carbides) precipitated during the short-term heat treatment are also almost dissolved, especially at the heat treatment conditions of 950 ℃ for 500 min. Owing to these microstructural homogenization behaviors, an opposite tendency of the surface mechanical properties can be confirmed. In other words, the wear resistance (wear rate) improves from 4.1 × 10^-2 ㎣/Nm (as-clad condition) to 1.4 × 10^-2 ㎣/Nm (heat-treated at 950 ℃ for 500 min), whereas the hardness decreases from 453 HV (as-clad condition) to 142 HV (heat-treated at 950 ℃ for 500 min).