• 소성∙가공
• /
• 제32권5호
• /
• pp.276-286
• /
• 2023

The field of sheet metal forming using press technology has become essential in modern mass production systems. Draw bead is often used to enhance formability. However, optimal draw bead design often requires excessive time and cost due to iterative experimentation and sometimes results in some defects. Given these challenges, there is a need to enhance formability by introducing segmented blank holders without draw beads. In this paper, the feasibility of a localized holding strategy using segmented blank holders is evaluated without the use of draw beads. The possibility for improving the formability was evaluated by utilizing a combination of the forming limit diagram and the wrinkle pattern-based defect indicators. Artificial neural networks were used for predicting defect indicators corresponding to arbitrary input holding forces and the NSGA-II optimization algorithm is used to find optimum blank holder forces yielding better defect indicators than the original process with drawbeads. Using optimum holding forces obtained from the proposed procedure, the stamping process with the segmented blank holders can yield better formability than the conventional process with drawbeads.

• 한국콘텐츠학회논문지
• /
• 제14권11호
• /
• pp.378-388
• /
• 2014

연구목적은 국소마취 환자의 수술시 불안과 통증을 경감시키기 위해 손잡아주기, 내관지압의 간호중재를 통해 그 효과를 검증하고자 시도되었다. 연구기간은 2013년 7월부터 10월까지이며 연구대상은 H대학교 병원에서 국소마취를 통해 외래수술을 시행한 총 78명을 대상으로 하였다. 연구 설계는 비동등성대조군 사전사후 시차설계로 이루어졌다. 실험군1, 실험군2, 대조군 각 26명이었으며 외래수술환자를 대상으로 실험군1은 손잡아주기, 실험군2는 내관지압 간호중재를 실시하였다. 연구결과 세 군 간의 사전 동질성은 검증되었으며 간호중재 후 불안, 간호중재 후 통증이 실험군1, 실험군2에서 대조군보다 유의미하게 차이가 있었다. 결과에 근거하여 수술시 불안과 통증감소의 효과를 나타낸 손잡아주기와 내관지압의 효과가 시간과 경제적 측면에서 수술실에서 쉽게 접근할 수 있는 간호중재로 활용하는 것이 필요하다.

• 한국식품조리과학회지
• /
• 제30권5호
• /
• pp.526-530
• /
• 2014

본 연구에서는 선식 제조 중 원료의 로스팅 공정이 관능적으로 최종 제품의 분산성을 낮추고 점성을 증가시킨 원인을 기계적 물성 측정을 통해 규명하고자 하였다. 현미를 로스팅하여 첨가한 선식들은 대조군에 비해 입자크기가 증가하였으며, 이러한 변화는 주로 직경 $1{\mu}m$ 이상의 영역에서 관찰되었다. 로스팅이 선식 분말의 분산성 자체를 감소시키기 보다는 침강속도를 증가시킴으로써, 분산 상태를 유지하는 시간을 단축시킨 것으로 생각된다. 현미를 증자 건조하는 동안 전분 입자의 붕괴와 수분 증발로 다공성 구조가 형성되므로, 선식을 물과 혼합하면 물이 빠른 속도로 흡수된 것으로 사료된다. 특히, 로스팅한 선식들은 대조군보다 물 결합력이 더 높아, 흐름을 유발하는 데 소요되는 힘 또한 증가되어, 대조군에 비해 점도가 높아진 것으로 해석되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• 열처리공학회지
• /
• 제29권5호
• /
• pp.220-226
• /
• 2016

The mechanical properties of Ti-6Al-4V can be improved by microstructural control through the heat treatment in ${\alpha}+{\beta}$ region. The heat treatment was carried out with a variety of heat treatment temperatures and holding times to find the optimized heat treatment conditions and it was analyzed by linking the microstructural characteristics and mechanical properties. The part of ${\beta}$ phase with $10{\pm}2wt%$ vanadium was transformed into ${\alpha}^{{\prime}{\prime}}$ martensite phase after quenched, so the hardness and tensile properties were decreased below $900^{\circ}C$. The higher the heat treatment temperature is, the smaller is the vanadium-rich region, which leads to transformation into hcp ${\alpha}^{\prime}$ martensite above $900^{\circ}C$. The hardness and tensile properties were improved due to the hard ${\alpha}^{\prime}$ martensite. As the holding times were longer, the hardness and tensile properties decreased below $900^{\circ}C$ because of the softening effect by the grain growth. When varying the holding times above $900^{\circ}C$, the change of mechanical properties was slight because the softening effect of grain growth and the strengthening effect of ${\alpha}^{\prime}$ phase were counteractive. Therefore, the best conditions of heat treatment, which is in the range of $920{\sim}960^{\circ}C$, 40 min, WQ, can effectively improve the mechanical properties of Ti-6Al-4V.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.87-96
• /
• 2002

자가굴착식 프레셔미터를 이용한 변형률 유지 시험은 점성토 지반의 수평방향 압밀계수를 추정하는데 있어 효과적으로 사용되고 있다. Clarke등(1979)이 제시한 일반적인 해석 방법은 여러 가지 단순화한 가정으로 인해 압밀계수산정에 문제점을 내포하고 있다. 따라서, 본 논문에서는 실제 시험 과정 및 조건들을 최대한 반영하기 위하여 프레셔미터 시험기의 유한한 길이, 계파시의 부분배수, 소산시험 시작시의 공동 변형률 등의 여러 가지 해석 조건들이 초기 과잉간극수압의 분포 및 소산 거동에 미치는 영향을 고려한 유한요소해석을 수행하였다. 그 결과, 수평방향 압밀계수를 추정하는데 필요한 50% 압밀도에서의 시간계수를 제안하였고, 이를 국내 2개 현장에서 수행한 변형률 유지시험에 적용하여 압밀계수를 산정하고, 다른 현장 시험 및 실내시험 결과와 비교.분석하여 그 적용성을 확인하였다.

• 한국축산식품학회지
• /
• 제33권4호
• /
• pp.474-480
• /
• 2013

This study was performed to investigate the effects of high pressure/high temperature (HPHT) treatment on the recovery efficiency and characteristics of porcine placenta hydrolysates. The placenta hydrolysates were characterized by solubility, free amino acid contents, gel electrophoresis, gel permeation chromatography (GPC) and amino acid composition. Placenta was treated at 37.5 MPa of pressure combined with various temperatures (150, 170, and $200^{\circ}C$) or various holding times (0, 30, and 60 min at $170^{\circ}C$). Insoluble raw placenta collagen was partially solubilized (> 60% solubility) by the HPHT treatment. Free amino group content of placenta collagen was increased from 0.1 mM/g collagen to > 0.3 mM/g collagen after HPHT treatment, reflecting partial hydrolysis of collagen. The molecular weight ($M_w$) distribution showed evidence of collagen hydrolysis by shifting of $M_w$ peaks toward low molecular weight when treated temperature or holding time was increased. Alanine (Ala), glycine (Gly), hydroxyproline (Hyp), and proline (Pro) contents increased after the HPHT treatments compared to a decrease in the others. In particular, the increase in Gly was obvious, followed by Hyp and Pro, reflecting that placenta hydrolysates were mainly composed of these amino acids. However, increasing temperature or holding time hardly affected the amino acid compositions. These results indicate that the HPHT treatment is advantageous to hydrolyze collagen derived from animal by-products.

• 한국융합학회논문지
• /
• 제11권12호
• /
• pp.199-205
• /
• 2020

오늘날 부동산 특히 주택과 관련한 많은 정부정책이 발표됨에 따라 주택시장에서의 가격에 대한 관심이 매우 높아졌다. 이에 본 연구에서는 소득의 불안정성과 부동산가격변동에 대한 심리상태와 부동산보유비중의 조정의향 간의 관련성을 분석하여 정부정책의 실효가능성을 살펴보고자 한다. 먼저 선행연구 검토를 통해 주요 변수를 추출하고 설문조사를 통해 자료를 수집하여 경로분석을 실시하였다. 분석결과 현재의 소득의 불안정성은 부동산가격변동에 대한 태도에 음(-)의 영향을, 부동산보유비율조정의향에는 양(+)의 영향을 미쳤으나, 부동산가격변동에 대한 태도가 부동산보유비율조정의향에는 통계적으로 유의한 영향을 미치지 않았다. 이에 연령대와 부양가족 수를 각각 2분하여 집단간 차이분석을 실시하였으며, 분석결과 부동산보유비중 의사결정은 연령대가 높은집단과 부양가족수가 많은집단에서 소득불안정성과 부동산가격변화에 대한 태도에 의해 영향을 받아 집단 간 차이를 보였다. 본 분석 결과는 정부의 부동산 정책 수립방향 설정과 각 가계의 부동산 관련 의사결정에 기초자료로 활용하는데 도움이 될 것이다. 한편 본 연구는 횡단면분석만을 실시한 한계점을 갖고 있으며 향후에는 시계열적 변화와 지역간 인식의 차이 등을 분석하고자 한다.

• 유통과학연구
• /
• 제17권3호
• /
• pp.69-83
• /
• 2019

Purpose - This paper investigates the long term impact of RFID investment on firm value in Korea. We wand to find out why the long term performance of some firm's RFID investment is better than others. To understand the dynamics of the long term returns from RFID investment announcements, we divide our events into groups for each of the independent firm characteristic variable such as investment time period, kind of markets, industries, solvency and growth potential. We composed portfolios based on the RFID investment announcement date for each group and evaluate the monthly abnormal excess returns. Research design, data, and methodology - Based on these calendar-time portfolios, we measure the long term returns from 86 RFID investment announcements of 46 firms from 2003 to 2017. We construct the calendar-time portfolio for 3, 6, 9, 12 months of holding periods. Using the weighted least squares method, we regress the raw monthly returns of the portfolios on the Fama-French model and Carhart(1997) model. As a result, we can get the estimated risk adjusted mean monthly abnormal excess return α_P for each of the calendar-time portfolio. Results - We found that early adopters, large firms, non-manufacturing firms have very significant excess returns. We also found modestly significant excess returns for financially stable firms and slow growing firms. Put together, top managers of the firms which plan to invest RFID should understand the strategic role of RFID adoption and the generalized business process of distribution information technology investment in Korea. Moreover, the findings of this paper provide useful trading strategies to the managers of large funds who are considering on investing in RFID adopting firms. Conclusions - Put together, the results of this paper give us a new insight into how the RFID and IT technology in general and other characteristic factors' interactions affect the long term performance of firms. Using the unbiased estimates of long term returns of the calendar-time portfolios, this paper extends the understandings on short term impact of RFID adoption of existing studies. This paper also extends the current understandings of firm characteristics that affect the long term performance of RFID adopting firms.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.405-412
• /
• 1995

In order to estimate the wettability of the borosilicate glasses with different composition on the noble metals of gold and silver, the measurements of the contact angle between the solid and the liquid were made at various temperatures and holding times using the sessil-drop method. The wetting behavior and the adhesion of the phases were strongly influenced by the thermal or the physical characteristics of the materials. The dependence of wetting angle ($\theta$) on the holding time (t) could be represented by the relation of $\theta$=a.tb, whereby the wettability of the systems was quantitatively compared. Also with increasing content of borosilicate glass in the glass-gold matrix composite, the tensile strength was decreased whereas the elastic modulus was increased.