• Clinics in Shoulder and Elbow
• /
• v.8 no.2
• /
• pp.117-121
• /
• 2005

A secure slip knot is very important in the arthroscopic surgery of the shoulder joint. The new 'Hallym Slider', developed by the first author(KCN), has the properties of being a simple sliding and one-way locking knot. This technique can be performed alone without an assistant and has no accidental premature locking during the knot tying. The initial slip knot determines the adequacy of tissue approximation and consequent healing. The 'Hallym Slider' has excellent initial holding capacity, maintaining tension on soft tissue while additional half-hitches are being tied. It locks readily, it takes less time to tie than numerous square knots, and it is not as bulky as other knots. Therefore, we introduce this new sliding and one-way locking knot during the arthroscpic surgery of shoulder.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.2
• /
• pp.240-246
• /
• 2010

This study aimed to determine microbiological quality on vegetable salad used dressing added with Prunus mume extracts. For this study, Dressing were blended with Prunus mume extracts to different concentrations of 0, 10, and 20%. Microbiological effects of vegetable salad used dressing added with Prunus mume extracts were assessed during production process by measuring process time, temperature, pH and Aw and determining total plate counts and coliforms. Effects of vegetable salad used dressing added with Prunus mume extracts on total plate counts and coliforms were observed during holding at 3, $25{\pm}1^{\circ}C$ for 12 hours. Dressing added with Prunus mume extracts improved the microbiological quality and showed antibacterial properties when they are added to vegetable salad.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.6
• /
• pp.675-682
• /
• 2005

This study was aimed to determine microbiological quality by adding green tea extracts to chicken meat salad. For this study, Chicken meat salad were prepared with two production method. (method 1: addition of green tea extracts to boiling phase, method 2: addition of green tea extracts to salad dressing) Microbiological effects of green tea extracts were assessed during production process by measuring process time, temperature, pH and Aw and determining total plate counts and coliforms. Effects of green tea extracts on total plate counts and coliforms were observed during holding at 3, 10, $25{\pm}1^{\circ}C$ for 12 hours. Green tea extracts improved the microbiological quality and showed antibacterial properties when they are added to chicken meat salad.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.68-73
• /
• 2002

In this study, a new type of Aliquat 336/PVC membrane has been made for extraction experiments. This new membrane is capable of holding more Aliquat 336 than previously developed extraction membranes, hence overcoming a major problem that has confronted many researchers for a long time. The new membrane has been used try investigate the rate of extraction fur the Cd(II) ion in 2.0 M HCI solution and the effect of membrane thickness on the rate of extraction. The experimental results have shown this new membrane has a promising future in relevant industrial applications. A new method is also used in this study to qualitatively identify the oily substance on the surface of membrane after the extraction experiment was completed. This oily substance has been found to be Aliquat 336.

• The Journal of the Korean dental association
• /
• v.45 no.4 s.455
• /
• pp.238-247
• /
• 2007

Traction of impacted tooth often requires patient compliance to place elastics to surgically exposed impacted tooth. It can be very difficult and time-consuming. The aim of this article was to describe an impacted tooth tractor, Moon's appliance, which was modified from the Nance holding arch appliance. Moon's appliance eliminates patient compliance and generates a light continuous force. We achieved the desired treatment results for impacted tooth using this appliance. This new fixed appliance can be a reasonable alternative to conventional appliances.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.48-50
• /
• 2005

Advanced hard materials based on diamond are in common use. In this study our main goal was employed to analyze, the mechanisms for the rich phases and chromium carbide, interface of a diamond grits brazed to a Ni-based brazing filler metal matrix. When Ni-7Cr-3Fe-3B-4Si (wt. %) was utilized as the brazing alloy, an isothermal holding resulted in the various products(Ni-rich/Cr-rich domains, carbide). According to these results, the chemical compounds and chromium carbides products is considered to play an important role in brazing temperature and time. Especially chromium carbide has an influence on brazing junction properties.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.66-70
• /
• 2014

In Ti active brazing of YSZ to STS 430 using Ag-Cu Filler Metal, the effect of Ti contents on the shear bonding strength were investigated together with the effect of brazing temperature and holding time. The addition of Ti in Ag-Cu Filler Metal increased the bonding strength up to 4.68% Ti, followed by the decrease with further addition. This seems to be caused by formation of TixOy at the reaction layer. Brazing temperature was optimized at $960^{\circ}C$ among a given temperature ranges. The addion of Sn to Ag-Cu filler metal brought the decrease of its melting temperature its melting temperature without a significant decrease of bonging strength.

• Korean Management Science Review
• /
• v.31 no.3
• /
• pp.13-26
• /
• 2014

This paper considers an integrated one-vendor multi-buyer production-inventory model where the vendor manufactures multiple products in lot at their associated finite production rates. In the model, it is allowed for each product to be shipped in lot to the buyers even before the whole product production is not completed yet. Each product lot is dispatched to the associated buyer in a number of shipments. The buyers consume their products at fixed rates. The objective is to the production and shipment schedules in the integrated system, which minimizes the total cost per unit time. The total cost consists of production setup cost, inventory holding cost and shipment cost. For the model, an iterative optimal solution procedure with shipment consolidation policy incorporated. It is then tested through numerical experiments to show how efficient and effective the shipment consolidation policy is.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.1
• /
• pp.47-52
• /
• 2002

Intermetallic compound on the soldered interface plays important role on the bondability and mechanical properties of soldered joint. The formation of intermetallic compounds are influenced by many factors such as temperature, holding time, base metals and so on. On this study the effect of number of reflow times on the intermetallic growth was investigated. For the experimental materials, Sn-3.5Ag-0.7Cu solder ball of 0.3mm diameter and RMA-type flux were used. Thickness of intermetallic compound of solder ball by 2nd reflow showed nearly 60% higher than that of 1st reflow, and shear strength showed 10% higher value. Thickness and shear strength according to the position of interface such as upper side or lower side between two substrates were also investigated.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.943-952
• /
• 1991

Lead zirconate titanate(PZT) powders and thin films were prepared from an alkoxide-based solution by sol-gel method. Gelation of synthesized complex solutions, pyrolysis and crystallization behaviors of the dried powder were studied in accordance with a water content and a catalyst. PZT thin films were formed by spin-casting method on silicon and platinum substrates, and characterized. Ester produced from the reactions was completely removed when drying of the gel was finished. Pyrolysis property of the dried PZT gels were changed in order water content, class of catalyst, and quantity of catalyst. Crystalline Pb phase was transiently formed near 250$^{\circ}C$. Basic catalyst is good additive for a formation of perovskite phase in the films, and acidic catalyst for a densified film structure. By the analysis of RBS, Pb element in the PZT films were diffused into silicon substrate, and the pores, may be produced due to local densification around some grains in the films, make an origin of fault in microstructure when holding time goes to be longer at 700$^{\circ}C$.