• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.5-14
• /
• 1999

Glass ceramics for dental crown prosthesis were prepared by crystallization of CaO-MgO-SiO2-$P_2O_5-TiO_2$ glasses. Their crystallization behaviors have been investigated as a function of heattreatment temperature, holding time and chemical composition in relation to mechinical properties. Crystallization peak temperatures were determined by differential thermal analysis(DTA). Crystalline phases and mircostructures of heat-treated sample were determined by the means of powder X-ray diffraction(XRD) and scanning electron microscopy(SEM). The final crystalline phase assemblages and the microstructures of the samples were found to be dependent on glass compositions, heattreatment temperature, and holding time. 1st crystallization peak temperature(TP), affected strongly by apatite, was found to be increased or decreased. From the experiment, the following results were obtained : 1. The crystallization peak temperature($T_P$) formed by apatite increased until adding up to 9wt% $TiO_2$ to base glass composition, then decreased above that. 2. Apatite($Ca_{10}P_6O_{25}$), whitlockite(${\beta}-3CaO-P_2O_5$), $\beta$-wollastonite($CaSiO_3$), magnesium tianate($MaTiO_3$) and diopside(CaO-MgO-$2SiO_2$) crystal phase were precipitated in MgO-CaO-$SiO_2-TiO_2-P_2O_5$ glass system containing 9wt% and 11wt% of $TiO_2$ 3. Vickers hardness of samples increased with increasing heat-treatment temperature and Vickers hardness of S415T9 samples heat-treated at 1075 was approxi-mately 813Kg $mm^{-2}$ as maximum value. 4. Vickers hardness of samples increased due to precipitation of apatite, whitlockite, $\beta$-wollastonite, magnesium titanate, and diopside crystal phases within glass matrix.

• Journal of the Korean Home Economics Association
• /
• v.40 no.4
• /
• pp.85-103
• /
• 2002

The purpose of this study is to examine determinant to purchase decisions by consumers using the home shopping of cable TV. For the purpose accomplishment, this researcher surveyed demographic characteristics of cable TV users to determine what differences in types of goods purchased by the users were made in accordance with the characteristics. Findings from the study may be reflected in bisiness policies seeking the fulfillment of consumer needs, and be used as a basic information for the establishment of consumer policies pursuing increased qualities of consumption life by providing information on goods shown through the of home shopping on cable TV. The result of the study can be summarized as follow. First, purchased goods were greatly different in their types depending on demographic characteristics of consumers such as gender, marital status, age, educational backgrounds, income and jobs. Second, experiential characteristics of cable TV users including holding or non-holding credit cards, main channels used, the main time of watching cable TV and purchase frequency per year contributed to differences in types of purchased goods. Third, factors influencing purchase decisions were somewhat different according to types of goods. However, previous purchase experiences were most influential irrespective of the types. The result as described so far suggests that previous purchase experiences by consumers raised their chances of repurchase by removing possible risks perceived by consumers. Based on the result as above, the researcher would make the following conclusion. First. companies operating the of home shopping on cable TV should increase satisfaction by consumers by providing reliable goods and information to them. In this sense, those companies need to establish marketing strategies that vary according to demographic characteristics of consumers and at the same time provide product information necessary for fulfilling consumers' requirements. Second, consumers should be moderate in the use of credit cards to avoid unplanned purchases via home shopping on cable TV and have some knowledge to solve problems related to goods and to the use of credit cards.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.449-454
• /
• 1998

It is well known that new tissue or blood vessel is grown into a porous calcium phosphate ceramics used as a bone graft substitute due to their excellent biocompatibility. In this study, the most chemically stable porous $\beta$-crystalline form in various forms of calcium metaphosphate, Ca(PO$_3$)$_2$is prepared by the controlled thermolysis of monocalcium phosphate, Ca(H$_2$PO$_4$)$_2$.The diameter of cylindrical pores formed during cooling was controlled by a holding time at the melting point of a monocalcium phosphate and by the change of a crystallization temperature, to obtain the most appropriate size (about 200$\mu$m) of pores for the application of bone substitutes and matricuts. It was observed that the increasing holding time at the melting point of monocalcium phosphate results in the decreases of cylindrical pore sizes.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2012

Densified fuels from biomass are widely used in North America and Europe as a regenerable and clean bioenergy. In this study, the fuel characteristics and densification characteristics of Japanese larch and Hyunsasi poplar were studied using a piston-type briquetting machine. The effects of pressure, pressure holding time, species, and particle size on briquette characteristics were studied. At room temperature, the highly densified briquettes of Japanese larch and Hyunsasi poplar can be produced at a compression pressure of 110~170 MPa. The produced briquettes have densities between 0.66 and 0.94 g/$cm^3$ after 28 days of storage at room temperature. The optimum pressure holding time was found to be 12 seconds. There is a linear increase in pressure with increase in density. The densities of briquettes from Japanese larch were higher than those of briquettes from Hyunsasi poplar. Also, the coarser particle size resulted in higher densities in briquettes than the finer particle size.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.139-150
• /
• 2019

This study aimed to determine the suitable point of sale and consumption of different quality grade (QG) Hanwoo short loin during aging period, based on physicochemical, sensory, and microbiological quality. Short loins obtained from the carcasses of 13 Hanwoo steers and 2 bulls with 5 different QGs (1++, 1+, 1, 2, and 3) were analyzed over 28 d. QG and aging time had significant effect on water holding capacity, color, shear force, total volatile basic nitrogen (TVBN) content, and sensory traits. Higher QG groups generally exhibited a lower shear force, nucleotide content, and water holding capacity, and higher $L^*$, $a^*$, and $b^*$ values. Acceptable tenderness (shear force <5.4 kg) in QG 1++, 1+, 1, and 2 was achieved on days 7, 14, 16, and 18, respectively, and QG 3 showed a shear force of 6.8 kg, even after 28 d. Regardless of QG, TVBN content below threshold levels (20-30 mg%) was observed throughout the 28 d aging period, while total plate counts above 7 Log CFU/g were seen at 21 d. In conclusion, it is recommended that Hanwoo beef with QG 1++, 1+, and intermediate QG (1 and 2) should be sold or consumed between 7 and 21, 14 and 21, 16 and 21 d, respectively. Beef with QG 3 should be sold or consumed within 21 d, based on microbial growth, even though it has not achieved desirable tenderness. For this reason, an additional tenderizing process is recommended before this beef is ready for consumption.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.358-364
• /
• 2018

An isotropic pitch precursor for fabricating carbon fibres was prepared by co-carbonization of ethylene bottom oil(EBO) and polyvinyl chloride (PVC). Various pre-treatments of EBO and PVC, and a high heating rate of $3^{\circ}C/min$ with no holding time, were evaluated for their effects on the oxidative stabilization process and the mechanical stability of the resulting fibres. Our stabilization process enhanced the volatilization, oxidative reaction and decomposition properties of the precursor pitch, while the addition of PVC both decreased the onset time and accelerated the oxidative reaction. Aliphatic carbon groups played a critical role in stabilization. Microstructural characterization indicated that these were first oxidised to carbon-oxygen single bonds and then converted to carbon-oxygen double bonds. Due to the higher heating rate and lack of a holding step during processing,the resulting thermoplastic fibers did not completely convert to thermoset materials, allowing partially melted, adjacent fibres to fuse. Fiber surfaces were smooth and homogeneous. Of the various methods evaluated herein, carbon fibers derived from pressure-treated EBO and PVC exhibited the highest tensile strength. This work shows that enhancing the naphthenic component of a pitch precursor through the co-carbonization of pre-treated EBO with PVC improves the oxidative properties of the resulting carbon fibers.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.271-279
• /
• 2012

9-12% Cr steels have been used in thermal power plants which repeat start and stop operations. Major factors of fatigue life are temperature, frequency, stress ratio, holding time, microstructure, and environment. Normally, fatigue life decreases at high temperature, low frequency, high stress ratio, and long holding time conditions. A Mod.9Cr-1Mo steel, called G91, was developed at ORNL (Oak Ridge National Laboratory, USA) and was adopted as a high-temperature structural material in the ASME Code in 2004. However, its low-cycle fatigue and fatigue crack growth characteristics have been rarely studied. In this work, we have investigated the low-cycle fatigue crack growth behaviors of G91 steel under various test conditions in terms of temperature and stress ratio. As temperature and stress ratio increase, the crack growth rate becomes faster and striation distance also increases. On the other hand, the number of branch cracks decreases.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.5
• /
• pp.1390-1411
• /
• 2024

Underwater Wireless Sensors Networks (UWSNs) are deployed in remotely monitored environment such as water level monitoring, ocean current identification, oil detection, habitat monitoring and numerous military applications. Providing scalable and efficient routing is very challenging in UWSNs due to the harsh underwater environment. The biggest difficulties are the nodes inherent movement due to water current, long delay in data transmission, low bandwidth of the acoustic signal, high error rate and energy scarcity in battery powered nodes. Many routing protocols have been proposed to solve the aforementioned problems. There are three broad categories of routing protocols namely depth based, energy based and vector-based routing. Vector Based Forwarding protocols perform routing through virtual pipeline by defining their radius which give proper direction to packets communication. We proposed a routing protocol termed as Path-Oriented Energy Scaled Expanded Vector Based Forwarding (PESEVBF). PESEVBF takes into account all parameters; holding time, the source nodes packets routing path and void holes creation on the second hop; PESEVBF not only considers the packet upward advancement but also focus on density of the forwarded nodes in terms of number of potential forwarding and suppressed nodes for path selection. Node selection in resultant holding time is based on minimum Path Factor (PF) value. Moreover, the suppressed node will be selected for packet forwarding to avoid the void holes occurrences on the second hop. Performance of PESEVBF is compared with other routing protocols using matrices such as energy consumption, packet delivery ratio, packets dropping ratio and duplicate packets creation indicating considerable performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.737-748
• /
• 2005

Two flexible admission control schemes for integrated voice and stream-type data services are proposed in DS-CDMA systems. Most Previous studies on admission control have focused on integration of short, bursty Packet-type data services and conventional voice services. However, stream-type data services with a relatively long service holding time are expected to be a considerable portion of data traffic in future generation cellular systems. Scheme I is a basic scheme that accommodates both voice and data services with full bandwidth. However, voice services are given priority over data services using the duration difference between the holding times for these services. Scheme ll uses a different method to efficiently give priority to voice services over stream-type data services. An additional interference margin for voice services is provided by suppressing interference from stream-type data services according to voice access requests and a varying interference status. Performance of the two schemes is evaluated by developing Markovian models. Numerical results show that the voice capacity is highly sensitive to the service holding time of data services while the performance measures of data services are not highly sensitive. Scheme H is a significant improvement over Scheme I for accommodating voice and stream-type data services