• Transactions of Materials Processing
• /
• v.32 no.5
• /
• pp.276-286
• /
• 2023

The field of sheet metal forming using press technology has become essential in modern mass production systems. Draw bead is often used to enhance formability. However, optimal draw bead design often requires excessive time and cost due to iterative experimentation and sometimes results in some defects. Given these challenges, there is a need to enhance formability by introducing segmented blank holders without draw beads. In this paper, the feasibility of a localized holding strategy using segmented blank holders is evaluated without the use of draw beads. The possibility for improving the formability was evaluated by utilizing a combination of the forming limit diagram and the wrinkle pattern-based defect indicators. Artificial neural networks were used for predicting defect indicators corresponding to arbitrary input holding forces and the NSGA-II optimization algorithm is used to find optimum blank holder forces yielding better defect indicators than the original process with drawbeads. Using optimum holding forces obtained from the proposed procedure, the stamping process with the segmented blank holders can yield better formability than the conventional process with drawbeads.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.378-388
• /
• 2014

This research is to figure out the influence of hand holding and Nea-Guan acupressure to anxiety and pain that local anesthesia patients feel in out patient operation room. Non equivalent control group pretest-posttest time series design was adopted and the data had been collected from Jul. to Oct. 2013. Total 78 local anesthesia patients of out patient operation room in the H Hospital were allotted by control group, experimental group 1( hand holding) and experimental group 2(Nea-Guan acupressure) which consisted of 26 patients each. Hand holding and Nea-Guan acupressure in this research was validated to relieve the anxiety and the pain of the local anesthesia patients in operation and can be adopted as an efficacious nursing interventions.

• Korean journal of food and cookery science
• /
• v.30 no.5
• /
• pp.526-530
• /
• 2014

The effect of roasting on particle size distribution, water-holding capacity, and viscosity of sunsik was investigated in this study using non-roasted one as control. Roasting increased the size of particles in sunsik, in particular, particles larger than $1{\mu}m$ in diameter, indicating that roasted sunsik is likely to sediment faster, thereby decreasing the time to maintain dispersibility when mixing with water. Roasting also increased the water-holding capacity of sunsik, indicating that polymerization occurred greater than a pyrolysis during roasting, leading to increased viscosity in roasted sunsik. These results indicate that the roasting affected the dispersibility and viscosity of sunsik by increasing particle size and water-holding capacity, respectively.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.5
• /
• pp.220-226
• /
• 2016

The mechanical properties of Ti-6Al-4V can be improved by microstructural control through the heat treatment in ${\alpha}+{\beta}$ region. The heat treatment was carried out with a variety of heat treatment temperatures and holding times to find the optimized heat treatment conditions and it was analyzed by linking the microstructural characteristics and mechanical properties. The part of ${\beta}$ phase with $10{\pm}2wt%$ vanadium was transformed into ${\alpha}^{{\prime}{\prime}}$ martensite phase after quenched, so the hardness and tensile properties were decreased below $900^{\circ}C$. The higher the heat treatment temperature is, the smaller is the vanadium-rich region, which leads to transformation into hcp ${\alpha}^{\prime}$ martensite above $900^{\circ}C$. The hardness and tensile properties were improved due to the hard ${\alpha}^{\prime}$ martensite. As the holding times were longer, the hardness and tensile properties decreased below $900^{\circ}C$ because of the softening effect by the grain growth. When varying the holding times above $900^{\circ}C$, the change of mechanical properties was slight because the softening effect of grain growth and the strengthening effect of ${\alpha}^{\prime}$ phase were counteractive. Therefore, the best conditions of heat treatment, which is in the range of $920{\sim}960^{\circ}C$, 40 min, WQ, can effectively improve the mechanical properties of Ti-6Al-4V.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.87-96
• /
• 2002

The strain holding test(SHT) or the sell-boring pressuremeter test(SBPT) has been effectively utilized to determine the horizontal coefficient of consolidation$(c_h)$ of clayey soils. However, a commonly used procedure proposed by Clarke et al.(1979) can lead to an erroneous estimation of $(c_h)$ because of its simplified assumptions. This paper deals with numerical analyses based on realistic test conditions of the generally accepted testing procedure, and .using the most commonly used type of pressuremeter. The effects of pressuremeter geometry, partial drainage during cavity expansion, and the cavity strain level for the holding test are investigated with the radial distributions of the initial excess pore pressure and their dissipation rate. Based on the results of the numerical analyses, the curve of the time factor for the 50% degree of consolidation($T_{50}$) needed to estimate $(c_h)$ is proposed. Comparisons are made between $(c_h)$ values estimated from the SHT or the SBPT and those obtained from other in situ and laboratory tests performed at two sites in Korea. These results suggest the improved capability of the $T_{50}$ curve proposed herein.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.474-480
• /
• 2013

This study was performed to investigate the effects of high pressure/high temperature (HPHT) treatment on the recovery efficiency and characteristics of porcine placenta hydrolysates. The placenta hydrolysates were characterized by solubility, free amino acid contents, gel electrophoresis, gel permeation chromatography (GPC) and amino acid composition. Placenta was treated at 37.5 MPa of pressure combined with various temperatures (150, 170, and $200^{\circ}C$) or various holding times (0, 30, and 60 min at $170^{\circ}C$). Insoluble raw placenta collagen was partially solubilized (> 60% solubility) by the HPHT treatment. Free amino group content of placenta collagen was increased from 0.1 mM/g collagen to > 0.3 mM/g collagen after HPHT treatment, reflecting partial hydrolysis of collagen. The molecular weight ($M_w$) distribution showed evidence of collagen hydrolysis by shifting of $M_w$ peaks toward low molecular weight when treated temperature or holding time was increased. Alanine (Ala), glycine (Gly), hydroxyproline (Hyp), and proline (Pro) contents increased after the HPHT treatments compared to a decrease in the others. In particular, the increase in Gly was obvious, followed by Hyp and Pro, reflecting that placenta hydrolysates were mainly composed of these amino acids. However, increasing temperature or holding time hardly affected the amino acid compositions. These results indicate that the HPHT treatment is advantageous to hydrolyze collagen derived from animal by-products.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.199-205
• /
• 2020

As many government policies have been announced today regarding real estate, especially housing, interest in prices in the housing market has increased significantly. In this study, I would like to present the direction of government policies by analyzing the relationship among income instability, the psychological condition of real estate price changes and willingness to adjust real estate holding ratio. First, major variables were extracted through the prior study review, and using a survey, data were collected and path analysis was conducted. According to the analysis, the current income instability had a negative impact on the psychological condition of real estate price changes, and a positive influence on the willingness to adjust real estate holding ratio, but the psychological condition of real estate price changes did not have a statistically significant impact on the willingness to adjust real estate holding ratio. Thus, the difference analysis was conducted between groups by dividing the ages and the number of dependents respectively. According to the analysis, the impact of income instability and psychological condition of real estate price changes on willingness to adjust real estate holding ratio differed between groups divided by ages and number of dependents. The results of this analysis will help the government to establish real estate policies and help each household to use the analysis as basic data when they make a decision about real estate. On the other hand, this study has limitations that have only been conducted cross-sectional analysis and analyzing time series changes and differences in perception between regions are going to be conducted in a future study.

• Journal of Distribution Science
• /
• v.17 no.3
• /
• pp.69-83
• /
• 2019

Purpose - This paper investigates the long term impact of RFID investment on firm value in Korea. We wand to find out why the long term performance of some firm's RFID investment is better than others. To understand the dynamics of the long term returns from RFID investment announcements, we divide our events into groups for each of the independent firm characteristic variable such as investment time period, kind of markets, industries, solvency and growth potential. We composed portfolios based on the RFID investment announcement date for each group and evaluate the monthly abnormal excess returns. Research design, data, and methodology - Based on these calendar-time portfolios, we measure the long term returns from 86 RFID investment announcements of 46 firms from 2003 to 2017. We construct the calendar-time portfolio for 3, 6, 9, 12 months of holding periods. Using the weighted least squares method, we regress the raw monthly returns of the portfolios on the Fama-French model and Carhart(1997) model. As a result, we can get the estimated risk adjusted mean monthly abnormal excess return α_P for each of the calendar-time portfolio. Results - We found that early adopters, large firms, non-manufacturing firms have very significant excess returns. We also found modestly significant excess returns for financially stable firms and slow growing firms. Put together, top managers of the firms which plan to invest RFID should understand the strategic role of RFID adoption and the generalized business process of distribution information technology investment in Korea. Moreover, the findings of this paper provide useful trading strategies to the managers of large funds who are considering on investing in RFID adopting firms. Conclusions - Put together, the results of this paper give us a new insight into how the RFID and IT technology in general and other characteristic factors' interactions affect the long term performance of firms. Using the unbiased estimates of long term returns of the calendar-time portfolios, this paper extends the understandings on short term impact of RFID adoption of existing studies. This paper also extends the current understandings of firm characteristics that affect the long term performance of RFID adopting firms.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.405-412
• /
• 1995

In order to estimate the wettability of the borosilicate glasses with different composition on the noble metals of gold and silver, the measurements of the contact angle between the solid and the liquid were made at various temperatures and holding times using the sessil-drop method. The wetting behavior and the adhesion of the phases were strongly influenced by the thermal or the physical characteristics of the materials. The dependence of wetting angle ($\theta$) on the holding time (t) could be represented by the relation of $\theta$=a.tb, whereby the wettability of the systems was quantitatively compared. Also with increasing content of borosilicate glass in the glass-gold matrix composite, the tensile strength was decreased whereas the elastic modulus was increased.