• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1388-1393
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is far higher than that of other crops, submerged condition of rice paddy is not necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experiment was conducted on the effectiveness of economical use of water by different irrigation period and different method of cultivation. The experimental plots were set up by means of randomized block design with three duplications; (a) Alltime submerged (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods were (a) Initial stage (b) Inter-stage, and (c) last stage. The topsoil of the three plots were excavated to the depth of 30cm and then compacted with clay of 6 cm thickness. Thereafter, they were piled up with the excavated top soils, leveled and cored with clay of 6cm thickeness arround footpath in order to prevent leakage. The results obtained frome the experiments are as follows; (1) There is no difference among the three experiment plots in terms of physical and chemical contditions, soil properties, and other characteristics. (2) Colulm length and ear length are not affected by different irrigation methdos. (3) There is no difference in the mature rate and grain weight of rice for the three plots. (4) The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17 persent. (5) The clay lined plot whose water holding capacity was held days long, needs only to be irrigated every 7 days. (6) The clay lined plot showes an increased yield over the untreated plot; over all the time submerged plot by 18 percent, extremely controlled plot by 18 percent, and economically controled plot by 33 percent.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.1-11
• /
• 2014

This study aimed at investigating the content and meaning of royal garden(宮苑) sightseeing event in Pyoam Gang, sehwang's "Hogayugeumwongi" As the research method, descriptive research method was used, which is to consider and interpret the content and meaning in the historical records. Research results are summarized as follows. 1. "Hogayugeumwongi", which recorded the event that the King personally guided and explained the palace to the vassals, is a very precious historical records in Korean landscape gardening cultural history. Such thing is unprecedented in Joseon Dynasty as well as China. 2. The person who recorded this event was famous for shi seo hwa samjeol in the time, and the point that he was Pyoam, who was appreciated as 'the head(總帥) of artistic and literary circles(藝苑)', adds more value to the future generations. 3. The characteristic of this sightseeing event was to praise the vassals' labor, who contributed to the completion of Kyujanggak, to establish King Jongjo's direct rule in the early period of seizure of power, and eojin(御眞) dosa(圖寫), etc., which expressed the King's dignity. Jongjo utilized Geumwon, a forbidden place in the palace, to give a special privilege to the vassals' effort, who took a great part in realizing his political ideal. 4. One of sightseeing lines toward the backyard of Changdeok Palace could be identified. Though the sightseeing lines toward the backyard were not fixed, however this might be the best sightseeing line which Jongjo intentionally chose to enjoy that day's flavor of autumn. 5. The characteristic of this event was informal and somewhat extemporary 'sightseeing'. Therefore, it is considered, that day's event was relatively private and free 'play(遊)', while 'sanghwaeojoyeon(賞花漁釣宴)', which Jongjo gave to the vassals middle after his reign, was a royal 'banquet', which prepared frames, such as event holding time and form, qualification for participation, e.g. flower viewing, fishing, writing poems, etc. This research has a significance that it considered the content and meaning in historical records including the front and the rear context that "Hogayugeumwongi" was written through the consideration of related historical materials. "Hogayugeumwongi" can be utilized as a material for storytelling with regard to royal garden sightseeing in future as a valuable cultural content, also, follow-up study on this is necessary.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.162-178
• /
• 1974

The present study is purported to provide a basic information to be utilized by nurses to care and attend effectively for patients nearing the moment of death. Therefore, the primary purpose of the study has been placed upon grasping an understanding of the trends of death in general. For this purpose: 1. By utilizing the schneidman questionnaire, the trend of death has been categorized by 6 parts and analyzed. 2. A search has been conducted to find out dying patient's needs, nurse's attitudes viewed by the patient, and nurse attitudes to dying patient. The followings are itemized results of analysis: 1. Analysis by the schneidman questionnaire. (1) In general concepts of death. the first sighting of the occurrence of death was experienced upon strangers, grandfather and great grandfather. The death is openly discussed among people of all ages and sex. Ages in which the death is mostly feared were from 12 to well over 70 yews old that are evenly distributed regardless of difference in age. (2) As to the attitudes toward death the occurrence of death to most closely associated person influenced most upon the attitude of their own termination of lives. Among the reading materials, the maximum influence was effected by the Bible. In terms of religion, the thoughts of death were Influenced by religions education in case of the believers of the western religions (36%), and by their own health and physical conditions in case of the believers in the oriental religions (35%). In case of non-believer, their attitude toward death were largely determined through their own thinking meditation (45%). People aged 20 or thereunder revealed that they wished to know the day of their own death to be occurred (58%). However, the older the less thor wanted to know. (3) As to the choosing the time of death, 57% preferred senility, and 30% preferred the time in mediately following the prime period of their lives in general. In terms of religion, 85% of the believer in the oriental religion preferred senility, and 67% in the western religion, 58% in others, Therefore. the desiring of their lives to be terminated in earlier stage, not by the natural senility. sequenced as follows : Others, western religions and oriental religions. (4) Referring to the disposal of the corpse under the assumption that it had already occurred, majority desired the burial system. There has been seen a slight tendency to consider the importance of holding funeral services for the sake of survivors. Concerning the life insurance policy, it showed that the nurse had less belief in it than the patient (5) Upon the subject of life-after-death. religion wise, 72% of western religion believers preferred to have an existence of life-after-death: Among the believers of oriental regions, 35% desired this category, 30% did not mind either way. and 35% did not desire the existence of such a life-after-death. In others, 53% did not mind whether or not such a life existed. (6) In general, serious thoughts were not being attended to the commitment of suicide. 37% emphasized that such an act should be prevented. However, 30% insisted that such commitment should not be bothered, and that society possesses no right to prevented it. More male wished to commit suicide (13%) than females (9%). 2. Nurse's attitudes toward terminal patients and patient's needs. In the instance where the patient realized that their death is imminent, most of them showed desire to discuses mainly on the problems of life. When faced a situation of this nature, it is revealed that 40% of nurses could not furnish appropriate care for them.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.141-161
• /
• 1991

Resale price maintenance has long been employed in book distribution, perhaps longer than for any other product. Another unusual practice in the book trade that has proven to be quite durable in spite of its substantial cost in real resources is the returns policy. Publishers typically grant the right to return unsold books within a stipulated time for full credit against future orders. This paper investigates the functions and effects of resale price maintenance in the book trade, and argues that resale price maintenance and returns are substitute methods of providing the same economic function. Resale price maintenance can be used to compensate booksellers for initially stocking books with uncertain prospects and for providing a conduit through which manufacturers acquire information about consumer demand (market testing services). Permitting the return of unsold books for full credit places a floor under retail prices and transfers a considerable portion of the cost of introducing a new product line back to the publisher. Both reflect publishers' needs to have their books displayed. In the U.S. returns privileges were first proposed in 1913, roughly coincident with the Macy decision outlawing RPM. Publishers slowly granted return privileges, which become nearly universal by 1970. The decline in margins in recent years has been accompanied by an increase in returns as the return policy served to substitute for lost margins on successful titles as a methods of compensating full-line booksellers. In contrast, returns privileges are unusual in countries where price maintenance in books has been practiced. These observations are consistent with our analysis. In Korea, resale price maintenance of books is practiced under an exception to Korean antitrust law. The availability of effective price maintenance is likely to reduce the use of returns programs. Since consumers prefer to obtain books at outlets where they know the books are likely to be stocked rather than taking a chance on stores that carry a more limited line, it also provides a strong incentive for booksellers to expand. But the privilege of resale price maintenance should be confined to books which publishers want to be price maintained. Resale price maintenance and returns system differ in the transactions costs associated with inventory holding, and publishers' judgement on the comparative advantage of the two schemes should be honored. Publishers should also remain free to authorize sales at discount at any time not to impair the ability of booksellers to dispose of product variants that prove unpopular.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.251-262
• /
• 2009

In this research dairy cattle barn facilities what are 4,198 houses hold over 50 heads were surveyed by scale and province. Full-time farms hold over 50 heads breed total 344,514 heads. Each of Farms holds 50 to 99 heads were 79.8 percent and breed average 82.1 heads. Dairy cattle barns were constructed september 1995 averagely. Each of barns have $1,740.0\;m^2$ scale. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, mooring+litter ground type 17.3% and other types 4.4%. The litter barn type was popular in small farms. But in large farms, freestyle type was popular than small farms. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, moohng+ltter ground type 17.3% and other types 4.4%. Type of dairy cattle robotic milking system was pipeline 41.5%, herringbone 22.8% and tandem 35.8%. The pipeline type was popular in small farms which have 50~99 heads. But in large farms which have over 200 heads, tandem type was popular than small farms. Proportion of floor type of dairy cattle barn was almost litter type 94.9%. Scraper type was popular in large farms than in small farms. Proportion of roof type of dairy cattle barn was slate 32.5%, vinyl 16.3%, sunlight 11.1%, panel 10.9, zinc plate 8.8 and steel plate 8.3%. Roof type was lots of slate type before 1995. But vinyl type is increasing after 1995. Proportion of wall type of dairy cattle barn was almost open type 83.3% and winch-curtain 26.8%. Utilization period of dairy cattle barn was 9.2 years about milker, 7.9 years about automatic feeder, 9.2 years about waterer and 10.4 years about electric facilities. In this results, there were lots of improvements about automatic feeder.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.231-240
• /
• 2009

In this research pig house facilities what are 3,029 houses hold over 1000 heads were surveyed by scale and province. Full-time farms hold over 1000 heads breed total 7,229,892 heads. And farms breed 2,386.9 heads averagely. Pig houses were constructed august 1995 averagely. Each of houses have $3,017.2\;m^2$ scale. The construction type of pig house was winch-curtain type 77.2% which was most popular, confined type 51.3%, litter type 7.4% and loft type 4.6%. The winch-curtain type was popular than windowless type in pig farms which have 1,000-1,999 heads. But pig house construction type which have more than over 10,000 heads was windowless type more than winch-curtain type. Manure removing type was slurry 72.3% and scraper 38.5% in farms which have 1,000-1,999 heads. Manure removing type was slurry 83.3% in farms which have over 10,000 heads. Proportion of roof type of pig house was slate 51.2%, panel 46.1%. But in middle or small farms, slate type was only 25.0%. Proportion of wall type of pig house was 41.9%, block 21.9%, concrete 7.6%, winch-curtain 6.3%, and bnck 5.9%. Ventilation type of pig house was natural winch 46.1%, mechanical windowless 69.8% and mixed type 53.1%. So, mechanical windowless type was popular than natural winch type. Especially the farm scale is bigger the mechanical widowless type was more. Utilization period of pig house was 8.1 years about automatic feeder, 8.3 years about waterer, 8.2 years about electric facilities and 9.0 years about floor material. Thus, almost of facilities were used at least 8 years.

• Journal of Chest Surgery
• /
• v.38 no.5 s.250
• /
• pp.366-370
• /
• 2005

Background: In general, cardiac surgery has been performed via median sternotomy. During the past decade, improvements in endoscopic equipment and operative techniques have resulted in development of minimally invasive cardiac operation using small incisions. With the advent of a voice controlled camera-holding robotic arm (AESOP 3000, Automated Endoscope System for Optimal Positioning), cardiac surgery entered the robotic age. Material and Method: Between April 2004 and December 2004, a total of seventy eight patients underwent robotic cardiac surgery, of whom sixty four patients underwent robot-assisted minimally invasive cardiac surgery via 5cm right lateral minithoracotomy using voice controlled robotic arm, femoral vessels cannulation, percutaneous internal jugular cannulation, transthoracic aortic cross clamp. Other fourteen patients underwent MIDCAB via internal mammary artery harvesting using AESOP. Result: Robotic cardiac surgery were mitral valve repair in 37 cases, mitral valve replacement in 10 cases, aortic valve replacement in 1 case, MIDCAB in 14 cases, ASD operation in 9 cases, and isolated Maze procedure in 1 case. In mitral operation, mean CPB time was $165.3\pm43.1$ minutes and mean ACC time was $110.4\pm48.2$ minutes. Median length of hospital stay was 6 days (range 3 to 30) in mitral operation, 4 days (range 2 to 7) in MIDCAB, and 4 days (range 2 to 6) in ASD operation. For complications, 3 patients were required by reoperation for bleeding. There was no hospital mortality. Conclusion: Our experience of robot cardiac surgery suggests that many cardiovascular surgeons will be able to perform minimally invasive cardiac operations through small incisions with robot-assisted video-direction. Well-designed studies and close long-term follow-up will be required to analyze the benefits of robot-assisted operation.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.109-117
• /
• 2011

The exhibition industry, as technology-intensive, eco-friendly industry, contributes to regional and national development and enhancement of its image as well, if it joins cultural and tourist industry. Therefore, We need to revitalize the exhibition industry, as actively holding an exhibition event. However, to attract a number of exhibition audience, the work of enhancing audience satisfaction and awareness of value for participation should be prioritized after improving quality of service within exhibition hall. As one way to enhance the quality of service, it is thought that the way providing personalized service geared toward each audience is needed. that is, if audience avoids the complexity in exhibition space and it affords them service to enable effective time and space management, it will improve the satisfaction. All such personalized service affordable lets the audience's preference on the basis of each audience profile registered in advance online grasp. and Based on this information, it is provided with exhibition-related information suited their purpose that is the booth for the interesting audience, the shortest path to go to the booth and event via audience's smart phone. and it collects audience's reaction information, such as visiting the booth, participating the event through offered the information in this way and location information for the flow of movement, the present position so that it makes revision of existing each audience profile. After correcting the information, it extracts the individual's preference. hereunder, it provides recommend booth and event information. in other words, it provides optimal information for individual by amendment based on reaction information about recommending information built on basic profile. It provides personalized service dynamic and interactive with audience. This paper will be able to provide the most suitable information for each audience through circular and interactive structure and designed smart-phone application supportable for updating dynamic and interactive personalized service that is able to afford surrounding information in real time, as locating movement position through sensing. The proposed application collects user‘s context information and carrys information gathering function collecting the reaction about searched or provided information via sensing. and it also carrys information gathering function providing needed data for user in exhibition hall. In other words, it offers information about recommend booth of position foundation for user, location-based services of recommend booth and involves service providing detailed information for inside exhibition by using service of augmented reality, the map of whole exhibition as well. and it is also provided with SNS service that is able to keep information exchange besides intimacy. To provide this service, application is consisted of several module. first of all, it includes UNS identity module for sensing, and contain sensor information gathering module handling and collecting the perceived information through this module. Sensor information gathered like this transmits the information gathering server. and there is exhibition information interfacing with user and this module transmits to interesting information collection module through user's reaction besides interface. Interesting information collection module transmits collected information and If valid information out of the information gathering server that brings together sensing information and interesting information is sent to recommend server, the recommend server makes recommend information through inference with gathered valid information. If this server transmit by exhibition information process, exhibition information process module is provided with user by interface. Through this system it raises the dynamic, intelligent personalized service for user.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.212-218
• /
• 2011

This study was performed to determine the relative quality of mungbeans harvested in bulk after applying a labor-saving cultivation (LSC) method, compared to mungbeans harvested three different times under the conventional cultivation condition. There was no significant difference in starch, crude protein, and vitexin or isovitexin content of seed according to the cropping system or harvest time. The mungbeans grown under the LSC method had the highest crude fat content, followed by mungbeans from the third-, the second- and the first-harvest mungbeans under the conventional cultivation. No significant difference was found in the composite ratio of saturated fatty acids to unsaturated fatty acids according to cropping system or harvest time. The second-harvest mungbeans grown under the conventional cultivation condition had 17 different types of fatty acids, while the third-harvest mungbeans grown under the conventional cultivation and those grown under the LSC condition had the fewest types of fatty acids with 12. Of the major saturated fatty acids, palmitic acid and arachidonic acid had the highest composite ratio in the first conventional cultivation followed by the second, the third and the LSC. However, stearic acid showed the opposite tendency. Of the major unsaturated fatty acids, linoleic acid had the highest composite ratio in the first conventional cultivation, followed by the second and third conventional cultivation and the LSC. Amylogram characteristics of the mungbeans were significantly different according to cropping system and harvest times. The mungbeans harvested after the first conventional cultivation had significantly higher pasting temperature, peak viscosity, holding strength viscosity, final viscosity and breakdown, while mungbeans harvested after the third conventional cultivation had significantly higher setback viscosity. In contrast, the mungbeans harvested under the LSC methods had a significantly lower amylogram value. When harvest rate, color values and amino acid content of sprout were measured, mungbeans grown under the LSC conditions had a low harvest rate of sprout, but had Hunter's color values and amino acid content of sprout similar to those of mungbeans grown under the conventional cultivation condition.