• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1781-1789
• /
• 2013

Many studies have been carried out with respect to packaging methods and temperature conditions of beef. However, the effects of packaging methods and temperature conditions on the quality characteristics have not been extensively studied in low-grade beef. Low-grade beef samples were divided into 3 groups (C: ziplock bag packaging, T1: vacuum packaging, and T2: modified atmosphere packaging (MAP), $CO_2/N_2$ = 3:7) and samples were stored at $4^{\circ}C$ for 21 days. The water-holding capacity (WHC) was significantly lower in T1 than in the other samples up to 14 days of storage. The thiobarbituric acid reactive substances and volatile basic nitrogen values were significantly lower in T1 and T2 than in C after 7 to 14 days of storage. The total bacterial counts were significantly lower in T1 and T2 than in C after 14 days of storage. In a sensory evaluation, tenderness and overall acceptability were significantly higher in T1 and T2 than in C at the end of the storage period (21 days). We propose that the MAP method can improve beef quality characteristics of low-grade beef during cold storage. However, the beneficial effects did not outweigh the cost increase to implement MAP.

• The Korean Society of Law and Medicine
• /
• v.15 no.2
• /
• pp.91-122
• /
• 2014

For a variety of reasons, the number of medical disputes is continuously rising. Due to the intrinsic qualities of medical treatments, one would find it more apt to subject medical disputes to general conflict resolution procedures rather than to once-for-all decisions under legal suits. To address the increasing medical disputes with greater professionalism and efficiency, the Medical Disputes Mediation Act was enacted and a medical dispute mediation system put in place, while drawbacks have been blamed to both. The current mediation procedures require the respondent's agreement as a disclosure requirement. A reasonable improvement to this would be to amend the regulation of agreement supposition, or to enforce procedural participation only to public health facilities managed by the national or regional government. Furthermore, small claims cases of 20 million KRW or less in claim may be considered for conciliation-prepositive principle. The concentration on small claim medical disputes is a phenomenon that can be addressed by carrying out maximum authentication commissions or similar measures, one of the solutions by enhancing the public trust in the Korea Medical Dispute Mediation and Arbitration Agency. The proper management of medical authentication teams is one way to address the existing problems in the authentication system. For this, the number of team members shall be increased under more flexible authentication procedures. All indemnity resources for medical accidents of force majeure must be borne by the Government, for it is the body principally responsible for social compensation. Placing this cost on the establisher of the subject medical facility holds the possibility of violating fundamental rights. While the costs for subrogation payment system for damages may be borne by the healthcare facility establisher, a deposit-based system must be created for cases in which the facility shuts down, without holding the responsibility for accident cause. Such change to a deposit-based system will evade the controversies of unconstitutionality, etc.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.439-447
• /
• 2013

Time-temperature integrators (TTIs) are simple and cost-efficient tools which may be used to predict food quality. Enzymatic TTIs are devised to indicate food quality in the form of color alterations from green to red, based on the cumulative impacts of temperature and time period on the enzymatic reactions. In this study, the quality of ground beef patties was investigated for the parameters of pH levels, color, VBN, water holding capacity, and total microbial counts, depending on various storage temperatures (5, 15, and $25^{\circ}C$). TTIs were attached to the surface of the ground beef patties in order to evaluate the degree of correlating colorimetric changes with the determined quality parameters. Through the Arrhenius equation, activation energy and constant reaction rates of TTI, VBN, and total microbial counts were calculated as to observe the relationship between enzymatic reactions of the TTI and food spoilage reactions of the ground beef patties. VBN and total microbial counts were already increased to reach decomposition index (VBN: 20, total microbial count: 7-8 Log CFU/g) of meat at middle stage of storage period for each storage temperature. Although activation energy of TTI enzymatic reactions and food spoilage reactions of the ground beef patties were similar, the change of TTI color was not a coincidence for food spoilage at $5^{\circ}C$ and $15^{\circ}C$ of storage temperature. It was suggested that TTI should be designed individually for storage temperature, time, type of meat, or decomposition index of meat.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.10
• /
• pp.581-586
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage-doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A circuit design method is shown by experimentation and confirmed simulation. The experimental results of the proposed diode rectifier satisfies the harmonic guide lines. A high input power factor of 97(%) and an efficiency of 98[%] are also obtained. The new rectifier with no controlled switches meet the harmonic guide lines, resulting in a simple, reliable and low-cost at-to dc converters in comparison with the boost-type current-improving circuits. This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage. And this paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit is constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduction and the power factor improvement. Half pulse-width modulated (HPWM) inverter was explained compared with conventional pulse width modulated(PWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.624-633
• /
• 2018

While the multimedia lecture system has been getting smart using immerging technology, the microphone still relies on the classical approach such as holding in hand or attaching on the body. In this paper, we propose a ceiling mounted array microphone system that allows a wide reception coverage and instructors to move freely without attaching microphone. The proposed system adopts cell and handover of mobile communication instead of a complicated beamforming method and implements a wide range microphone over several cells with low cost. Since the characteristics of unvoiced speech is similar to Pseudo Noise it is shown that soft handover are possible with 3 microphones connected to delay-sum multipath receiver. The proposed system is tested in $6.3{\times}1.5m$ area. For real-time processing the correlation range can be reduced by 82% or more, and the output latency delay can be improved by using the delay adaptive filter.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.62-68
• /
• 2009

Number of vehicles in Korea is gradually increasing and it exceeded 16 million in 2007. Holding of vehicles is connected to disposal, owing to this reason the importance of ELVs recycling has been emphasized. The recycling of ELVs makes the disposal of ELVs easier as well as protects environment and it has the alternative effect economizing the insufficient resource. This study was carried out to evaluate the economic effect of recycling of ELVs compared with disposal of ELVs. The analysis showed that recycling process makes a profit in comparison to the disposal of ELVs. Therefore the government has to consider establishing the regulation related to recycling of ELVs or materials and car manufactures have to develop the efficient dismantling and recycling methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2724-2730
• /
• 2015

Internet of Things (IoT) is possibly the most widely discussed technological concept in today's technology circles. This technology is expected to dramatically change not only how we work but also how we live. The concept of IoT basically means a web of connected devices which can be controlled over a data network. With cost of technology required to control these devices going down and increasing internet connectivity through smartphones, IoT is expected to be an all pervasive technology in the next 10 years. In this paper, we study the technological landscape of this fast growing technology domain from an Intellectual Property (Patents) perspective. We find that the patent distribution in this domain is very fragmented with the top patent applicants in the field holding around 5% of the total patents. Especially, the US geography has seen the maximum patent filings and is closely followed by the big Asian markets of Japan and Korea.

• Clinical and Experimental Pediatrics
• /
• v.63 no.11
• /
• pp.433-437
• /
• 2020

Background: Indonesia is one of the countries with the highest preterm birth rate. Preterm infants are more likely than term and normal weight infants to experience neonatal mortality and morbidity due to acute respiratory, gastrointestinal, immunologic, central nervous system, hearing, and vision problems. Kangaroo mother care (KMC) is a proven cost-effective intervention to help reduce mortality rates among preterm infants; however, it has not been fully implemented in hospitals. Purpose: Assess KMC knowledge and perceptions among health providers. Methods: This qualitative study was conducted from December 2015 to April 2016 and consisted of 21 in-depth interviews and 3 focus group discussions (FGDs). The 3 categories of health personnel in the study were clinical providers, hospital management representatives, and Indonesian Midwife Association members. Results: Most health providers know about the benefits of KMC including stabilizing temperatures, weight gain, and maternal-infant bonding and reducing human resources and labor costs. They were also aware of which newborns were eligible for KMC treatment. Their knowledge was mostly gained from observation or obtained from pediatricians and personal experience. They believed that a low birth weight infant in an incubator could not be treated with KMC and that it could only be practiced if a special gown was used when holding the baby. This perception could be caused by a lack of formal KMC training, leading to misunderstanding of its aspects. Conclusion: In conclusion, KMC knowledge of clinical providers in the 2 hospitals was sufficient, primarily due to their health-related educational background. Some perceptions could be potential barriers to or facilitate the implementation of KMC practice. These perceptions should be considered in future KMC training designs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.338-344
• /
• 2021

In this study, an actual test procedure was considered for the effective operation of a bulletproof test. The problems of the existing system were drawn in two ways. First, it is difficult to mount items of various shapes. Second, various test standards cannot be applied. To improve these problems, an automated and standardized mounting system was designed/applied to mount various items. The multi-purpose mount was compatible with the backing support for body armor testing. The sample holding frame was located inside and was designed to mount samples of various sizes and shapes through vertical movement and fixation without a separate detachment/attachment process. A comparison of the economics before and after the introduction of the item mounting system confirmed the effectiveness of the system by the increased number of daily tests and equipment utilization and reduced hourly cost.