• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1183-1187
• /
• 2005

In this paper, a weathercock-shaped microstrip patch antenna for application in 5.25GHz band wireless LAN is designed and fabricated. To obtain sufficient bandwidth in VSWR<2, the T-slot is inserted on the patch, the coaxial probe source is used. The measured result of fabricated antenna obtained 350MHz or about $7.62\%$ bandwidth in VSWR<2 referenced to the center frequency, the gain of 5.25${\~}$6.70dBi. The experimental 3-dB beam width is shown to be broad across the pass band in azimuth and elevation at $80.32^{\circ}$ and $83.88^{\circ}$, in several.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.385-392
• /
• 2013

In this paper, microstrip antenna to enhance the isolation between transmitting port and receiving port under the proximity objects is proposed, and applied to the Doppler radar sensor working at 5.8GHz ISM band which detects vital signals of a human body. Two 3dB quadrature hybrids are placed around radiation patch to form a balanced structure between transmitting port and receiving port, such that it consistently provides enhanced Tx/Rx isolation and excellent return loss over nearby objects. It is theoretically analyzed and simulated to verify the validity of the proposed application. The fabricated antenna that is 2mm away from the human body, has more than 16 dB return loss and at least 30dB isolation over ISM frequency band of 5.8GHz.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.770-779
• /
• 2014

In this study, a numerical estimation method for 3D underwater radiated noise pattern using hull vibration and total acoustic power of the vibrating structure in the far-field is proposed. The underwater radiated noise pattern is known to be predicted using the vibration signals and radiation efficiency of each surface patch. But it is very difficult to know radiation efficiency of each surface patch which is one of important factors to calculate the 3D underwater radiated noise pattern. Instead of using radiation efficiency of each patch, the underwater radiated noise level is modified with the total acoustic power of the vibrating structure. The suggested estimation method for underwater radiated noise pattern is discussed with numerical model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.315-322
• /
• 2007

In this paper, active integrated antenna with left hand circular polarization(LHCP) for a transmitter of UHF RFID reader has been described. A novel rectangular ring patch as a radiator of the active antenna is proposed for easier impedance matching, smaller patch size, and LHCP characteristics. An amplification circuit is placed in the opening area of the radiator and is combined with it to work as oscillating circuit around 915 MHz. From the test results, impedance bandwidth of 29 MHz, 3 dB axial ratio bandwidth of 20 MHz, 3 dB beamwidth of 85 degree, and effective radiation power of 8.8 dBm have been obtained.

• Convergence Security Journal
• /
• v.13 no.1
• /
• pp.79-86
• /
• 2013

The objective of DDoS Attacks is to simply disturb the services. In recent years, the DDoS attacks have been evolved into Multi-Vector Attacks which use diversified and mixed attacking techniques. Multi-Vector Attacks start from DDoS Attack and Malware Infection, obtain inside information, and make zombie PC to reuse for the next DDoS attacks. These forms of Multi-Vector Attacks are unable to be prevented by the existing security strategies for DDoS Attacks and Malware Infection. This paper presents an approach to effectively defend against diversified Multi-Vector attacks by using Reverse Proxy Group and PMS(Patch Management Server).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1796-1803
• /
• 2013

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication microstrip patch antenna. The aim of the paper is to design and fabricate an inset fed rectangular microstrip antenna and study the effect of antenna dimensions length (L), width (W) and substrate parameters relative dielectric constant (${\varepsilon}r$), substrate thickness on radiation parameters of band width. PSO algorism was applied to IE3D, low resistance against, band width and advantage, were improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1731-1736
• /
• 2008

In this paper, singly fed circularly polarized nearly-square patch antenna for receiving S-DMB is presented. It used teflon substrate of relative dielectric constant ${\in}_{\gamma}=2.2$ and the sire is $40{\times}40{\times}15[mm]$. Experimental results of fabricated antenna show that input return loss and axial ratio are about 22MHz, 25MHz at the center resonant frequency, respectively. And fabricated LNA has gain of 27.5 [dB], NF of 1.27 [dB], input return loss of -15.4 [dB] and output return loss of -18.9 dB, respectively. Simulation results and experimental results are good agreements. This proposed antenna is well able to handheld gadgets for receiving S-DMB.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.22-25
• /
• 2012

In this paper, we proposed a method of the resonant frequency shift of a microstrip patch antenna using $LiNbO_3$, PVDF and FR-4 substrates. We designed and analyzed from these parametars optimized using Ensemble V 7.0 of the simulation tool. We observed the resonant frequency by DC appled electric field in a microstrip patch antenna. When $LiNbO_3$ substrate were applied from -300 to 300 V/mm, we obtained the resonant frequency shift of maximum 29 MHz. The microstrip patch antenna with PVDF (poly vinylidene fluoride) substrate, we obtained the resonant frequency shift of maximum 17 MHz at frequency 6 GHz. but when Epoxy FR-4 substrates used, the resonant frequency does not changed. This results showed the resonant frequency shift without physical strains in a microstrip patch antenna.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2003

In this study, we provide a single element log-periodic antenna that the feeding networks and array structures are aperture coupled and series dipole array type. We made the antenna for direct receiving the Moogoongwha satellite broadcasting signal. The transmission power was able to feed the patch dipole in series due to lay perpendicularly 8 series patch dipole on tapered slot. The patch dipole radiation pattern which fed in series power, make the main beam direction up $37^{\circ}{\sim}42^{\circ}$ within the BS/CS bandwidth. The main beam gain was measured 9.31~11.03 dBi. Using 32 elements to array the elements properly, we acquire $4{\times}8$ array structure on limited PCB board. As a result, it has been found that the new planar DBS antenna structure have high gain over 10dBi and acceptable elevation angle over 42 degree, and we can apply this result to commercial DBS reception antenna manufacturing.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.6
• /
• pp.359-364
• /
• 2007

Pine bark extract is well-known as a very powerful antioxidant, anti-inflammatory, and antibiotic material. French maritime pine bark extract ($Pycnogenol^{(R)}$) of Horphag Research has monopolized the world market over 30 years. Korean red pine bark extract ($Pinexol^{(R)}$) was first manufactured by the patent technology of NutraPharm in Korea in 2006. Feasibility of topical gel and patch formulations of Pinexol was systematically investigated by evaluating the skin absorption of catechin as a reference compound. In vitro hairless mouse skin absorption of catechin from gel formulation was higher than that from patches. However, significant amount of catechin was also deposited inside the skin from patch formulations, which were dependent on the types of pressure sensitive adhesives. Thus, it seems to be feasible to control the topical delivery of Pinexol by using both gel and patch formulations, and be necessary to conduct further systematic investigation.