• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.391-399
• /
• 2006

In order to solve the optimization problem of designing the trajectory of three-dimensional horizontal well, we establish a multi-phase, nonlinear, stochastic dynamic system of the trajectory of horizontal well. We take the precision of hitting target and the total length of the trajectory as the performance index. By the integration of the state equation, this model can be transformed into a nonlinear stochastic programming. We discuss here the necessary conditions under which a local solution exists and depends in a continuous way on the parameter (perturbation). According to the properties we propose a revised Hooke-Jeeves algorithm and work out corresponding software to calculate the local solution of the nonlinear stochastic programming and the expectancy of the performance index. The numerical results illustrate the validity of the proposed model and algorithm.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권10호
• /
• pp.487-495
• /
• 2005

This paper reviews the characteristic of thermal and temperature of oil field cable in transient state such as grounding fault and lightning surge. For analysis in various conditions, many actual underground power cable systems are modeled using ATP. These results are applied for the examination of temperature increase when the single line to ground fault by the breakdown of insulation part and hitting of lightning surge are occurred. The inner part temperature of OF cable is analysed according to the various kinds of cable using the thermal model of transient state. The temperature increase of sheath and crossbonded lead bv fault current is also analysed using IEC 60949.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.157-167
• /
• 2020

The purpose of this study is to analyze the relationship between the occurrence of intermediate peak and time duration, and to conduct a review for the causes of the intermediate peak. In this test, ice impact tests were conducted using a bow side shell frame and ice specimen. A total of 70 samples were manufactured. Two types of ice specimen with relatively different surface conditions were used. The criterion for dividing the two types of ice specimen was the different exposure times to room temperature after freezing. This experiment was conducted for each parameter in order to reproduce the actual icebreaking situation. As a result of the analysis, the intermediate peak in the ice load signal have been found to be caused by mechanisms by which the inner surface of broken ice contact with hull immediately after the initial hitting point of ice has been broken.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.209-212
• /
• 2018

이방성 도전필름(ACF)을 사용한 본딩은 납땜이 용이하지 않은 이질적인 소재 간 미세 접합을 형성하는데 널리 사용되어진다. 성공적인 ACF 본딩 구현을 위한 3가지 제한조건이 존재한다. 본딩 접촉점은 설정된 작업 시간동안 적절한 압력과 온도를 유지한 헤드에 의해서 압착되어야 한다. 본 논문에서는 머신 비전을 기반으로 한 ACF 본딩기법을 제안하고 실험을 통해 검증한다. 시스템은 본딩 작업대 상의 PCB 위치 및 방향을 계산하고 헤드가 압착되어야 하는 최적의 접촉점을 결정한다. 제안한 시스템이 접촉면 상의 헤드 평탄도를 보장함으로써 접착력을 향상시킬 수 있음을 실험결과를 통해 보여준다.

• 천문학회보
• /
• 제37권2호
• /
• pp.143.1-143.1
• /
• 2012

We attempt to investigate the main reason of the asymmetrical light curves of contact and near-contact eclipsing binary base on the hypothesis that cool spot was produced on late type star while hot spot was produced from transferred material from their companion star hitting surface. We select 7 eclipsing binary systems which showed asymmetric light curves and mass transfer. Period variation and mass transfer rate were obtained from O-C diagram. Radial velocity curves and light curves of those 7 eclipsing binary system were adopted from available literature in order to obtain the absolute dimension. For four contact eclipsing binary system (AD Phe, EZ Hya, AG Vir and VW Boo), their component stars belonged to spectral type G to K was fitted by cool spot model. While the other two near-contact systems (RT Scl and V1010 Oph) and one contact system (SV Cen) was fitted by cool spot model. The densities of the materials are adopted from stellar model which calculate by stellar structure code. The calculated spot temperature turns out to agree with the photometric solution but there are no correlate between period variation rate and type of spot.

• 한국국방경영분석학회지
• /
• 제33권1호
• /
• pp.117-133
• /
• 2007

무장정확도는 무기체계 획득의 기본 지표가 되는 성능으로 이에 대한 정확한 개념 정립과 시험평가 방법의 설정이 요구된다. 기존의 항공무장의 정확도 시험평가 방법은 무장의 탄착형태를 정확하게 고려하지 않았다. 본 연구는 확률 및 통계기법을 이용하여 최적 CEP 계산법과 각 시험평가 단계별 평가방안을 제시하였다. 먼저, 알려진 여러 무장정확도 계산법 중 항공무장의 탄착형태를 반영하는 최적 CEP 계산법으로 록히드마틴 CEP법과 존슨 CEP법을 추천하며, 시험평가 단계별 최적의 시험평가 방법을 제시하였다. 본 연구결과는 항공무장의 정확도 평가에 유용하게 사용될 수 있을 것이다.

• Spatial Information Research
• /
• 제12권4호
• /
• pp.321-328
• /
• 2004

본 연구는 PhotoModeler Pro를 이용하여 공간 정보를 자동적으로 추출하기 위한 기법에 관한 것이다. PhotoModeler Pro는 Windows시스템에서 개인용 컴퓨터 상에서 3차원 공간 정보를 취득할 수 있는 우수한 도구이나 스테레오 이미지를 자동적으로 병행하여 처리하는 데는 충분하지 않은 단점이 있다. 따라서 본 연구는 PhotoModeler Pro상에서 자동생성 프로그램과 DDE인터페이스를 이용한 스테레오 매칭 연구에 관한 것으로, 적용 지역은 사면과 계단이 많은 타테야마 지역(일본 나가사키 시)을 대상으로 하였다. 연구 대상 지역에 대한 자동 스테레오 매칭 결과 $100\%$의 적중률을 보였다.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.345-352
• /
• 2011

This paper focuses on the properties analysis of 9mm bullet dual structure core to substitute current lead core by environment-friendly combination of W-Cu-Ni system high density composite materials. So the four combination samples were made of dual core with the different center of gravity location backward or forward compare to that of lead type bullet, and we experimented about the performance of 9mm bullet dual structure core. In the experimental results, the outer shape of core of four environment friendly samples on the target maintain marginally, while the current lead core bullets are completely crushed after hitting the target. The penetration depth of environment friendly samples excel seven times to lead type bullet and the three out of four samples with forward adjusted center of gravity penetrate deep as twice as ones backward. The impact tolerance of all four samples satisfies military specification, however, more firing tests are required to improve reliability of scattering distribution.

• 대한한의학회지
• /
• 제39권3호
• /
• pp.41-50
• /
• 2018

Objectives: The study is aimed to utilize Taesikbub and Lung-doyinbub described in "Dong-Ui-Bo-Gam" as a Korean Traditional Pulmonary Rehabilitation Exercise. Methods: We preliminary researched pulmonary rehabilitation exercise using domestic and international databases and old literatures of Korean Medicine. Then made a draft of Korean Traditional Pulmonary Rehabilitation Exercise based on "Dong-Ui-Bo-Gam". After organizing expert group for verifying the draft of the exercise, we developed the final Korean Traditional Pulmonary Rehabilitation Exercise. Results: The Korean Traditional Pulmonary Rehabilitation Exercise is composed of 5 actions including breathing method, flexibility exercise, percussion and hitting teeth. This exercise is recommended twice a day for at least 5 days per week under the supervision of specialist. It is expected to improve physical activity, dyspnea, health-related quality of life (HRQoL) as well as psychiatric symptoms by breathing deep and slow and exercising the thorax and upper limb muscles. Conclusion: Taesikbub, Lung-doyinbub in "Dong-Ui-Bo-Gam" may be suggested as a better pulmonary rehabilitation exercise for patients of chronic lung disease.