• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.128-136
• /
• 2008

In this paper, we propose a new cache structure for effective error correction of soft error. We added check bit and SEEB(soft error evaluation block) to evaluate the status of cache line. The SEEB stores result of parity check into the two-bit shit register and set the check bit to '1' when parity check fails twice in the same cache line. In this case the line where parity check fails twice is treated as a vulnerable to soft error. When the data is filled into the cache, the new replacement algorithm is suggested that it can only use the valid block determined by SEEB. This structure prohibits the vulnerable line from being used and contributes to efficient use of cache by the reuse of line where parity check fails only once can be reused. We tried to minimize the side effect of the proposed cache and the experimental results, using SPEC2000 benchmark, showed 3% degradation in hit rate, 15% timing overhead because of parity logic and 2.7% area overhead. But it can be considered as trivial for SEEB because almost tolerant design inevitably adopt this parity method even if there are some overhead. And if only parity logic is used then it can have $5%{\sim}10%$ advantage than ECC logic. By using this proposed cache, the system will be protected from the threat of soft error in cache and the hit rate can be maintained to the level without soft error in the cache.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.72-78
• /
• 2020

The accident fatality rate has decreased by more than 90% compared to 2006, due to the safety management and safety investment based on the Rail Safety Act. Most railway safety indicators, including fatality rates, have improved significantly from 60% to 80%, reaching the level of developed countries in terms of most railway safety indicators. However, the only staff fatality rate at work is not improved, and it is 3 to 5 times higher than that of developed countries. Most of the fatality occurred during employee's work recently occurred due to accidents hit by train while track work. In principle, when operating track need to check or maintenance, the operation of the train should be stopped and the work carried out. However, in Korea, due to the highest passenger density and train operating density in the world, it is caused by a structural problem that requires workers to enter the track while the train is running and perform various tasks such as maintenance and inspection. In this study, we analyzed the risk of accidents caused by hit by trains on the track, which is the biggest cause of staff fatality, using the main statistics of the last 10 years. In detail, the scenarios of the main causes of hit by trains and workers were formed to suggest the effectiveness of the current preventive measures and supplementary.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.125-134
• /
• 2023

In this paper, we propose an efficient surveillance RADAR(RAdio Detection And Ranging) interface control unit(ICU) design in the naval combat system. The proposed design applied a standardized architecture for modules that can be shared in ship combat system software. An error detection function for each link was implemented to increase the recognition speed of disconnection. Messages that used to be sent periodically for human-computer interaction(HCI) are now only transmitted when there is a change in the datagram. This can reduce the processing load of the console. The proposed design supplements the radar with the waterfall scope and time-limited splash recognition in relation to the hit check and zeroing of the shot when the radar processing ability is low due to the adoption of a low-cost commercial radar in the ship. Therefore, it is easy for the operator to determine whether the shot is hit or not, the probability of wrong recognition can be reduced, and the radar's resources can be obtained more effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.193-197
• /
• 2016

The performance of Precision Guided Missiles is estimated by using hit probability only, which is calculated by hits against total amounts of fires in current domestic live-fire tests. It has a limitation in judging the performance of all produced Precision Guided Missiles by using the calculated hit probability according to the result of live-fire test, because the overall characteristics of the produced Precision Guided Missiles are not considered. In other words, a method is needed to estimate the confidence level which is more reliable than simply calculated hit probability according to the result of live-fire test for guaranteeing the hit probability of Precision Guided Missiles by certain level, which is already being operated or produced. This paper introduces a method to estimate the confidence level of Precision Guided Missiles by minimum live-fire tests using Hypergeometric distribution and Bayes' rule suitable for the characteristics of Precision Guided Missiles, which are small production, high costs and unable to check whether the missile hits the target or not before the live-fire tests. Also, this paper suggests a reasonable confidence level for showing the performance of the Precision Guided Missiles using the results of live-fire tests and domestic and foreign literature, when the result of live-fire tests will be decided.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.313-316
• /
• 2016

Highly probable cause of the current turmoil critical national infrastructure and private enterprise information systems failures or national event of an accident, it is inevitable huge hit in corporate business as well as a significant impact on the national benefit. This is a trend subject to the stability of the national management information system has a significant impact on people and society, such as banking, telecommunications, transport and energy, which can be extended into a private institution. However, public and private ICT business through the development of Information system Audit or CMMI(Capability Maturity Model Integration) certification check the quality of the target system, but quality check on the reliability of the information system operations after construction is either not promoting met for some safety test results a situation that does not enabled by insufficient. By preventing the disorder or an accident of this study, the diagnostic reliability information systems through inspection and evaluation system development of information systems being established, and to minimize service confusion and study ways to ensure customer - oriented service.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2015

Vulnerability assessment is a process to calculate the damage degree of a combat vehicle when the combat vehicle is attacked by an enemy. When the vehicle is hit, it is necessary to analyze the shot line to calculate which components are damaged and judge whether the armor of the vehicle is penetrated by enemy's warhead. To analyze the shot line efficiently, this paper presents the target modeling and the shot line analysis system to assess vulnerability of the ground combat vehicle. This system is easily able to do several functions: 1) the program reads STL files converted from CAD model which is designed by commercial CAD software. 2) It calculates the intersection between triangle of STL mesh and the shot line, and check if the components of the model are penetrated. 3) This program can visualize the results using OpenGL. The vulnerability assessment using the shot line analysis can be used to model the armor of the combat vehicle and arrange the inner components effectively in the early stage of development of the combat vehicle.

• Publications of The Korean Astronomical Society
• /
• v.14 no.2
• /
• pp.103-112
• /
• 1999

We have investigated the solar activity variation with period shorter than 1000 days, through Fourier transformation of solar cycle 21 and 22 data. And real time predictions of the flare maximum intensity have been made by multilinear regression method to allow the use of multivariate vectors of sunspot groups or active region characteristics. In addition, we have examined the evolution of magnetic field and current density in active regions at times before and after flare occurrence, to check short term variability of solar activity. According to our results of calculation, solar activity changes with periods of 27.1, 28.0, 52.1, 156.3, 333.3 days for solar cycle 21 and of 26.5, 27.1, 28.9, 54.1, 154, 176.7, 384.6 days for solar cycle 22. Periodic components of about 27, 28, 53, 155 days are found simultaneously at all of two solar cycles. Finally, from our intensive analysis of solar activity data for three different terms of $1977\~1982,\; 1975\~1998,\;and\;1978\~1982$, we find out that our predictions coincide with observations at hit rate of $76\%,\;63\%$, 59 respectively.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.10
• /
• pp.187-202
• /
• 1999

We desperately recognize from the economic situation in IMF crisis that only competive goods and serviced. It is anticipated that this difficult situation will probably be continued till 1999. Therefore, it is necessary to think over real aspects of eating=outdoors in IMF period and to provide an opportunity to confront with this crisis. Analysis a recent tendency of domestic eating-outdoors business, there appears, first of all, dual types of eating-outdoors; the one is a sort of 'Cost Sale', which provides some special menu with lowest prices, and the other is a type of 'Family Restaurant', which regards the atmosphere of the place as one of the most essential elements. Both types are getting more popular today. As the result, neither of the alternative cannot recover the current Depression. It is natural that no other conditions can compete with good tastes, fancy atmosphere, and good prices. As a matter of fact, however, it is quite difficult to run this type of bussiness adjusted the above whole conditions. Therefore owners of eating-house must decide to run either ' Cost Sale' or 'Family Restaurant' first and investigate some problems and conditions accordingly. In ane way, the owner intensively visits to some eating houses which is similar style in size and management to that of his style in size and management to that of his and look over what is good and what is bad Right after this investigation, it is efficient for he or she to improve his or her business style in size and management in a short period. It is helpful to check some complements; improvement of signboards, cleaning up of the interior, selecting suitable menu, adjusted prices, tastes, and service quality etc. Although eating-outdoors business is hard hit by IMF, We hope that it would rapidly be brisk in 2000, becaused by that time the basis of each industry would be high qualified, and rich technology would be accumulated.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.247-254
• /
• 2006

Biometrics are getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry can be used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. It could also be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. This system presents verification results based on hand measurements of 20 individuals. The verification process has been tested on a size of $320{\times}240$ image, and result of the verification process have hit rate of 95% and FAR of 0.020.

• Journal of Forest and Environmental Science
• /
• v.29 no.3
• /
• pp.237-248
• /
• 2013

The legal basis for the systematic prevention and response to landslide hazards, and the rehabilitation of landslide-hit areas, was established through the amendment of the Forest Protection Act in August 2012. The most noticeable amendment to the Act is the inclusion of clauses associated with the designation and management of landslide-prone zones (including debris flow-prone zones). In this paper, we (1) introduce the clauses related to the designation and management of landslide-prone zones that were included in the amended Forest Protection Act, (2) examine their significance by reviewing the present status of related domestic laws and structural countermeasures such as sediment check dams for sediment-related disaster prevention, and (3) suggest the future directions of the procedure for the designation and cancellation of such zones, and their maintenance and institutional aspects. The establishment of an institutional device for the designation and management of landslide-prone zones has great significance in the aspect of (1) the establishment of a comprehensive management and prevention system for potential landslide-prone zones in forested areas where the hazard risk has been poorly recognized as compared with the flood risks in lowlands, and (2) the establishment of the basis for overcoming the limits of structural countermeasures according to limited budgets. To develop the designation and management system for landslide-prone zones, not only must present problems be addressed, but a cooperation system between the administration and local residents must also be established.