• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.257-266
• /
• 1998

This study was conducted to examine the changes of the mechanical properties of the position in jean slacks during the wear, previously used for the wearing test, which were subjected to repeated tensile-shearing deformation using a simulated fatigue tester has been investigated and compared, by calculating both mechanical properties and hand value(HV) of these fabrics with KES-F system and the by obtaining the THV through these calculated properties. The results are as follows. 1. The fatigue phenomenon of mechanical properties was the LT, 2H B, 2HBS, MMD, SMD, RC values increased, elasticity values of tensile, bending and shearing properties, such as B, G and compression properties LC, WC were reduced. It was shown, then, that those fabrics lost their elasticity and became flexible and soft with the increase of fatigue. 2. The hand value and THV; except anterior knee from all part of KOSHI, NUMERI, FUKURAMI was decreased. 3. The fatigue phenomenon of hand value was different on the position of clothing; on the position of hip, rate of B, G smaller than other parts and KOSHI was decreased, on the part of anterior thigh was FUKURAMI was increased, on the anterior knee RC, NUMERI, THV was increased, on the posterior knee was 2HB, 2HG, 2HGS showed increasedgreater than any other part and on the hem of back, MMD was increased, but NUMERI was decreased. 4. The changing process of mechanical properties in the simulation testing by the fatigue tester has similar tendency to that of the wearing tester. It is concluded that this testing method is useful to predict the fatigue phenomena of fabrics caused by wearing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.431-442
• /
• 2008

This study was to research the characteristics of the somatotype of Korean farmers. 836 Korean farmers(Male: 361 persons, Female: 475 persons) volunteered for this study. They volunteered from 9 different area such as Kumi, Damyang, Iksan, Injae, Chungju, Choongju, Haman, Whasung, and Whasoon. The reusults were as follows: 1. The subcutaneous body fat thickness were decreased as they aged(p<.05). 2. The thicker the subcutaneous body fat thickness of Korean farmer, the wider the circumference size by the Korean famer's physical parts(p<.05-p<.001). 3. There were no significant differences in the circumference size such as upper arm, chest, bust, waist, umbilical waist, hip, and calf between Korean farmers and Korean standard size. 4. Korean women farmer showed significantly differences in the upper arm circumference(p<.01), the chest circumference(p<.01), the bust circumference(p<.01), the waist circumference(p<.01), the umbilical waist circumference(p<.01), and the calf circumference(p<.05) from Korean women standard by ages. Especially, Korean women farmer had thicker the umbilical waist circumference(the 40's: 103.2mm, the 50's 52.3mm, the 60's 22.3mm, over 70's 22.1mm) than Korean women standard. 5. The 40's women farmer had thicker the upper arm circumference, the chest circumference, the bust circumference, the waist circumference, the umbilical waist circumference, and the calf circumference than Korean women standard. The 70's women farmer had skinner circumferences except the umbilical waist circumference than Korean women standard. 6. Korean farmers showed the crooked back shape, the broad-knee length and also front-bending knee shape as they aged.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.707-714
• /
• 2004

This study was carried out to research the actual condition of narrator models' wearing uniform, targeting on the narrator models who are being currently active and are from 19-year-old to 30-year-old. A poll was performed through visiting internet circles and spots, and the characteristic of objects, the form of uniform, attitude on uniform, dissatisfaction index on wearing uniform and preference index on wearing uniform were researched. It was carried out from August 18, 2003 to August 31, 2003. In order to perform this study, 161 questionnaires were used in all, and frequency analysis was implemented using SPSS 10.0. The objects of study were composed of female. Those who are from 21-year-old to 25-year-old accounted for 74.5%, and those who have career from 2 years to 3 years accounted for 75.5%. In respect to attitude on wearing uniform, affirmative answers, affirmative answers, such as a sense of belonging, a pride in activity and increase of efficiency, accounted for 68.8%. On the other hand, in respect to a harmonization between uniform and work, just the 39.8-percent showed affirmative reaction. Concerning the functionality of uniform, such as retaining warmth and ventilating, dissatisfaction index showed very high value; it is judged that it should be improved henceforth. Working postures were researched, following the order of standing posture and arm-using posture. In inconvenient actions, bending down and moving arms were orderly pointed out. With regard to the dissatisfaction of size, busts, the length of skirt and waist girth were orderly pointed out. Likewise, considering the parts of which room is required, bust, hip girth and waist girth were orderly pointed out. As to the points that should be bettered, design and functionality were orderly pointed out. In respect to materials of uniform, sweat-absorption material, light material and well-ventilated material were orderly suggested.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.45-56
• /
• 2009

The purposes of this study were to investigate the relationships between the degree of physical pain and the knowledge and preventive actions of musculoskeletal diseases among dental hygiene students with a potential risk of contracting those diseases and thus to help them prevent them. A survey was taken among 207 sophomores and juniors specializing in dental hygiene at S1 and S2, Gyeonggi Province in the area of physical pain, knowledge of musculoskeletal diseases, and preventive actions against them. The findings were as follows: 1. The mean scores of the sophomore in the knowledge of musculoskeletal diseases were $6.20{\pm}2.21$, and those of the juniors were $6.72{\pm}2.29$. The mean scores of the sophomores and juniors in the preventive actions against musculoskeletal diseases were $22.50{\pm}2.37$ and $22.29{\pm}3.01$, respectively. 2. The subjects displayed severe physical pain in the lower back, shoulder, and neck in the descending order and medium physical pain in the neck, shoulder, and lower back in the descending order. 3. The higher level knowledge of musculoskeletal diseases they had, the less physical pain they felt. And there were significant differences among the shoulder, lower back, hip, ankle, and foot. 4. There were relationships between physical pain and the preventive actions against musculoskeletal diseases in "placing the hands at the height of the elbows during treatment", "reducing such positions as bending and extending during treatment", "narrowing the distance with the patient", "taking regular breaks during treatment for recovery", "trying not to incline the neck, back, arm, and wrist as much as possible", and "trying to keep the torso in the neutral position." 5. As for the education about musculoskeletal diseases, 74 sophomores(88.10%) and 102 juniors(89.74%) answered they received no such education. The results suggest that there should be some instructions to help dental hygiene students practice the preventive actions against musculoskeletal diseases and further prevention programs against those diseases.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.81-86
• /
• 2016

The purpose of this study was to investigated the muscle activity difference of lower extremity by abdominal co-contractive activation. 30 healthy women without pain in the low back and lower extremity were conducted. Muscle activities of lower extremity were measured with the active straight leg raise (ASLR) in 20cm raised from the floor without bending the knee at rest, abdominal drawing-in maneuver (ADIM) and abdominal bracing maneuver (ABM), respectively. Hip adductor longus (HadL), rectus femoris (RF), and biceps femoris (BF) muscle activity in the Abdominal bracing maneuver were statistically significantly higher, also gluteus medius (Gmed) and tibialis anterior (TA) muscle activity in the ADIM were higher. We provide the evidence to the positive effects of individual abdominal co-contractive activation training which can enhance postural stability and lower extremity strengthening with volitional preemptive abdominal contraction.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.245-255
• /
• 2009

The purpose of this study is to analyzed the coordination of lower limb of elderly women who experienced a fall to present basic information for sports science and to deal with the factors that make elderly women fall more effectively. Twenty elderly women were divided into two groups of 10. The mechanisms of balancing lower limb during walk and differences were compared and analyzed using motion analysis and electromyography. The findings of this study are as follows. The first, walking patterns of these women were unstable as their hip joints did not provide sufficient support because of aging. Second, the left and right knee joints showed different walking patterns. The third, the motions of ankle joints became abnormal with increased age. As for the activation of major lower limb muscles, rectus fermois muscle and biceps fermois muscle contracted more to prevent the bending of knees and moved forward while anterior tibial muscle and inner gastrocnemius muscle were demanded highly during walk and the rate of plantar flexion was reduced.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.397-402
• /
• 2018

Proper seat design is critical to the safety, comfort, and ergonomics of automotive driver's seats. To ensure effective seat design, quantitative methods should be used to evaluate the characteristics of automotive seats. This paper presents a system that is capable of simultaneously monitoring body pressure distribution and surface deformation in a textile material. In this study, a textile-based capacitive sensor was used to detect the body pressure distribution in an automotive seat. In addition, a strain gauge sensor was used to detect the degree of curvature deformation due to high-pressure points. The textile-based capacitive sensor was fabricated from the conductive fabric and a polyurethane insulator with a high signal-to-noise ratio. The strain gauge sensor was attached on the guiding film to maximize the effect of its deformation due to bending. Ten pressure sensors were placed symmetrically in the hip area and six strain gauge sensors were distributed on both sides of the seat cushion. A readout circuit monitored the absolute and relative values from the sensors in realtime, and the results were displayed as a color map. Moreover, we verified the proposed system for quantifying the body pressure and fabric deformation by studying 18 participants who performed three predefined postures. The proposed system showed desirable results and is expected to improve seat safety and comfort when applied to the design of various seat types. Moreover, the proposed system will provide analytical criteria in the design and durability testing of automotive seats.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.137-146
• /
• 2008

The purpose of this study is to examine the causes of errors from EGR posture on the balance beam, which is bending flick-flack salto backward stretched national team players through kinematic analysis, and present training methods for them so as to provide scientifically useful information to coaches and athlete. Findings from this study are summarized below. The most important factors that affect the errors in boyd center position and speed change were the speed change of left and right body centers and the horizontal and vertical speed changes. The left and right acceleration changes were greater in failed posture than in successful posture. The horizontal and vertical accelerations in E3 and E5 were the key factors that affected the backward somersault and landing. The angular speed changes which varied between success and failure were notable in head and shoulder joints. In individual results. The section when the angular speeds of head and shoulder joint must be the greatest was E4. In this section, when the body is extending instantly in a bent posture, increasing the angular speeds of head, shoulder and hip joints can improve the duration of staying in the air and the rotation radius of a somersault.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.61-69
• /
• 2008

The purpose of this study is to examine the success or failure on the balance beam in element group requirements posture which is bending salto side-ward tucked through kinetic analysis. The national team players were participated. The goal was to present training methods to coaches and athletes so as to provide scientifically useful information. The results from this study were summarized as below. When the performance was successful, the features of the body's center of gravity during the side somersault motion showed to spread from the center of the balance beam and the center of the gravity moved to the direction of the body's rotation. In the spring sections - event2 and 3, when the performance was successful, up/down fluctuation became more wider and increased air time. It supported the result that the projecting variable was higher than in failure trial. In addition, the right side hip joint angles and speed, and angular velocity as jumping up for a leap were larger than in failure trial. Those variables showed the optimal conditions for a leap. By increasing the speed of the upper limb from the shoulder and the speed of the shoulder joint angular velocity, the momentum was increased. Especially the right side shoulder joint angular velocity increased dramatically because the right leg was held. As to the side somersault motion, the angular momentum of successful trial with respect to x-axis was bigger than failed trial. It indicated that the increasing angular momentum with respect to x-axis was an important factor in flying motion. Besides, as to side somersault, the appropriate proportion of angular momentum with respect to y-axis and z-axis was a key to successful trails.