• Physical Therapy Korea
• /
• v.28 no.2
• /
• pp.123-131
• /
• 2021

Background: Only 2% of falls in older adults result in serious injuries (i.e., hip fracture). Therefore, it is important to differentiate injurious versus non-injurious falls, which is critical to develop effective interventions for injury prevention. Objects: The purpose of this study was to a. extract the best features of surface electromyography (sEMG) for classification of injurious falls, and b. find a best model provided by data mining techniques using the extracted features. Methods: Twenty young adults self-initiated falls and landed sideways. Falling trials were consisted of three initial fall directions (forward, sideways, or backward) and three knee positions at the time of hip impact (the impacting-side knee contacted the other knee ("knee together") or the mat ("knee on mat"), or neither the other knee nor the mat was contacted by the impacting-side knee ("free knee"). Falls involved "backward initial fall direction" or "free knee" were defined as "injurious falls" as suggested from previous studies. Nine features were extracted from sEMG signals of four hip muscles during a fall, including integral of absolute value (IAV), Wilson amplitude (WAMP), zero crossing (ZC), number of turns (NT), mean of amplitude (MA), root mean square (RMS), average amplitude change (AAC), difference absolute standard deviation value (DASDV). The decision tree and support vector machine (SVM) were used to classify the injurious falls. Results: For the initial fall direction, accuracy of the best model (SVM with a DASDV) was 48%. For the knee position, accuracy of the best model (SVM with an AAC) was 49%. Furthermore, there was no model that has sensitivity and specificity of 80% or greater. Conclusion: Our results suggest that the classification model built upon the sEMG features of the four hip muscles are not effective to classify injurious falls. Future studies should consider other data mining techniques with different muscles.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.145-153
• /
• 2007

The purpose of this study is to compare and analyze the phase-by-phase elapsed time, the COG, the body joint angle changes and the angular velocities of each phase of Handspring Salto Forward Piked performed by 4 college gymnasts through 3D movement analysis program. 1. The average elapsed time for each phase was .13sec for Phase 1, .18sec for Phase 2, .4sec for Phase 3, and .3sec for Phase 5. The elapsed time for Phase 1 to Phase 3 handspring was .35sec on average and the elapsed time for Phase 4 to Phase 5 handspring salto forward piked was .7sec on average. And so it showed that the whole elapsed time was 1.44sec. 2. The average horizontal changes of COG were 93.2 cm at E1, 138. 5 cm at E2, 215.7 cm at E3, 369.2 cm at E4, 450.7 cm at E5, and 553.1 cm at E6. The average vertical changes of COG were 83.1 cm at E1, 71.3 cm at E2, 78.9 cm at E3, 93.7 cm at E4, 150.8 cm at E5, and 97.2 cm at E6. 3. The average shoulder joint angles at each phase were 131.6 deg at E1, 153.5 deg at E2, 135.4 deg at E3, 113.4 deg at E4, 39.6 deg at E5, and 67.5 deg at E6. And the average hip joint angles at each phase were 82.2 deg at E1, 60 deg at E2, 101.9 deg at E3, 161.2 deg at E4, 97.7 deg at E5, and 167 deg at E6. 4. The average shoulder joint angular velocities at each phase were 130.9deg/s E1, 73.1 deg/s at E2, -133.9 deg/s at E3, -194.4 deg/s at E4, 29.4 deg/s at E5, and -50.1 deg/s at E6. And the average hip joint angular velocities at each phase were -154.7 deg/s E1, -96.5 deg/s at E2, 495.9 deg/s at E3, 281.5 deg/s at E4, 90.3 deg/s at E5, and 181.7 deg/s at E6. The results shows that, as for the performance of handspring salto forward piked, it is important to move in short time and horizontally from the hop step to the point to place the hands on the floor and jump, and to stretch the hip joints as much as possible after the displacement of the hands and to keep the hip joints stretched and high in the vertical position at the takeoff. And it is also important to bend the shoulder joints and the hip joints fast and spin as much as possible after the takeoff, and to decrease the speed of spinning by bending he shoulder joints and the hip joints quickly after the highest point of COG and make a stable landing.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.249-253
• /
• 2014

PURPOSE: This study intends to examine the effects of change of anatomical position of the ankle joint in open kinematic chain, an appropriate position for selective muscle training, on vastus lateralis obliques, rectus femoris, vastus medilais obliques, and rectus abdominalis muscle activation and to present an effective method of muscle training for patients and normal people. METHODS: The participants of this study were Korean healthy adult in their 20s. The 8 channel surface electromyography was used to measure muscle activation while the subjects raised their legs under each condition. Under each condition, while the subjects raised the leg to hip joint flexion at $60^{\circ}$ along the arch. RESULTS: The analysis result of muscle activation by each section and position during leg rising. There were significant differences. CONCLUSION: For independent strengthening of each muscle, muscle activation was measured according to leg raising angles and the result differed according to each section and position. If this study result is applied to muscle training for patients who need selective muscle training, more effective muscle strengthening will be made possible.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.63-76
• /
• 2003

This research was performed to compare spinal segment motion angle between low back pain (LBP) group and painless group during trunk flexion-extension and to investigate the effect of transversus abdominis strengthening exercise on spinal segment motion angle in LBP group. Nine subjects with LBP and ten subjects without LBP participated. Transversus abdominis strengthening exercise was performed in LBP group for three weeks, and spinal segment motion angles were compared before and after the exercise performance. Spinal segment motion angles were measured both in sitting and standing position. Results were as followed: 1) Subjects' average age was 24.79 years, height was 167.84 cm, and weight was 59.95 kg. 2) Spinal segment motion angle of T10/l1 was significantly higher in LBP group compared with painless group (p<.05) in sitting position during trunk flexion-extension. 3) In sitting position, whereas entire lumbar segment motion angles were lower in LBP group compared with painless group (p<.05), angle of L4/5 was higher in LBP group compared with painless group (p<.05). 4) There was no significant difference in thoracic segment motion angle in standing position. 5) After three weeks of transversus abdominis strengthening exercise, thoracic segment motion angle increased both in sitting and standing position (p<.05). 6) In painless group, there was no significant difference in entire spinal segment motion angles in sitting and standing position (p>.05). When spinal segment motion angles were compared between sitting and standing position, there were slight differences. In sitting position, there was no difference in spinal segment motion angle between LBP group and painless group while hip joint motion angle and sacral inclination angle of LBP group was lower than those of painless group (p<.05). In standing position, lumbar segment motion angle was significantly lower in LBP group than that of painless group. Transversus abdominis strengthening exercise influenced thoracic segment motion angle more significantly than lumbar segment motion angle.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.207-218
• /
• 2017

This study evaluates the difference in visual images according to changes in waist position and pants style. The researcher made twelve stimuli-combination of four pants styles (classic, baggy, skinny, bell-bottom) and three waist positions (0cm, -3cm, -5cm). The test involved 48 female college students. The stimuli were made using the i-Designer computer program. The panels tested the screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, the ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. The visual evaluations by pants style and waist position are composed of seven factors (attractiveness, attention, hip, activity, height, waist, abdomen). Among these factors, attractiveness is evaluated to be the most important factor. The mutual agreement of the visual effect (according to pants style and waist position) was indicated as four factors of attractiveness, attention, waist, and abdomen. The height factor is evaluated to be the most important factor by change in regards to waist position. The 0cm waist position of three styles (classic, baggy, bell-bottom) were evaluated positively in elongated height whereas the -3cm, -5cm waist position of the skinny style was evaluated positively in elongated height. The mutual agreements of visual effect (according to pants style and waist position) were not indicated.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2887-2890
• /
• 2003

This paper describes the possibility of analyzing gait pattern from the variation of the lower leg electrical impedance. This impedance is measured by the four-electrode method. Two current electrodes are applied to the thigh, knee, and foot, and two potential electrodes are applied to the lateral, medial, and posterior position of lower leg. The correlation coefficients of the joint angle and the impedance change from human leg movement was obtained using electrogoniometer and 4ch impedance measurement system developed in this study. We found the optimal electrode position for ankle, knee and hipjoint movements based on high correlation coefficient, least interference, and maximum magnitude of impedance change. The correlation coefficients of the ankle, knee, and the hip movements -0.87, 0.957 and 0.80. respectively. From such features of the lower leg impedance, it has been made clear that different movement patterns exhibit different impedance patterns and impedance level. This system showed possibility that lower leg movement could be easily measured by impedance measurement system with a few skin-electrodes.

• The Journal of Korean Physical Therapy
• /
• v.14 no.1
• /
• pp.125-130
• /
• 2002

This study was applied using vojta therapy in the patient with hydrocephalus occurred by on traumatic brain injury. Vojta treatment was a recently developed of the brain damage patient treatment which can be applied eariler than the other traditional methods. The results were as follows. 1. Hip joint flexion contracture from $100^{\circ}$ to $15^{\circ}$ was improved on prone position. 2. Left convexity curve on thracolumbar region due to functional scoliosis the normal aligment. 3. The thumb finger was changed from thumb-in to thumb-out. 4. Right tilted pelvis on prone position became the normal symmetry

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.134.2-134
• /
• 2001

This paper treats the implementation of a statically stable control system for a biped walking robot with 10 degrees-of-freedom. Statically stable walking of a biped robot can be realized by keeping the center of mass (COM) inside the sole of the supporting foot (or feet) during single-support or double-support phases. We predetermined five static positions for walking based on the COM method. The positions can be represented by the length of the gait, the width between the feet, the height of the foot and two parameters in the hip movement. With the five parameters, we calculated the position trajectory. And we got the angular trajectories of 10 joints from the posit ion trajectory using the position tracking control and neural network. By tracking the angular trajectories, the robot can walk maintaining stability. We implemented walking of a biped robot throught the above ...

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1344-1353
• /
• 2006

The purpose of this research is to investigate the actual wearing conditions of working uniform and identify problems for the aircraft mechanic. For this study, questionnaire surveys were conducted dividing according to styles of clothing; one-piece and two-piece styles. Subjects were 343 men working in flight line. Questionnaire of 159 two-piece styles and 184 one-piece ones were used in analysis. The results of the study are as follows; The result about wearing each type of working uniform showed that the two-piece one is always as the air force uniform, whereas the one-piece one is worn only a few times. They felt inconvenience during all operations except in the sitting position, crawling position, and positions in which they were using tools. Accordingly, the result of the functionality reported dissatisfaction on all question items. Therefore, uniform of two-piece style achieved better results on all questions related to motional flexibility and functionality. Questions on changes to finishing methods showed that each airline employed different methods for both two-pieced and one-pieced uniforms. The answers about the unstitched or worn-out parts of the two-piece garments showed that pants were unstitched on the inner seam of the trouser leg and hip regions, but the upper one was not. In case of the one-pieced uniform, the parts of wearing out is the seam of hip and the unstitched parts are knee region and hem line of pants. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly in its ventilation and absorbency. Questions concerning the preferred design of working uniform indicated a preference for two-piece uniform rather than one-piece ones.