• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.295-299
• /
• 2000

The photoluminescence and cathodoluminescence of $SrGa_2S_4:EU$ phosphor were optimized with the process and chemical variables (activators, fluxes and reaction temperature) used in solid state reaction. Firing the powder with flux at $800^{\circ}C$ for 2hr gave the highest photoluminescence efficiency under near-UV excitation and the highest cathodoluminescence efficiency of 20.1 lm/W at 2 kV and 33.3 lm/W at 10 kV. The suitability of $SrGa_2S_4:EU$ for application as a phosphor in LCDs and FEDs is discussed.

• 복식문화연구
• /
• 제17권5호
• /
• pp.746-757
• /
• 2009

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.

• 해양환경안전학회지
• /
• 제23권2호
• /
• pp.161-167
• /
• 2017

본 연구는 3개의 투입변수와 3개의 산출변수로 구성된 DEA법을 이용하여 우리나라 항만의 노무효율성을 측정 평가하였다. 대상항만의 전체 기술적 효율성은 평균 94.18% 수준이었으며, 순수 기술적 효율성은 100%로 나타났고 규모의 효율성은 94.18%로 전체 기술적 비효율성이 가장 높게 나타났다. 분석결과 7개의 항만은 효율적인 항만으로 측정되었고 4개의 항만은 비효율적 항만으로 측정되었다. 4개의 비효율적 항만중 규모에 대한 수익체증은 동해항으로 나타났다. 그러나 비효율적인 항만들은 생산규모의 비효율성보다 자원운영의 비효율성이 높은 것으로 나타났다. 한편 초효율법을 이용하여 효율적인 항만의 우선순위를 분석한 결과 인천항, 목포항, 평택당진항, 마산항, 여수광양항, 제주항, 군산대산항 순으로 효율성이 높은 것으로 나타났다. 특히 비효율적인 부산항은 목포항 및 인천항을 벤치마킹하여 항만 물동량의 증대, 장비의 현대화 및 노무효율성의 향상을 위해 전면적인 노무상용화가 필요하다.

• 한국초지조사료학회지
• /
• 제23권1호
• /
• pp.59-64
• /
• 2003

국내육생 품종인 Hapsung 2, Jangbeol 101, Jangbeol 102와 대비품종인 Potomac의 종자로부터의 캘러스 형성율, 캘러스 크기, 식물체 재 분화율 및 재분화 효율을 4주령 및 6주령의 캘러스에 대하여 조사한 결과는 다음과 같다. 캘러스 형성율은 4주령 캘려스에서는 Jangbeol 102가 가장 높았고, 6주령 캘러스에서는 대비 품종인 Potomac아 가장 높았다. 캘러스 크기는 4주령 캘러스에서 대비품종인 Potomac (3.93cm)이 가장 컸으며, 6주령 캘러스에서는 Jangbeol 101 (4.32cm)이 가장 컸지만, 품종간의 차이는 적은 편이었다. 식물체 재분화율운은4주령 캘러스에서 10.3~17.7%의 넓은 범위의 차이를 보였는데, Jangbeol 101이 가장 높았으며 6주령 캘러스에서도 역시 11.2~37.4%로서 품종간에 큰편차를 보였으며, 특히 대비품종인 Potomac은 월등하게 재분화율이 높았다. 식물체 재분화 효율은 4주령 캘러스에서 그 범위가 6.8~11.5%로서 Jangbeol 102가 가장 높았으며, 6주령 캘러스에서는 범위가 7.2~25.6%로서 Potomac이 가장 높았다.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1571-1580
• /
• 2013

본 연구는 경기도내 31개 시군에서 운행되고 있는 택시의 서비스에 대한 만족도를 기초로 지역별 택시의 효율성을 평가하였다. 효율성 평가는 개인택시와 법인택시로 구분하여 분석하였다. 시 군별 효율성 평가는 DEA(Data Envelopment Analysis) 모형을 이용하였다. 본 연구에서 사용한 자료는 경기도 31개 시 군의 개인 및 법인택시를 대상으로 조사한 자료이다. 31개 지자체의 효율성 평가 결과를 살펴보면, 개인택시의 경우 효율적인 지자체는 평택시, 포천시, 오산시, 양평군, 가평군 등 5개 지자체로 나타났다. 법인택시는 평택시, 포천시, 오산시, 가평군 등 4개 지자체이다. 이들 지자체들은 일정한 수준의 만족도를 생산함에 있어서 다른 지자체보다 적은 양의 서비스를 사용하는 능력을 확보하고 있음을 의미한다. 개인택시와 법인택시간 DMU들의 통계적 차이가 있는지를 검증하기 위하여 순위합검증(Rank-sum Test)을 시행한 결과 두 집단 간에 서비스제공에 따른 만족도 차이는 없는 것으로 분석되었다.

• 한국토양비료학회지
• /
• 제49권1호
• /
• pp.66-74
• /
• 2016

Environmental pollution from abandoned metal mines has been awarded as serious problem and many techniques have been applied to remediate pollutants. Main objective of this research was to evaluate efficiency of heavy metal sorption capacity of spent mushroom media (SMM) in aqueous and soil matrix. Laboratory batch experiment was conducted and 4 different heavy metals (Cd, Pb, Cu, Zn) were evaluated. In aqueous phase, all 4 heavy metals showed high reduction efficiency ranged from 60-99% and Pb showed the highest sorption efficiency. In case of soil phase, much lower sorption efficiency was observed compared to aqueous phase. The highest reduction efficiency was observed in Cd (average of 38%). With scanning electron microscopy energy dispersive detector (SED-EDS) analysis, we confirmed sorption of heavy metals at the surface of SMM. Overall, SMM can be used as sorption materials for heavy metals in both aqueous and soil matrix and more research should be conducted to increase sorption efficiency of SMM in soil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1029-1032
• /
• 2004

This paper investigates that how diffraction efficiency is going to change according to amorphous As-Ge-Se-S. We made films such as $\lambda$, $\lambda/2$, $\lambda/4$, $\lambda/8$ on the basis of 633nm, which is wavelength of recording laser(He-Ne). Among them, $\lambda/4$ has the highest diffraction efficiency value, while $\lambda/8$ has the lowest. The experiment shows that the highest diffraction efficiency value of $\lambda/4$ is about 0.09%, whereas diffraction efficiency of $\lambda/8$ is formed, which is merely close to 0%.

• 한국태양에너지학회 논문집
• /
• 제37권3호
• /
• pp.33-45
• /
• 2017

Crystalline silicon photovoltaic module certification began in 2007. "Renewable Energy Equipment Certification Scheme" was implemented until July 28, 2015. Then, the scheme was changed to "KS Certification Scheme" since July 29, 2015. A total of 2,331 models have been certified by 2016. The proportion of multi crystalline modules in certified products is higher than that of mono crystalline modules, and Korean modules account for 78% of the total certification modules. Chinese solar cells account for the highest percentage of 40% of the total modules and 62.4% of modules certified in 2016 use Chinese solar cells. With the development of technology, module power is continuously increasing, and efficiency is also rising. The average efficiency of mono crystalline module is 0.74% higher than the average of multi crystalline module. As a result of comparing domestic module with Chinese module, the highest efficiency of mono crystalline module and multi crystalline module and the average efficiency of mono crystalline module are higher than those of Chinese module, but the average efficiency of multi crystalline module is similar to that of Chinese module.

• 한국임상수의학회지
• /
• 제20권1호
• /
• pp.121-130
• /
• 2003

The purpose of this study was to investigate the effect of breeding conditions on reproductive efficiency of thoroughbred broodmares by ultrasonography. The mean age and breeding career of 120 mares used in this study were 11 years old and 6 years, respectively. The average pregnancy rate and embryonic loss rate were 87.5%, 11.8%. The groups that were 8-10 years old, 4-6 years, maiden and mated on May showed the highest pregnancy rate. While mares mated on 1st estrus post partus had the highest ovulation rate but showed the highest embryonic loss rate and he lowest pregnancy rate. And broodmares that had more intrauterine foreign bodies such as cyst and fluid with age and breeding career had represented lower pregnancy rate and higher embryonic loss rate than those having normal uterine condition. These results suggest that the breeding condition and uterine environment of mares had a significant influence on reproductive efficiency.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.52-57
• /
• 2002

The Decomposition of NO$_2$ (nitrogen dioxide), one of the Hazardous Air Pollutant (HAP), was studied by utilizing the SPCP (Surface induced discharge Plasma Chemical Processing) reactor so as to obtain optimum process variables and maximum decomposition efficiencies. Experimental results showed that for the frequency of 10kHz, the highest deco position efficiency of 84.7% for NO$_2$ was observed at the power consumptions of 20W. The decomposition efficiency of $NO_2$ was found to be: 1) proportional to the residence times, and inversely proportional to the initial concentrations of $NO_2$; 2) the maximum when the electrode diameter was 3mm; 3) influenced by the electrode material, decreasing in the order of W>Cu>Al; and 4) proportional to the $CH_4$ content, due to which the highest efficiency of 98% was obtained with almost all the $NO_2$ removed.