• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.201-212
• /
• 2017

This study presented the new evaluation index which can evaluate the discrimination of DEA models. To evaluate the discrimination of DEA models, data were analyzed using importance index as suggested in previous study and the coefficient of variation as suggested in this study for the discrimination evaluation. This study selected the CCR-DEA, BCC-DEA, entropy, bootstrap, super efficiency, and cross efficiency DEA model for the discrimination evaluation and accomplished empirical analysis. In order to grasp the rank correlation of the models, this study implemented the rank correlation analysis between the efficiency of CCR model and BCC model and entropy, bootstrap, super efficiency, and efficiency of the cross efficiency model. The obtained results of this study are as follows. First, the discrimination rank of models using the importance index and the coefficient of variation was shown to be identical. Therefore, the coefficient of variation can be used the discrimination evaluation index of DEA model. Second, the discrimination of the super efficiency model was found to be the highest rank among 4 models according to the analysis of this present study. Third, the highest rank correlation with CCR model was the super efficiency model. In addition, the super efficiency model was found to be the highest rank correlation with BCC model.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1311-1317
• /
• 2021

In this study, an airborne alpha detection system, which consists of a passivated implanted planar silicon (PIPS) detector and an air filter, was developed. A collimator applied to the alpha detection system showed an enhancement in resolution and a degradation in detection efficiency. The resolution and detection efficiency were compared and analyzed to evaluate the performance of the collimator. Thus, the resolution was found to be more important than the efficiency as a determining factor of the detection system performance, from the viewpoint of radionuclide identification. The performance was evaluated on three properties of the collimator: hole shape, hole length, and the ratio between the hole and frame pitches. From the hole shape performance evaluation, a hexagonal collimator showed the highest resolution. Further, the collimator with a hole pitch of 14 mm was found to have the highest resolution while that with a frame pitch of 4-6 mm (i.e., 1.2-1.4 times longer than the hole pitch) showed the highest resolution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.209-215
• /
• 2013

DSSCs electrical characteristics and efficiency fabricated with different tape casting thickness Pt counter electrodes and different thickness between $TiO_2$ photo electrode and Pt counter electrode substrate were studied. 1 layer Pt counter electrode shows 3.979% efficiency. Efficiency increased as tape casting thickness decreased. The lowest open-circuit voltage was a 0.726 V and the highest short-circuit current was a 2.188 mA on 1 layer Pt counter electrode. On the different thickness between two substrates, the lowest open-circuit voltage 0.712 V and the highest short-circuit current 2.787 mA was measured at $60{\mu}m$ surlyn film thickness and it shows the highest value of 5.067% efficiency.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.3-10
• /
• 2006

In this study, the of MBBR(moving bed biofilm reactor) process for Phosphorus Removal efficiency depending on seasons and the factors affecting phosphorus removal efficiency in the process is evaluated. As a result of experiment, T-P removal efficiency has its highest value in winter, (80.8%). and T-P removal efficiency has its lowest value in autumn, (49%). Optimum SRT for Phosphorus Removal revealed is about 8.8 days and process performs more efficiently as the temperature decreases. It is accepted that nitrate to anaerobic zone is affecting the Phosphorus removal process. With increasing the organic loading rate, Phosphorus removal efficiency also increases. Also, an experiment has been conducted to find out the highest efficiency according to Media existence and it has revealed that Media addition provides better phosphate removal.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.93-100
• /
• 1999

Decomposition efficiency, power consumption, and applied voltage of CFC(Chlorofluorocatbon) were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of CFC-12 with various electric frequencies(5~50kHz). flow rates (100~1,000mL/min), initial concentrations(100~1,000ppm), electrode materials(W, Cu, Al). electrode thickness(1, 2, 3mm) and reference gases($N_2$, $O_2$, air) were measured and the products were analyzed with FT-IR. Experimental results showed that at the frequency of 10kHz, the highest decomposition efficiency of 92.7% for CFC-12 were observed at the power consumptions of 29.6W. respectively, and that decomposition efficiency decreased with increasing frequency above 20kHz and decomposition efficiency per unit power were 3.13%/W for CFC-12. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3m. As the electrode material, decomposition efficiency was in order that tungsten(W), copper(Cu), aluminum (Al). Decomposition of CFC-12 in the reference gas of $N_2$ showed the highest efficiency among three reference gases, and then the effect of reference gas on the decomposition efficiency decreased in order of air and $O_2$. The optimum power for the maximum decomposition efficiency was 25.3W for CFC.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.293-304
• /
• 2015

This study examined the factors which have influence on the welfare facilities for the elderly and analyzes their efficiency. It investigated theoretical studies and preceding studies and divided the efficiency evaluation factors into input and output factors. Input factors included budget, the number of workers and clients and facility area and output factors were operation management, the number of clients, profitability and welfare for the elderly. To sum up the analysis results of evaluation factors of welfare facilities for the elderly, the analysis of relative importance of input showed that budget was most important. As a result of analyzing the relative importance among detailed items, balance sheet and professional manpower were highest. Input factors by facility types showed that the budget for utility facilities and living facilities were highest. In output factors, utility facilities and living facilities were highest in management systematization and welfare for the elderly, respectively. In efficiency evaluation, utility facilities for the elderly showed 100% of efficiency in CCR and BCC models. In welfare facilities for the elderly, while CCR model showed 100% of efficiency in facility types A, C, D, and F, the efficiency was low in facility B (79.89%), E (77.14%), and G (80.72%). In BCC model, facility E was low as 78.69%. In efficiency comparison between utility facilities and living facilities for the elderly welfare, the efficiency of utility facilities for the elderly welfare was higher. Therefore, this study investigated the efficiency of welfare facilities for the elderly as its main purpose and presented policy suggestions based on the research results as the alternative.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1366-1371
• /
• 2011

The resonant converter cause the high voltage stress according to the input voltage, which increases the conduction loss in converter power switches. The topology of LLC half bridge resonant converter provides ZVS characteristic and also the stress of voltage and current is smaller than that of the general resonant converters. So we can expect the higher efficiency. In this paper, the analysis of the characteristics of the converter efficiency and the best conditions for highest efficiency were investigated. As a result, the efficiency of utilizing up to 93% is achieved.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.203-209
• /
• 2018

This study analyzed the employment efficiency of Korean colleges and universities using DEA(2015 GOMS), which was surveyed by the Ministry of Employment and Labor and the Korea Employment Information Service. The input variables were employment program participants, language educators, family economic applicants, and employment targets. As a result, the college was more efficient than the college and the college was relatively ineffective. The contribution of input and output contributed the highest efficiency with 99.9% of the participants in the employment program, and the possibility of improving the efficiency of the language educator was the highest at 70.04. Based on the results of the above research, it suggests the necessity of activation of employment programs and activation of language training in each university. Future studies will need to study the efficiency of universities nationwide.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.129-151
• /
• 2010

This study is to analyze the efficiency of Korean fishing ports using DEA. First, the study calculated the efficiency scores based on a CCR-BCC framework and hence technical, pure technical, and scale efficiency scores are seperated for the 38 fishing ports under study. The Average of technical, pure technical, and scale efficiency are turned out to be 0.6834, 0.8582, and 0.7774 respectively. The 15 fishing ports are fully efficient under the constant returns to scale while 21 fishing ports under the variable returns to scale. Second, the super efficiency scores are also calculated under the radial model without the consideration of slacks. The highest score is turned out to be 4.4984 for the P16 fishing port with the average score of 0.9652 for the entire fishing ports. Nevertheless, P16 fishing port has showed up only once as a reference set. On the other hand, P34 fishing port has showed up 11 times as a reference set, which scored the second highest score of 2.9815. Finally the super efficiency scores are calculated under the non-radial model with the explicit consideration of slacks. Now the P34 fishing port scored the highest score of 2.3424 with even 15 times referred to a bench-mark. Therefore the importance of P34 fishing port is emphasized once again on the field of bench-marking for the efficiency of fishing ports. When the targets for the input factors to improve the efficiency of each DMU are calculated the area of fishing port needs the most adjustment to be reduced for 40.36% on the average, while the cosignment sales area does the least adjustment for 13.70%.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.49-57
• /
• 2000

This study was carried out to find the optimal condition to treat refractory organic matter which can’t treat clearly with biological treatment and to find the optimal division dosage and division dose timing in the modification of Fenton oxidation which is used resolve the problem that hydrogen peroxide is too expensive. The results are following; 1. The highest TOC removal efficiency was 41% and color removal efficiency was 64% when the dilution magnitude of leachate is fold. This suggests that dilution is efficiency when high concentration of leachate is treated. 2. The removal efficiency of TOC and color increased up to the molar ratio between ferrate and hydrogen peroxide was 1:1. However above that ratio, removal efficiency hardly increased. The highest removal efficiency of TOC and color were 38% and 71% when the mole ratio of ferrate to hydrogen peroxide was 1.5:1. 3. When the mole ratio between ferrate and hydrogen peroxide was fixed, the removal efficiency of TOC and color increased as the dosage of hydrogen peroxide increased. 4. pH of samples were adjusted at pH 3, 5, 7, 9, 11. After oxidation reaction, pH of samples were dropped to 2.59, 2.54, 5.34, 6.36 and 9.68. The highest color removal efficiency was 75.7% when initial pH was at pH 7. 5. The removal of TOC and color was ended within 10. min. and the removal efficiency increased logarithmically within 10min. However after 10 min., the removal efficiency of hardly increased. 6. The color removal efficiency was higher with modification of fentone oxidation than that with fentone oxidation by 5%. Optimal division dosage ratio was 1:1 and optimal dose timing ratio was 2:1. However the TOC removal efficiency was not higher with modification of Fenton oxidation than that with Fenton oxidation.7. The CO $D_{Mn}$ /BO $D_{5}$ Ratio decreased with the time went by. It meant bioresolution increased as time went by. However, after 15 min., the CO $D_{Mn}$ /BO $D_{5}$ Ratio did not decrease any more. 8. In the case of $H_2O$$_2$ Divisiom Dose experiment, the increase of bioresolution was highest at the $H_2O$$_2$ Division dosage Ratio of 3:7.3:7.