• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.4
• /
• pp.63-76
• /
• 2022

This study was conducted to compare the perceptions of the park use status, importance, and satisfaction of users in the first implemented and completed Uijeongbu Jikdong Neighborhood Park among the private park special projects carried out as a countermeasure for long-term non-execution of urban parks. To this end, in the initiated project, apartment residents and non-residents were classified according to the promotion plan, and a questionnaire research on importance and satisfaction was conducted to analyze the park use status and IPA(importance-performance analysis). First, as a result of the analysis of the current situation in terms of locational characteristics that occur during the promotion of special projects for private parks, unlike the mountainous areas, the targeted site was close to flat land, indicating that users' satisfaction with the landscape was high. Second, the access of the apartment residents in the initiated project site was easy. Thus, the use rate of residents was relatively higher than that of the non-residents. Third, differences in perception by item were identified through the analysis of IPA and the establishment of strategies. In quadrant I, among the facilities and services, installing restrooms was the priority for residents, and parking facilities and rest facilities were the priority than installing restrooms for non-residents. In quadrant II, overall scores for residents and non-residents were similar, but the distance to the park was in quadrant III due to the low level of satisfaction among non-residents. In this study, the difference in perception between residents and non-residents may cause problems in access and facilities in managing the park in the future. Therefore, it would be necessary to find a way to improve it by establishing a management strategy that takes into account the difference in the perception of residents after construction. In addition, through the results of this study, it was judged that the purpose of park development, the selection of types of parks, and the selection of plans and management indicators for each kind would be significant in the promotion of initiated projects in the planning of park development.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.273-288
• /
• 2023

Although many studies have been conducted on techniques and effects that can be applied to forest meditation in domestic forest healing meditation research, there has been little research on the space where forest meditation takes place. Nevertheless, a meditation space is not just a place concept but a forest environment element responsible for the healing function of a forest, i.e., a place containing healing factors, and can be an essential clue to the healing mechanism. Therefore, to determine whether a healing forest meditation space is suitable for meditation, this study selected the attribute items of the meditation space using the Delphi expert survey and then surveyed the user satisfaction of the healing forest meditation space using the IPA (Importance Performance Analysis) technique. The survey was conducted from August to November 2022, targeting 315 adults who used the forest meditation space at the National Center for Forest Therapy, the Saneum Healing Forest, and the Jathyanggi Pureunsup Arboretum in Gyeonggi Province. The result of the IPA analysis showed the average satisfaction with the forest meditation space was relatively high at 4.33 points on a 5-point Likert scale (4.33 points for the National Center for Forest Therapy, 4.34 points for the Saneum Healing Forest, and 4.37 points for the Jathyanggi Pureunsup Arboretum), indicating that the three healing forest meditation spaces were suitable for forest meditation. Satisfaction with the "Sounds of nature" was high in all three forests. On the other hand, all three forests showed a relatively low satisfaction with "Quietness," indicating it to be a priority problem to be addressed. Also, an open-ended questionnaire survey showed that the mediation space's natural elements, such as natural sounds, scenery, air, forest spaces, and scents, had a higher positive impact on meditation satisfaction than artificial elements, such as facilities. Therefore, it is essential to secure sound resources such as the sound of water and birds around the meditation space, and it is also necessary to consider ways to create a meditation forest in an independent area to avoid encounters with visitors and allow only participants in the forest healing meditation program to enter to increase satisfaction with forest meditation.

• Korea Science and Art Forum
• /
• v.28
• /
• pp.23-32
• /
• 2017

The purpose of this study is to contribute to the activation of sports for the disabled people in Korea through the localization of the road racing handcycles. Recently, there are no handcycles produced in Korea, and all the players are using products made in foreign countries. In the case of foreign products, it is made to fit the body shape of foreign athletes. Therefore, when domestic players are using them, they put additional parts to foreign products in order to fit their body shape. This not only adds to the cost burden, but also causes a decrease in the performance of the athletes. In order to overcome these problems, we developed the road racing handcycle in consideration of the body shape of the Koreans and conducted a comparative usability evaluation with the foreign products to evaluate the performance of the developed prototype. Therefore, we analyzed the quantitative and qualitative evaluation results of the prototype produced in the previous study, and developed the Korean road racing handcycle that can improve the competitiveness while considering the shape of domestic players. Based on the problems derived from the first prototype, this study additionally constructed a crank, an air intake part and a discharge part, and a rear anti-shake prevention device. In order to evaluate the usability, we conducted a comparative usability assessment with the foreign products used by the current standing handcycle athletes. The results were measured in the area of effectiveness, efficiency, and satisfaction, and the prototype developed through the research on efficiency and satisfaction excluding effectiveness was evaluated to be higher than those of foreign products. This study will contribute to the improvement of international competitiveness due to import substitution effects of foreign products and exports by lowering the handcycle cost of importing foreign handcycle.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.426-438
• /
• 2023

Lithium-sulfur batteries, recently attracting attention as next-generation batteries, have high energy density but are limited in application due to sulfur's insulating properties, shuttle phenomenon, and volume expansion. This study used an economical and simple vacuum filtration method to prepare a freestanding electrode without a binder and collector. Carbon nanotubes (CNTs) are used to improve the electrical conductivity of sulfur, where CNT also acts as both collector and conductor. In addition, metal oxides (MO_x, M=Ni, Mg), which are easy to adsorb lithium polysulfide, are added to the CNT/S electrode to suppress the shuttle reaction in lithium-sulfur batteries, which is a result of suppressing the loss of active sulfur material due to the excellent adsorption of lithium polysulfide by metal oxides. The MO_x@CNT/S electrode exhibited higher capacity characteristics and cycle stability than the CNT/S electrode without metal oxides. Among the MO_x@CNT/S electrodes, the NiO@CNT/S electrode displayed a high discharge capacity of 780 mAh g^-1 at 1 C and an extreme capacity decrease to 134 mAh g^-1 after 200 cycles. Although the MgO@CNT/S electrode exhibited a low discharge rate of 544 mAh g^-1 in the initial cycle, it showed good cycle stability with 90% of capacity retention up to 200 cycles. Further, to achieve high capacity and cycle stability, the Ni_0.7Mg_0.3O@CNT/S electrode, mixed with Ni:Mg in the ratio of 0.7:0.3, manifested an initial discharge rate of 755 mAh g^-1 (1 C) and a capacity retention rate of more than 90% after 200 cycles. Therefore, applying binary metal oxides to CNT/S provides a freestanding electrode for developing economical and high-performance Li-S batteries, effectively improving lithium polysulfide's high capacity characteristics and dissolution.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.303-310
• /
• 2023

The current study was conducted to compare the effect of crossbred on the body weight and laying performance of Korean native chicken from hatch to week 40. A total of 873 one-day-old chicks were divided into twelve crossbreds (i.e., CFCK, CFYC, CFYD, CKCF, CKYC, CKYD, YCYD, YCCF, YCCK, YDCF, YDCK, and YDYC) and commercial layer (Hy-Line Brown) were obtained as a counterpart in the study. All the birds are raised in battery cages (76 × 61 × 46 cm³) and then raised until 14 weeks and subsequently moved to layer battery cages (60 × 25 × 45 cm³) and raised until 16 weeks. The body weight and viability were measured biweekly from hatching to week 16. The week of 16, body weight range was about 1,010.24 to 1,411.77 g. The body weight of specific crossbreeds (i.e., CKCF, YCYD, and YDYC) was found to be comparable to that of Hy-Line Brown). The viability hatch to week 14 range was about 55 to 100% and however week 14 to 16 range was 80 to 100%. The crossbred (i.e., CKCF) recorded superior (P<0.05) viability throughout the whole experiment period, even compared with Hy-Line Brown (100% vs 96%). Our results are indicating that crossbreds Korean native chicken including CKCF, and YDYC has the potential to enhance key features of laying hens during the growing phase like optimal body weight and higher viability.

• Journal of Nutrition and Health
• /
• v.56 no.5
• /
• pp.554-572
• /
• 2023

Purpose: The purpose of the study was to analyze the priorities for educational content regarding precautions to be taken to prevent safety accidents for employees in school foodservice using the Borich priority formula and the Locus for Focus model. Methods: A survey was conducted in February 2019 on 194 employees in elementary school and 122 employees in middle- and high school foodservice in the Jeonbuk area. Demographic characteristics, status of safety accidents, safety education, and their importance and performance levels were assessed using a self-administered questionnaire. The priorities for the educational content on precautions to prevent safety accidents were based on a 3-step analysis method, including the paired sample t-test, Borich priority formula, and the Locus for Focus Model. Results: The average perceived importance of the precautions to be taken against safety accidents of employees in elementary-, middle-, and high schools was higher compared to the average performance of the employees (p < 0.001). The top priority for elementary school employees was caution against falls during the cleaning of the gas hood and the trench in the kitchen. In addition, 'awareness of chemical signs' was added as one of the top priorities of middle- and high school employees. The second highest priority items were 'do stretching', 'safely adjusting workbench height', 'keeping the right attitude', 'using assistive devices when moving heavy things', and 'checking the material safety data sheet', which were the same for all elementary, middle- and high school employees. Conclusion: Thus, to improve the educational preparedness of employees in the area of safety precautions, eight safety/accident prevention items should be included in the safety education program.

• Journal of the Korean Society of Radiology
• /
• v.81 no.1
• /
• pp.147-156
• /
• 2020

Purpose The objective of this study was to evaluate the diagnostic value and threshold levels of cytokeratin fragment 21-1 (CYFRA 21-1) in fine-needle aspiration (FNA) washouts for detection of lymph node (LN) recurrence in postoperative breast cancer patients. Materials and Methods FNA cytological assessments and CYFRA 21-1 measurement in FNA washouts were performed for 64 axillary LNs suspicious for recurrence in 64 post-operative breast cancer patients. Final diagnosis was made on the basis of FNA cytology and follow-up data over at least 2 years. The concentration of CYFRA 21-1 was compared between recurrent LNs and benign LNs. Diagnostic performance and cut-off value were evaluated using a receiver operating characteristic curve. Results Regardless of the non-diagnostic results, the median concentration of CYFRA 21-1 in recurrent LNs was significantly higher than that in benign LNs (p < 0.001). The optimal diagnostic cut-off value was 1.6 ng/mL. The sensitivity, specificity, positive predictive value, negative predictive value, and accuracy of CYFRA 21-1 for LN recurrence were 90.9%, 100%, 100%, 98.1%, and 98.4%, respectively. Conclusion Measurement of CYFRA 21-1 concentration from ultrasound-guided FNA biopsy aspirates showed excellent diagnostic performance with a cut-off value of 1.6 ng/mL. These results indicate that measurement of CYFRA 21-1 concentration in FNA washouts is useful for the diagnosis of axillary LN recurrence in post-operative breast cancer patients.

• Journal of the Korean Society of Radiology
• /
• v.83 no.2
• /
• pp.331-343
• /
• 2022

Purpose To systematically compare the performance of liver imaging reporting and data system treatment response (LR-TR) with the modified Response Evaluation Criteria in Solid Tumors (mRECIST) for diagnosing viable hepatocellular carcinoma (HCC) treated with locoregional therapy (LRT). Materials and Methods Original studies of intra-individual comparisons between the diagnostic performance of LR-TR and mRECIST using dynamic contrast-enhanced CT or MRI were searched in MEDLINE and EMBASE, up to August 25, 2021. The reference standard for tumor viability was surgical pathology. The meta-analytic pooled sensitivity and specificity of the viable category using each criterion were calculated using a bivariate random-effects model and compared using bivariate meta-regression. Results For five eligible studies (430 patients with 631 treated observations), the pooled per-lesion sensitivities and specificities were 58% (95% confidence interval [CI], 45%-70%) and 93% (95% CI, 88%-96%) for the LR-TR viable category and 56% (95% CI, 42%-69%) and 86% (95% CI, 72%-94%) for the mRECIST viable category, respectively. The LR-TR viable category provided significantly higher pooled specificity (p < 0.01) than the mRECIST but comparable pooled sensitivity (p = 0.53). Conclusion The LR-TR algorithm demonstrated better specificity than mRECIST, without a significant difference in sensitivity for the diagnosis of pathologically viable HCC after LRT.

• Journal of Korea Water Resources Association
• /
• v.57 no.5
• /
• pp.333-346
• /
• 2024

High-resolution medium-range streamflow prediction is crucial for sustainable water quality and aquatic ecosystem management. For reliable medium-range streamflow predictions, it is necessary to understand the characteristics of forcings and to effectively utilize weather forecast data with low spatio-temporal resolutions. In this study, we presented a comparative analysis of medium-range streamflow predictions using the distributed hydrological model, WRF-Hydro, and the numerical weather forecast Global Data Assimilation and Prediction System (GDAPS) in the Geumho River basin, Korea. Multiple forcings, ground observations (AWS&ASOS), numerical weather forecast (GDAPS), and Global Land Data Assimilation System (GLDAS), were ingested to investigate the performance of streamflow predictions with highresolution WRF-Hydro configuration. In terms of the mean areal accumulated rainfall, GDAPS was overestimated by 36% to 234%, and GLDAS reanalysis data were overestimated by 80% to 153% compared to AWS&ASOS. The performance of streamflow predictions using AWS&ASOS resulted in KGE and NSE values of 0.6 or higher at the Kangchang station. Meanwhile, GDAPS-based streamflow predictions showed high variability, with KGE values ranging from 0.871 to -0.131 depending on the rainfall events. Although the peak flow error of GDAPS was larger or similar to that of GLDAS, the peak flow timing error of GDAPS was smaller than that of GLDAS. The average timing errors of AWS&ASOS, GDAPS, and GLDAS were 3.7 hours, 8.4 hours, and 70.1 hours, respectively. Medium-range streamflow predictions using GDAPS and high-resolution WRF-Hydro may provide useful information for water resources management especially in terms of occurrence and timing of peak flow albeit high uncertainty in flood magnitude.