• Journal of agricultural medicine and community health
• /
• v.35 no.4
• /
• pp.339-349
• /
• 2010

Objective: We surveyed awareness levels of brucellosis, Q fever and enterohemorrhagic Escherichia coli (EHEC) among dairy farmers in Gyeonggi Province to suggest directions for public education and public relations. Methods: We designed questionnaires to evaluate awareness of 3 major zooneses. We conducted a questionnaire survey to assess knowledge of the general characteristics of them, information sources for the awareness of zooneses, and the mode of transmission. Subjects were 716 workers from 482 dairy farms in Gyeonggi province. Results: The awareness levels for brucellosis, Q fever, and EHEC were 90.2%, 2.5% and 56.6%, respectively. Awareness of brucellosis and EHEC were tended to increase with higher number of school years. Television was the most common route of information for these zoonoses. Most common responses for questions concerning the method of transmission for each zoonoses, 'Contact with parturient fluid or placenta of animal' was 63.2% for brucellosis, 'Ingestion of raw meat or residual product' was 66.7% and 64.2% for Q fever and EHEC, respectively. The most common reason why dairy farmers think that it is difficult to prevent zoonoses was the inconvenience of wearing protection. Conclusions: Education programs for zoonoses, especially Q fever, are needed for dairy farmers. In addition, publicity information activities about prevention of zoonoses are needed for high risk groups, such as the dairy farmers surveyed.

• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.13-23
• /
• 2007

In recent years, mammography system is changed rapidly from conventional screen-film system to digital system for application to screening and diagnosis. Digital mammography system provides several advantages over screen-film mammography system. According to the information provided by the manufacturer, digital mammography system offers radiation dose reduction in comparison with screen-film mammography system, because of digital detector, particularly direct digital detector has higher x-ray absorption efficiency than screen-film combination or imaging plate(IP). We measured average glandular doses(AGD) in screen-film mammography(SFM) system with slow screen-film combination, computed mammography(CM) system, indirect digital mammography(IDM) system and direct digital mammography(DDM) system using brest tissue-equivalent phantom(glandularity 30%, 50% and 70%). The results were shown as follows : AGD values for DDM system were highest than those for other systems. Although automatic exposure control(AEC) mode was selected, the curve of the AGD values against thickness or glandularity increased significantly for the SFM system with the uniform target/filter(Mo/Mo) combination. Therefore, the AGD values for the high energy examinations were highest in the SFM system, and those for the low energy examinations were highest in the DDM system. But the curve of the AGD values against thickness and glandularity increased gently for CM system with the automatic selection of the target/filter combination (from Mo/Mo to Mo/Rh or from Mo/Rh to Rh/Rh), and the AGD values were lowest. Consequently, the parameters in mammography for each exposure besides detection efficiency play an important role in oder to estimate a patient radiation dose.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.314-324
• /
• 1997

This study was conducted to investigate whether 1) photosynthetic pigments(chlorophylls and carotenoids) are formed in dodder plant(Cuscuta australis), 2) there are any characteristics in the pigment biosynthesis, compared to that of other normal plants, and 3) dodder responds to some herbicides having target site on chloroplast. 1. Chlorophyll content of dodder tendrill grown under a natural daylight was 9 times and 50 times lower than that of field bindweed stem and leaf, respectively. 2. The photosynthetic pigment contents varied in different tissues, being higher in a apical region than in a lower region of seedling or tendrill. Chlorophyll wasn't almost observed below the 4th internode from the upper. 3. Pigment contents were greatly dependent on light intensity so that there were 4 to 6 times difference among light conditions. When the shoot containning low pigment contents under natural light, was incubated in growth chamber with various light intensities, the pigment contents were increased by 3 times of initial contents at about 97${\mu}E$ $m^{-2}s^{-1}$PAR. While the change in pigment contents was not observed at above 450${\mu}E$ $m^{-2}s^{-1}$PAR 4. Exogenous supply of 5mM 5-aminolevulinic acid increased protochlorophyllide by 7 times and 1.4 times in the etiolated shoot from field bindweed rhizome and in dodder stem, respectively, showing that dodder relatively has a low response to 5-aminolevulinic acid. 5. Pigment loss was observed in the treatment of paraquat, norflurazon, oxyfluorfen and diuron, and protoporphyrin IX was accumulated by oxyfluorfen as in normal plants Based on above results, several chracteristics of pigment biosynthesis in dodder seem to be summerized as follows. Photosynthetic pigment biosynthesis in Cuscuta australis runs even in low level. The pigment contents is differentially distributed in different regions and their contents seem significantly to be controlled by light intensities. Especially, chloroplast rapidly tends to degenerate with the development of tissue. Some herbicides having target site on chloroplast induce damage to dodder stem but are unlikely to control it well in field, except paraquat, due to low chloroplast activity and parasitic mode of nutrition.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.203-210
• /
• 2011

Objectives: The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods: Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15), according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond) and application methods. The adhesive systems were applied on the dentin as follows: 1) The single coating, 2) The double coating, 3) Manual agitation, 4) Ultrasonic agitation. Following the adhesive application, light-cure composite resin was constructed. The restored teeth were stored in distilled water at room temperature for 24 hours, and prepared 15 specimens per groups. Then microtensile bond strength was measured and the failure mode was examined. Results: Manual agitation and ultrasonic agitation of adhesive significantly increased the microtensile bond strength than single coating and double coating did. Double coating of adhesive significantly increased the microtensile bond strength than single coating did and there was no significant difference between the manual agitation and ultrasonic agitation group. There was significant difference in microtensile bonding strength among all adhesives and Clearfil Tri-S Bond showed the highest bond strength. Conclusions: In one-step self-etching adhesives, there was significant difference according to application methods and type of adhesives. No matter of the material, the manual or ultrasonic agitation of the adhesive showed significantly higher microtensile bond strength.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.329-337
• /
• 1995

The effect of N-(4-chlorophenyl) maleimide(CPMI), plant growth regulators, and alkylating agents on gluathione(GSH) content and glutathione S-transferase(GST) activity was examined with 3-day-old etiolated sorghum(Sorghum bicolor [L.] Moench) seedlings. The GSH content and GST activity of untreated seedlings were higher in shoots than that in roots. Response of GST activity in coleoptile was significantly greater than in other tissues of sorghum seedling. In CPMI-treated seedlings, GSH content was not significantly different from that in untreated seedlings. CPM treatment resulted in 2.3-fold increase in GST activity measured with metolachlor as substrate in the coleoptile region. In contrast, change in GST activity measured with metolachlor as substrate in the coleoptile region. In contrast, change in GST activity measured with 1-chloro-2, 4-dinitrobenzene did not occur. The increase of GST activity was caused by induction of a GST isozyme, which is substrate-specific to metolachlor. Subsequently, two hypotheses related to metolachlor detoxification were evaluated on the basis of regulation of plant growth regulators and substrate induction of GST activity. In coleoptile, GST activity measured with metolachior was increased to 2.1-and 3.4-fold by both 2, 4-dichlorophenoxyacetic acid(2,4-D) and metolachlor treated at the germination stage of sorghum, respectively. Treatments of 2.4-D and metolachlor also induced isozymes exhibiting the activity toward metolachlor. One of the isozymes was co-eluted with that induced by CPMI. These results indicated that increase in GST activity by CPMI may be partially related to auxin regulation and substrate induction.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.165-171
• /
• 2004

Weight loss and nutrients dynamics during decomposition of oak roots (diameter classes: R₁〈0.2㎝, 0.5㎝〈R₂〈1㎝, 1㎝〈R₃〈2㎝, 2㎝.〈R₄〈4㎝) (Quercus acutissima) were studied for 33-months in Kongiu, Korea. After 33-months, decomposition rate of R₁, R₂, R₃ and R₄ was 49.6%, 47.5%, 66.4% and 66.1%, respectively. The decomposition constant(k) for R₁, R₂, R₃, and R₄ was 0.249/yr, 0.234/yr, 0.397/yr and 0.393/yr, respectively. Larger diameter class of the root lost more weight than smaller diameter class. N concentration in decomposing oak roots increased in all diameter classes. After 33-months, remaining N in R₁, R₂, R₃ and R₄ was 66.5%, 80.7%, 84.4% and 44.4%, respectively. K concentration in decomposing oak roots decreased in early part of decomposition and then increased in later stage of decomposition. After 33-months, remaining P in R₁, R₂, R₃ and R₄ was 64.7%, 62.4%, 93.1% and 30.7%, respectively. K concentration in decomposing oak roots decreased rapidly in early stage of decomposition. Remaining K in R₁, R₂, R₃ and R₄ was 11.6%, 10.6%, 5.9% and 7.7%, respectively. Ca concentration in decomposing oak roots showed different among diameter classes. After 33-months, remaining Ca in R₁, R₂, R₃ and R₄ was 66.2%, 51.0%, 39.1% and 48.3%, respectively. Initial concentration of Mg in oak root was higher in smaller diameter class. After 33-months, remaining Mg in R₁, R₂, R₃ and R₄ was 15.3%, 29.9%, 24.5% and 69.4%, respectively.

• Journal of the Korean earth science society
• /
• v.40 no.6
• /
• pp.549-560
• /
• 2019

The effects of the coal-fired power plant emissions, as the biggest point source of air pollutants, on spatiotemporal surface air pollution over the remote area are investigated in this study, based on a set of date selection and statistical technique to consider meteorological and geographical effects in the emission-concentration (source-receptor) relationship. We here proposed the sophisticated technique of data processing to separate and quantify the effects. The data technique comprises a set of data selection and statistical analysis procedure that include data selection criteria depending on meteorological conditions and statistical methods such as Kolmogorov-Zurbenko filter (K-Z filter) and empirical orthogonal function (EOF) analysis. The data selection procedure is important for filtering measurement data to consider the meteorological and geographical effects on the emission-concentration relationship. Together with meteorological data from the new high resolution ECMWF reanalysis 5 (ERA5) and the Korea Meteorological Administration automated surface observing system, air pollutant emission data from the telemonitoring system (TMS) of Dangjin and Taean power plants as well as spatio-temporal air pollutant concentrations from the air quality monitoring system are used for 4 years period of 2014-2017. Since all the data used in this study have the temporal resolution of 1 hour, the first EOF mode of spatio-temporal changes in air pollutant concentrations over the Seoul metropolitan area (SMA) due to power plant emission have been analyzed to explain over 97% of total variability under favorable meteorological conditions. It is concluded that SO₂, NO₂, and PM₁₀ concentrations over the SMA would be decreased by 0.468, 1.050 ppb, and 2.045 ㎍ m^-3 respectively if SO₂, NO₂, and TSP emissions from Dangjin power plant were reduced by 10%. In the same way, the 10% emission reduction in Taean power plant emissions would cause SO₂, NO₂, and PM₁₀ decreased by 0.284, 0.842 ppb, and 1.230 ㎍ m^-3 over the SMA respectively. Emissions from Dangjin power plant affect air pollution over the SMA in higher amount, but with lower R value, than those of Taean under the same meteorological condition.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Clinical and Experimental Pediatrics
• /
• v.48 no.8
• /
• pp.846-856
• /
• 2005

Purpose : To measure the peak myocardial tissue velocities and patterns of longitudinal motion of atrioventricular(AV) annuli and assess body weight and heart rates-related changes in normal children. Methods : Using pulsed wave Tissue Doppler Imaging(TDI), we measured peak systolic, early and late diastolic myocardial velocities in 72 normal children at six different sites in apical-4 chamber (A4C) view and at four different sites in apical-2 chamber(A2C) view and compared those values with each other, also observing effects with body weights and heart rates. Longitudinal motions of the AV annuli were measured at three different sites in A4C. Results : There were no significant differences of the TDI parameters between gender, ECHO-machines and among the three Doctors performing TDI. Peak myocardial velocities were significantly higher at the base of the heart than in the mid-ventricular region and in the right lateral ventricular wall than in the left lateral ventricular wall or IVS. The TDI parameters showed no significant correlation with fractional shortening(%). Peak systolic and early diastolic myocardial velocities had no correlation with heart rates, but peak late diastolic velocities and A/E ratio correlated positively with heart rates. Correlations between the TDI parameters and body weight were inconsistent. Absolute longitudinal displacement and % displacement were not differ between gender and not correlated with the TDI parameters. Conclusion : We measured the peak myocardial velocities with TDI and the longitudinal motion of the AV annuli using M-mode echocardiography in normal children. With more large scale evaluation, we may establish reference values in normal children and broaden clinical applicabilities in congenital and acquired heart diseases.