• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.19-34
• /
• 2021

The aim of this study is verifying the effects of chatbot's error types and structures of error message on attitude, behavior intention towards the chatbot and perceived usability of the chatbot. The error types of chatbot are divided into 'experience' error and 'agency' error, which set different expectancy level, according to mind perception theory. The structures of error message were either unstructured condition composed of error specification only or structured condition composed of apology, explanation and willingness of improvement. It was found that score of perceived usability was higher in experience error condition than agency error condition. Also, all three scores of dependent variables were higher in structured error message condition than unstructured error message condition. Furthermore, expectation gap of experience didn't predict the dependent variables but expectation gap of agency predicted all three dependent variables. Finally, the tendency of interaction effect between the error type and the structure of the error message on expectation gap of agency was observed. This study confirmed the mitigating effect of structured error messages and the possibility that these effects may vary by the type of error. The result is expected to be applicable to design of error coping strategies that enhance user experience.

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.258-270
• /
• 2021

This study aimed to investigate the effects of the virtual reality simulation for malocclusion examination for dental education. A 4-step modeling procedure was applied to develop a tooth model with a realistic level in order to be held and observed in detail. Eighty-six participants used HMDs to examine the developed virtual dental simulation to identify their perception according to expertise levels. The independent variable, expertise group, included three levels: 29 juniors, 29 seniors, and 28 dentists, respectively. The dependent variables, that were task-load and usability, were measured through two cases. Results showed that the junior group perceived a higher level of mental demands and embarrassment than the dentist group. It indicated that the perceived task load varies according to the expertise levels in the simulation task. However, the senior group perceived a higher level of ease of use than the dentist group. This study presented the implications for the development of virtual reality simulation in detail.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.235-244
• /
• 2022

Objective: The aim of this study was to investigate of the foot plantar pressure and usability after gait training using the ExoAtlet wearable exoskeleton robot in an incomplete spinal cord injury (SCI) patient. Design: A case study Methods: Six participants with an asymmetry in motor and sensory function completed the gait training using ExoAtlet wearable exoskeleton robot for 15 sessions, five per weeks, 3weeks. They were divided into two groups (low and high strength group) and group differences were evaluated about session at stating of gait, gait distance at final session and foot plantar pressures and useability after training. Results: Low strength group was faster than high strength group on adaptation of robot gait. And high strength group increased faster than low strength group on the gait distance during training. In standing and gait, weaker leg was higher than stronger leg on mean foot plantar pressure in low strength group. And stronger leg was higher than weaker leg on foot plantar pressure in high strength group. The length of the anterior-posterior trajectory of the center of pressure during gait was similar in low strength group, but different in high strength group. useability was positive about ExoAtlet wearable exoskeleton gait after training. Conclusions: ExoAtlet wearable exoskeleton robot gait training was positive about improving gait in all participants regardless of differences in severity of symptoms and gait abnormalities.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.5
• /
• pp.38-45
• /
• 2013

Buffer green space in the residential area is a mechanism for improving the residential environment and also significant for residential life satisfaction and its various social roles. Accordingly, this study aimed to discover the effect of the buffer green space, which was established to minimize environmental influences of the residential environment, on residential life satisfaction. For this purpose, a survey was conducted on residents in Myeongji Residential Area where the buffer green space was installed, to examine the factors of the buffer green space and to analyze its causal relation with residential life satisfaction. The SPSS(statistical package for social science) 21 program was used for analysis and factorial analysis, correlation analysis and multiple regression analysis were executed. As a result, the roles of the buffer green space in Myeong-ji Residential Area included residential comfort, disaster protection, green space usability and environmental ecological property. In the overall accrued factorial contribution rate, residential comfort was very high with 40.54% out of total 62.48%. In addition, the residential comfort and green area usability had a higher correlation with residential life satisfaction. However, the significant level of disaster protection and environmental ecological property were 0.725 and 0.898, respectively, which were not significant as a preference factor in multiple regression analysis. Accordingly, the buffer green space for improving residential comfort and green space usability was confirmed to enhance residential life satisfaction.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.483-496
• /
• 2012

The purpose of this study is to examine difference of information processing style on lesson comprehension scores and usability ratings in e-Learning containing visual information structure. To address this goal, 68 university students were participated in this research. They were asked information processing style test, lesson comprehension test, and usability ratings after completed e-Learning lesson. According to the result, there was not significant difference between visual and verbal information process style on lesson comprehension as learn outcomes. However, students who are visual information processing style were significantly higher ratings than students who are verbal information processing style on 4 of 8 usability scales; awareness of lesson structure, awareness of lesson length, ease of navigation, and ease of lesson learning. These result indicate that there will be needed the design of aptitude treatment interaction for e-Book according to information processing style.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.595-609
• /
• 2016

Objective: The purpose of this study was to develop and validate the guidelines for Medic Work Table (MWT) based on the anthropometric data of medical technologists. Background: Users' anthropometric data such as sitting height, sitting elbow height, knee height, and so on are significant factors for designing comfortable and useful furniture. Thus, many guidelines for different types of desks and chairs based on the users' anthropometric data have been suggested to many researchers. However, few researches have been conducted to provide design guidelines for MWT for blood collecting task. Medical technologists often use their upper extremities to perform blood collecting task with high repetitions. These repeated motions could be a critical factor in the prevalence rate of Work-related Musculoskeletal Disorders (WMSDs). Therefore, a study on ergonomic design of MWT would be essential in preventing the WMSDs and improving the quality of the working environment of medical technologists. Method: This study suggested design guidelines for ergonomic MWT by focusing on the heights of the upper side and underside, depths of the inside and outside, and width of MWT through anthropometric studies and literature reviews. Afterwards, a new MWT was made using the suggested design guidelines for this study. Five healthy medical technologists participated to evaluate the original MWT and new MWT. All participants took part in the range of motion (ROM) test, electromyography (EMG) muscle activity test, and usability test to validate the suggested guidelines in this study. EMG signals of related muscles (Flexor Carpi Ulnaris, Extensor Carpi Ulnaris, Deltoid Anterior, and Biceps Branchii) were recorded through the surface electromyography system from both the original MWT and the new MWT. The ROM test of the shoulder and elbow flexion was also assessed using motion sensors. Results: The newly designed MWT showed decreased ROMs of the shoulder and elbow up to 22% and 18% compared to the original MWT. The muscle activities in the new MWT also showed a decrease of 13% in Anterior Deltoid, 6% in Biceps Brachii, 5% in Flexor Carpi Ulnaris, and 8% in Extensor Carpi Ulnaris muscle groups, compared to the original MWT. In the usability test, the satisfaction score of the new MWT was also 56.1% higher than that of the original MWT. Conclusion: This study suggested guidelines for designing MWT and validating the guidelines through qualitative and quantitative analyses. The results of motion analysis, muscle activity, and usability tests demonstrated that the newly designed MWT may lead to less physical stress, less awkward posture, and better physical user interface. Application: The recommended guidelines of the MWT would be helpful information for designing an ergonomic MWT that reduces physical loads and improves the performance of many medical technologists.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.503-517
• /
• 2016

Objective: The aim of this study was to evaluate the effectiveness of 3 dimensional contoured pillow through analyzing contact pressure and to suggest its design guidelines through analyzing the posture of head and neck area. Background: The quality of sleep is a very important factor closely related with human's health. To improve the quality of sleep, the verification of design factors affecting the posture of the head and neck is needed, and a pillow design that can induce proper posture is required. Method: This study measured the contact pressures of the two reference groups (bead and cotton pillows) as a method to evaluate the design effectiveness of the contoured pillow. This study proposed 3-dimensional design guidelines by drawing anthropometry (head length) affecting cervical curvature angle (CCA) through the measurement of the participants' cervical curvature angles. Results: In the design effectiveness evaluation, the contact pressure of cervical region was higher than that of a reference group (cotton pillow), and contract area increased, and contract pressure decreased in the shape distributing the occipital region's body pressure. This study proposed pillow's cervical supporting height by percentile of a head length [head length (%tile) (cervical supporting height) affecting the posture of the head and neck: 14.6cm (5%tile) (6.2cm), 15.5cm (25%tile) (6.7cm), 16.4cm (50%tile) (7.1cm), and 19.3cm (75%tile) (8.9cm)]. Conclusion: This study confirmed the contoured pillow's design effectiveness maintaining cervical angle comfortable to sleep with the shape supporting the cervical vertebrae and by reducing the contact load of the occipital region. Also, this study proposed pillow design guidelines based on the 3-dimensional contoured pillow design effectiveness, through which the study laid the foundation for pillow design in a systematic method. Application: The results of this study are expected to be utilized as the basis data by which the optimum pillow type and pillow design according to main percentile can be standardized.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.2
• /
• pp.255-274
• /
• 2015

This study aims to define the user experience and to evaluate the usability toward electronic publication for education and research. As research methods, After total 20 people of 10 undergraduate students and 10 graduate students were randomly selected as the subjects, the research was conducted by using the in-depth interview and the e-book reader experimental method. As the results of analysis about subjective preferences in case of using academic resources, The subject relevance and understandability were responded as most important factors for selecting academic resources. And the most frequent purposes for using academic resources were to perform an assignment and to write an article. As the results of analysis about the user experience for using the print media and electronic media, the user experience of the print media is more positive than the electronic media and especially these results were caused by academic situation. Many subjects responded that the electronic media is more inconvenient in case of using academic resources. As a result of the e-book reader usability test, the hardware test score (3.47) is higher than the software test score (3.31).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.28 no.1
• /
• pp.49-56
• /
• 2024

Purpose: When performing nuclear medicine examinations, body wraps or plastic supports are used to support and immobilize the patient's upper extremities to prevent patient safety accidents. However, the existing plastic supports compromised patient and staff safety, including finger entrapment and falls. Moreover, the body wrap provided by manufacturers compromised image quality such as upper extremities cutoff during whole body bone scan. Therefore, a new design of body wrap was developed to improve the issue, and this study aims to evaluate the usability of this medical body wrap. Materials and Methods: To evaluate the usability of the newly designed medical body wrap, a quality assessment of whole body bone scan images and a user satisfaction survey were conducted. Adult patients (male:female=129:152, age: 60.3±12.4 years, BMI: 24.0±4.2) aged 16 years or older who underwent a whole body bone scan during two periods: June to July 2022 (before improvement, n=139) and June to July 2023 (after improvement, n=142) were randomly selected for image quality evaluation. Five radiotechnologists visually evaluated the posterior view of the whole body bone image, including the left and right elbow (2 points), arm (2 points), whether the hand is extended (2 points), whether the hand is included (2 points), and the number of visible fingers (10 points), with a total of 18 points, which were converted to 100 points and analyzed for difference before and after improvement using an independent sample t-test. The user satisfaction questionnaire was evaluated using a 5-point Likert scale among 16 radiotechnologists from three general hospitals who experienced the new body wrap. Results: The image quality assessment was 82.0±13.8 before the improvement and 89.3±10.1 after the improvement, an average of 7.3 points higher, with a statistically significant difference (t=5.02, p<0.01). The user satisfaction survey showed an overall satisfaction rating of 4.1±0.8 for ease of use, 3.8±0.7 for scan preparation time, 3.9±0.7 for patient safety, 3.8±1.2 for scan accuracy, and 4.2±0.7 for recommendation (87.5% questionnaire response rate). Conclusion: The developed body wrap showed higher image quality and user satisfaction compared to the old method. Considering these results, it is deemed that the new body wrap may be more useful than existing methods.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.47-53
• /
• 2012

Recently many developed countries have used satellite images for classifying cropland areas to reduce time and efforts put into field survey. Korea also has used satellite images for the same purpose since KOMPSAT-2 was successfully launched and operated in 2006, but still far way to go in order to achieve the required accuracy from the products. This study evaluated the accuracy of the calculated croplands by using the objected classification method with various satellite images including ASTER, Spot-5, Rapid eye, Quickbird-2, Geo eye-1. Also, their usability and effectiveness for the cropland survey were verified by comparing with field survey data. As results. Geo eye-1 and Rapid eye showed higher accuracy to calculate the paddy field areas while Geo eye-1 and Quickbird-2 showed higher accuracy to calculate the upland field areas.