• 한국식품저장유통학회지
• /
• 제10권1호
• /
• pp.75-79
• /
• 2003

검정콩을 이용한 기능성 간장을 제조하기 위한 연구의 일환으로 원료 콩의 증자조건에 따른 검정콩 전통간장의 숙성후, 질소화합물 및 유리아미노산의 함량을 조사하였다. 총질소 함량은 308.3∼925.0 mg%로 나타났으며, 상압이나 스팀에 비하여 가압으로 증자한 간장의 총질소 함량이 아주 낮았고, 스팀증자 시간이 길어짐에 따라 총질소 함량이 증가하였다 아미노태질소 함량은 133∼451.5 mg%로 나타났으며, 상압(451.5 mg%)이 가장 높았으며, 스팀(178.9∼224 mg%)이 가압으로 증자한 간장(133∼171.5 mg%)에 비하여 약간 높은 편이었다. 암모니아태 질소함량은 23.S∼142.0 mg%로 나타났으며, 상압과 스팀에 비하여 가압으로 증자한 검정콩 간장이 암모니아태 질소의 함량이 낮게 나타났다. 유리아미노산 함량은 133∼451.5 mg%로 나타났으며, 상압(451.5 mg%)이 가장 높았으며, 다음으로 스팀(178.9∼224 mg%)이 가압으로 증자한 간장(133∼171.5 mg%)에 비하여 약간 높은 편이었다. 색도의 명도(L값)은 45.13∼49.08의 범위로 시험구간에 큰 차이는 없었으나 대부분 상당히 낮은 값을 나타내었고, 적색도(a값)와 황색도(b값)은 각각 25.30∼34.43, 52.55∼74.13의 범위로 시험구간에 약간 차이가 있었다.

• 한국식품영양과학회지
• /
• 제43권5호
• /
• pp.698-704
• /
• 2014

본 연구에서는 돈육의 육류 함량 일부를 율피분말로 대체하여 0, 1, 3, 5%의 패티를 제조하여 항산화 활성과 이화학적 품질특성을 측정하고 관능평가를 실시하였다. 율피 패티의 총 페놀 함량과 DPPH 라디칼 소거능은 율피 함량에 따라 유의적으로 증가하였다. 패티의 pH와 수분 함량은 율피분말에 따른 유의적인 차이가 없었으며 가열손실율은 율피분말 첨가량에 따라 유의적으로 감소하였고, 직경감소율은 유의적이진 않았지만 첨가량에 따라 감소하는 경향을 보였다. 가열 전후 모두 패티의 L값은 유의적으로 감소했으며 a값은 유의적으로 증가했다. 그러나 b값의 경우 가열 전에는 율피분말 첨가량에 따라 증가하였으나 가열 후 패티의 b값은 첨가량과 반비례하여 감소하는 경향을 보였다. 조직감 측정 결과 율피분말 첨가량에 따라 경도, 씹힘성, 검성, 응집성이 유의적으로 증가하였다. 소비자 기호도 검사 결과 향미와 맛을 제외한 전반적인 기호도, 외관, 색도, 조직감에서 유의적인 차이를 나타냈는데, 1% 첨가군이 가장 높은 점수를 받았으며 3% 첨가군은 조직감을 제외한 항목에서 대조군보다 높은 점수를 받았다. 이러한 결과로 보아 돈육 패티 제조시 1~3%의 율피분말의 첨가는 패티의 항산화 활성뿐 아니라 품질특성을 향상시키고 기호도를 증가시키는 것으로 사료된다.

• 대한화학회지
• /
• 제32권1호
• /
• pp.9-14
• /
• 1988

$La_{1-x}Ca_xFeO_{3-y}$ 계의 perovskite 형의 화합물은 La_2O_3,\;CaCO_3$, 및 Fe(NO-3)_3{\cdot}9H_2O$의 정량적 혼합물은 1100$^{\circ}C$에서 24시간 동안 가열하여 제조하였다. 이 고용체의 결정구조는 모든 조성에서 사방정계였다. X-선 회절분석과 Mohr 염 분석을 통하여 y값이 증가하면 공위배열에 의한 상전이가 일어나며 격자체적은 x값이 증가함에 따라 감소한다는 것을 확인하였다. 비화학양론적 조성 y는 0.0에서 0.5사이의 값을 나타내었다. Mossbauer 분광분석을 298K에서 수행하여 x = 0.75 조성이 높은 닐온도를 갖는다는 것을 확인하였다. 시료의 전기전도도는 $-100{\sim}100^{\circ}C$ 온도범위에서 측정하였다. 활성화 에너지로부터 공위 배열에 기인한 열린 통로를 갖고 있는 시료들은 이온성 전기전도에 의한 기여가 어느 정도 존재하는 것으로 밝혀졌다.

• 한국식품조리과학회지
• /
• 제29권5호
• /
• pp.525-531
• /
• 2013

Nutritional components and quality characteristics of drained soybean boiling water(DBW), which is discarded in the mass production of fermented soy foods, were compared with raw soybean(Control) and Cheonggukjang(CGJ) to provide the basic data for its recycle. The contents of moisture, crude protein, crude lipid and crude ash of DBW were shown as 87%, 2.2%, 0.15% and 1.42%, respectively. Decreased total amino acid of 1,677.8 mg/100g in DBW was comparable with 29,051.1 mg/100g in control, however, there was no great difference in the proportion of essential amino acid to the total. While the total sugar contents were decreased in both DBW and CGJ with 8.39% and 7.17% each from the control of 11.50%, the reducing sugars were increased with higher amount of 6.44% in CGJ and 8.30% in DBW than 5.60% in control. pH of DBW was lower than both of the control and CGJ. Hunter's color values revealed the increase of redness(a value) and yellowness(b value) of DBW and CGJ suggesting that Maillard reaction products were produced by the heating and fermentation process. Polyphenol compounds were highly abundant in CGJ of 0.74 tannic acid equivalent(mg/g) followed by similar low amounts of 0.33 and 0.29 tannic acid equivalent(mg/g) in DBW and control, respectively. Antioxidative activity determined by Electron Donating Ability(%) using DPPH radical showed that CGJ, of which polyphenols were the highest, has the strongest electron donating ability with the lowest $EC_{50}$ value of 5.91 mg/mL. DBW was much lower but similar with the control. From the above results the drained soybean boiling water was shown to have many nutritional and functional components as much as soybean, therefore, it could be a potent reusable food material.

• 한국축산식품학회지
• /
• 제22권2호
• /
• pp.122-129
• /
• 2002

본 연구는 경상북도 축산기술연구소에서 보유하고 있는 재래닭 160수를 공시하여 인삼 부산물(잎 줄기), 산약 부산물(박피후 건조껍질), 한약(달인 후 찌꺼기) 부산물을 각각 5%씩 기본사료에 첨가급여하였다. 시험기간은 부화후 8주령에 시작하여 20주령에 종료하였으며, 재래종 계육의 육질에 미치는 영향을 알아보기 위해 이화학적 특성을 조사하였다.

• 한국농공학회지
• /
• 제26권1호
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• 한국식품조리과학회지
• /
• 제28권6호
• /
• pp.857-863
• /
• 2012

단호박의 전처리 조건에 따라 건조 후의 품질의 변화를 조사하기 위하여 전처리 조건으로 블랜칭, 증숙 및 전자레인지의 방법으로 각각 전처리를 달리하여 품질특성을 조사하였다. 시료의 크기는 $2.5{\times}2.5{\times}1$ cm로 하였으며 블랜칭의 처리 온도는 50, 70, 90 및 $100^{\circ}C$으로 하여 각각 2분 동안 처리하였고 증숙 처리시간은 0, 1, 2, 4 및 6분, 전자레인지는 0, 5, 10, 20 및 60초 동안 각각 가열하여 10분 동안 식힌 후 실험을 진행하였다. 품질특성을 조사한 결과, 블랜칭 처리의 경우 수분함량은 대조구가 66.72%이었으나 온도가 높아질수록 점차적으로 감소하여 $100^{\circ}C$에서는 59.06%로 감소하였다. 당도는 온도가 높아질수록 점차적으로 증가하였다. 중량 감소율은 처리온도가 높을수록 오히려 증가하는 경향을 나타내었다. 색의 경우 온도가 높을수록 L값은 낮아지는 반면 a값은 증가하였고 b값은 증감하는 경향을 보였다. 증숙 시간에 따른 품질특성에서 증숙 시간이 길어질수록 수분함량은 감소하였으나 당도는 증가하였다. 중량 감소율은 계속적으로 증가하였으나 그 변화의 폭은 미미하였다. 색의 변화에서도 증숙 시간이 길어질수록 L값은 낮아졌으며 a값 및 b값은 다소 증가하였다. 전자레인지 처리는 시간이 길어질수록 수분함량은 감소하였고 당도와 중량 감소율은 다소 증가하였으며 색은 블랜칭과 중숙의 경우와 같은 경향으로 나타났다. 경도의 결과는 블랜칭 처리가 가장 낮았으며 그 다음이 증숙, 전자레인지 순으로 나타났다. 당 침투 시간은 20시간으로 결정되었으며 당 종류별 관능평가에서는 설탕과 설탕:과당(1:1) 조성물이 높게 평가되었다. 따라서 건조 단호박은 전처리로 증숙을 2분 처리하는 것이 좋으며 당침지액은 설탕:과당(1:1)이나 설탕:과당:플락토 올리고당(5:3:2)이 적당할 것으로 보인다.

• 한국지역사회생활과학회지
• /
• 제24권4호
• /
• pp.485-495
• /
• 2013

As rural life has shifted with the long term changes in the internal and external conditions of rural communities, this study aims to investigate the living conditions and life satisfaction of rural women. 70 questionnaires in health, clothing, food, shelter, economic conditions and child-rearing fields were used for a survey of 393 rural women from five rural areas in the northern region of Gyeongsangbuk-Do. Statistical techniques of frequency analysis, descriptive statistics, ANOVA, t-test and regression analysis were employed through 'SPSS Statistics 21'. Participants were divided into 3 groups, with Group A with income less than 15 million won, Group B with income of at least 15 million won and less than 30 million won, and Group C with at least 30 million won. For the life satisfaction and health conditions, Group C showed higher scores than Group A. The food security status of rural women in the research area was worse than that in the Korea National Health and Nutrition Examination Survey, and food consumption by Group C was higher than that of Group A and Group B. For the satisfaction of kitchen, bathroom facilities and heating system, the income of 15 million won seemed to be the divisive value where richer groups were more satisfied. Job satisfaction seemed more related with the income amount rather than with the job itself. The parenting efficacy and child-rearing satisfaction were higher for Group C than for Group A. Determinants of life satisfaction turned out to be health conditions, heat susceptibility, fruit consumption, kitchen unit satisfaction, job satisfaction and parenting efficacy.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.65-71
• /
• 2009

본 연구에서는 상용모사기를 이용하여 100 MWth 매체순환연소(CLC) 복합발전 플랜트의 성능 및 경제성 평가를 수행하였다. 원료로는 천연가스와 합성가스를 고려하였으며 원료에 따른 성능 및 발전단가를 비교, 분석하였다. 천연가스와 합성가스를 사용하는 경우 모두 발전 효율은 53~54% 수준으로 평가되었으며 이는 기존 연구와 부합하는 결과임을 확인하였다. 경제성 분석을 위해서 Chemical Engineering Plant Cost Index와 Guthrie 방법을 사용하여 장치비를 산정하였으며 합성가스의 저위발열량이 천연가스보다 낮기 때문에 장치비가 다소 높은 것을 확인하였다. 연료의 종류에 따른 발전단가 계산 결과 합성가스의 가격이 5.3 $/GJ 정도 되는 경우에 천연가스를 이용하는 경우의 발전단가인 5.8 ¢/kWh보다 낮아지는 것으로 나타났다.

• Journal of Animal Science and Technology
• /
• 제62권1호
• /
• pp.103-110
• /
• 2020

Quality characteristics of chicken emulsion sausage manufactured with various levels of NaCl and 9 times heated bamboo salt (0.3%, 0.6%, 0.9%, and 1.2% respectively) were examined. The pH value of chicken emulsion sausage was increase tendency with increasing amount of bamboo salt, on the contrary in case of NaCl sample were decrease tendency with increasing amount of NaCl. Both before and after heating, redness of chicken emulsion sausage with bamboo salt treatments were upward trend with increasing amount of bamboo salt. water holding capacity (WHC) of 1.2% NaCl sample was significantly higher than 0.3%-0.9% (p < 0.05), but 0.9%, 1.2% bamboo salt samples were significantly higher than 0.3, 0.6 % (p < 0.05). Water loss of 1.2% NaCl and 0.9% bamboo salt samples were significantly lower than other treatment (p < 0.05). Protein solubility values significantly increased amount of bamboo salt and NaCl (p < 0.05), and samples of 0.9% NaCl and 0.6% bamboo salt values show similar values. Cooking yield of samples were increased tendency with increasing amount of NaCl and bamboo salt. Also viscosity values of sample containing 1.2% bamboo salt sample showed higher viscosity than other treatments. These results show that containing 1.2% NaCl chicken emulsion sausage and 0.9% bamboo salt chicken emulsion sausage were similar physicochemical properties. Therefore, bamboo salt is suitable for manufacturing chicken emulsion sausage.