• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.763-771
• /
• 2013

This study was carried out to investigate the effects of various temperatures of electro-magnetic resonance and air blast freezing methods on the physicochemical quality of meat. Beef (loin and round), pork (belly and ham) and chicken (breast and leg) were purchased at a commercial market, and the meat was frozen using three methods: air blast freezing ($-20^{\circ}C$ and $-45^{\circ}C$) and electro-magnetic resonance quick freezing. Changes in the physicochemical properties of meat were analyzed by drip loss, cooking loss, water holding capacity (WHC) and proximate compositions. In comparison, regardless of the animal species and cuts of meat, electro-magnetic resonance quick freezing (2 h) resulted in a completely frozen product in a much shorter time than $-20^{\circ}C$ and $-45^{\circ}C$ air blast freezing (24 h and 8 h, respectively). Drip loss of loin which had underwent electro-magnetic resonance quick freezing were significantly (p<0.05) lower than those of the other two treatments, but cooking loss and water holding capacity were the highest at 43.7% and 60.7%, respectively (p<0.05). Characteristics such as crude protein, crude fat and moisture compositions showed significant differences, depending on the cuts and freezing methods (p<0.05). The fat composition of electro-magnetic resonance quick frozen loin and round were significantly low (p<0.05). However, moisture content was the highest compared to other freezing methods, as 67.1% and 71.9%, respectively (p<0.05). Electro-magnetic resonance quick freezing was an appropriate way to reduce the deterioration of meat quality due to freezing, and the drip loss was least for the part with low moisture, low protein, and high fat.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.3
• /
• pp.89-103
• /
• 2003

The purpose of this study was to investigate to relation of necessity and practice of contents of clothing and textiles education(classify them into four units, choice and dressing of clothes, textile and management of clothes, design and sewing of clothes, knitting and embroidery). Method of posing a questionnaire is adopted to obtain stochastic data required for pertinent analysis. This is the investigation of which 400 (high school students 204, university students 196) girl students located in Choongnam and Junrabookdo province. In this statistical analysis, SPSS 10.0 for Windows Program was utilized to calculate percentage, mean and standard deviation. Also, these materials were verified by t-test, One-way Anova, Pearson's correlation coefficient. The results of this research were as follows. First, girl students' necessity mean point were higher than practice mean point about the contents of clothing and textiles education. And necessity had a positive relationship with practices of contents of clothing and textiles education. Second, there was a significant difference in necessity and practice of contents of clothing and textiles education according to demographic variables. These results should be provide fundamental information for improving students' critical practice in their real life. Since this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future. this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.490-499
• /
• 2008

Statement of problem: Bioactive materials must have the ability to spontaneously form a bone like apatite layer on their surface and induce direct biochemical bonding to bone. A simple chemical treatment via alkali and heat has been revealed to induce bioactivity in titanium. Purpose: The purpose of this study was to evaluate the surface characteristics and stability of alkali and heat treated implants. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface implants, groups 2 and 3 were treated with alkali solutions and heat treated in the atmosphere and vacuum conditions respectively. The surface characteristics were observed with FESEM, XPS, TF-XRD and AFM. Stability was evaluated with the resonance frequency analysis, periotest and removal torque values. One-way ANOVA and Duncan test were used for statistical analysis. Results: 1. Groups treated with alkali and heat showed similar characteristics. Groups 2 and 3 showed high compositions of Na ions on the surface with sub-micron sized pores compared to group 1. Group 2 showed mixed compositions of anatase and rutile with superior contents of rutile. 2. Resonance frequency analysis : The ISQ of group 2 showed significantly higher values than that of groups 1 and 3 at 12 weeks. The ISQ of groups 1 and 2 showed significant increase after 4 weeks, and the ISQ of group 3 increased significantly after 2 and 4 weeks respectively (P < .05). 3. Periotest: The PTV of groups 1 and 2 showed significant decrease after 4 weeks, and the PTV of group 3 showed significant decrease after 2 and 4 weeks respectively (P < .05). 4. Removal torque analysis: The removal torque value of group 2 was significantly higher than those of groups 1 and 3 at 2, 4 and 8 weeks. The removal torque values of groups 1 and 3 showed increase at 4 and 12 weeks, but the removal torque value of group 2 showed increase after 4 weeks (P < .05). Conclusion: An oxide layer with appropriate crystal structure and amorphous sodium titanate layer can be obtained on titanium implants through alkali and heat treatment in the atmosphere, and even alkali and heat treatment in vacuum conditions, provided a bioactive surface containing sodium. These surface layers can be considered to be effective for enhancement of osseointegration and reduction of healing period for implant treatment.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.61-75
• /
• 2011

A Geographic Information System(GIS) is a system that captures, stores, analyzes, manages and presents data with reference to geographic location data. In the later 1990s and earlier 2000s it was limitedly used in government sectors such as public utility management, urban planning, landscape architecture, and environmental contamination control. However, a growing number of open-source packages running on a range of operating systems enabled many private enterprises to explore the concept of viewing GIS-based sales and customer data over their own computer monitors. K telecommunication company has dominated the Korean telecommunication market by providing diverse services, such as high-speed internet, PSTN(Public Switched Telephone Network), VOLP (Voice Over Internet Protocol), and IPTV(Internet Protocol Television). Even though the telecommunication market in Korea is huge, the competition between major services providers is growing more fierce than ever before. Service providers struggled to acquire as many new customers as possible, attempted to cross sell more products to their regular customers, and made more efforts on retaining the best customers by offering unprecedented benefits. Most service providers including K telecommunication company tried to adopt the concept of customer relationship management(CRM), and analyze customer's demographic and transactional data statistically in order to understand their customer's behavior. However, managing customer information has still remained at the basic level, and the quality and the quantity of customer data were not enough not only to understand the customers but also to design a strategy for marketing and sales. For example, the currently used 3,074 legal regional divisions, which are originally defined by the government, were too broad to calculate sub-regional customer's service subscription and cancellation ratio. Additional external data such as house size, house price, and household demographics are also needed to measure sales potential. Furthermore, making tables and reports were time consuming and they were insufficient to make a clear judgment about the market situation. In 2009, this company needed a dramatic shift in the way marketing and sales activities, and finally developed a dedicated GIS_based market analysis and sales management system. This system made huge improvement in the efficiency with which the company was able to manage and organize all customer and sales related information, and access to those information easily and visually. After the GIS information system was developed, and applied to marketing and sales activities at the corporate level, the company was reported to increase sales and market share substantially. This was due to the fact that by analyzing past market and sales initiatives, creating sales potential, and targeting key markets, the system could make suggestions and enable the company to focus its resources on the demographics most likely to respond to the promotion. This paper reviews subjective and unclear marketing and sales activities that K telecommunication company operated, and introduces the whole process of developing the GIS information system. The process consists of the following 5 modules : (1) Customer profile cleansing and standardization, (2) Internal/External DB enrichment, (3) Segmentation of 3,074 legal regions into 46,590 sub_regions called blocks, (4) GIS data mart design, and (5) GIS system construction. The objective of this case study is to emphasize the need of GIS system and how it works in the private enterprises by reviewing the development process of the K company's market analysis and sales management system. We hope that this paper suggest valuable guideline to companies that consider introducing or constructing a GIS information system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.6
• /
• pp.175-183
• /
• 2016

The government set up "national happiness, the hope of a new era of national vision under' job center of the creative economy" to achieve by national goals in the first and figure achieved through the establishment of new growth engines of the youth unemployment problem solve and national level there are a number of business start-up support. September 8, 2015 announced the Government's look at the '2016 Year of the budget, the government for new growth engines greatly promoted the venture entrepreneurship ecosystem revitalization and research and development (R & D) the business for enhanced performance in 2017. According to the direction of this study is to evaluate the current creative economy business incubator at the comparison whether the correct orientation mainly entrepreneurs, entrepreneurs preliminary recognition of student entrepreneurship ecosystem. Entrepreneurs 113 people in that way, 71 people pre-entrepreneurs, students 60, workers were founding agencies conducted an online survey of 47 people, 16 people Investors, 50 public and 11 additional persons including a total of 368 people. This study is in line with the orientation of these entrepreneurs to create economic status and recognition of the Republic of Korea entrepreneurship ecosystem, pre- entrepreneurs, students will examine the comparative analysis around. Analysis, social perception of entrepreneurship is somewhat higher than it was confirmed that the negative response of 32.2% to 36.3% of positive response. Social awareness of entrepreneurs showed a 2-fold higher response rate than the negative of response of 17.1% to 41.7% responding that positive recognition for the current start-up environment is bad, the response is good response to higher response rate than 23.5% to 41.1% It showed. The percentage of responses that better respect the entrepreneurship environment of the future Republic of Korea showed a higher response rate than the rate of 23% in response to deteriorate to 41.2%, with 52.9% awareness is the percentage that responded that the bad part about the ruthless Korea's entrepreneurship environment in China good part as response rate approximately three times greater than the 17.7% showed high response rates. Social awareness of entrepreneurs experience the presence of the founding start-up experience was confirmed that the more negative the number increases, the more the contrary the number of start-up experience increased awareness of the current and future environment of entrepreneurship was identified as a positive entrepreneurship environment. Also recognized was confirmed to change the parent of the more positive changes in the start-up of entrepreneurs doctor also positive about entrepreneurship, start-up entrepreneurs start with a doctor's motivation for founding non-economic reasons than for economic reasons has confirmed Higher. This study showed the overall level overview analysis of the status and recognition of the Republic of Korea entrepreneurship ecosystem. Future studies need to be a proposal for an existing previous studies for more precise direction to go forth to analyze the entrepreneurship ecosystem with a focus on problems and improvement of the Republic of Korea entrepreneurship ecosystem.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.53-62
• /
• 2013

Land-use/cover changes not only amplify or alleviate influence of climate changes but also they are representative factors to affect environmental change along with climate changes. Thus, the use of land-use/cover changes scenario, consistent climate change scenario is very important to evaluate reliable influences by climate change. The purpose for this study is to predict and analyze the future urban growth considering social and economic scenario from RCP scenario suggested by the 5th evaluation report of IPCC. This study sets land-use/cover changes scenario based on storyline from RCP 4.5 and 8.5 scenario. Urban growth rate for each scenario is calculated by urban area per person and GDP for the last 25 years and regression formula based on double logarithmic model. In addition, the urban demand is predicted by the future population and GDP suggested by the government. This predicted demand is spatially distributed by the urban growth probability map made by logistic regression. As a result, the accuracy of urban growth probability map is appeared to be 89.3~90.3% high and the prediction accuracy for RCP 4.5 showed higher value than that of RCP 8.5. Urban areas from 2020 to 2050 showed consistent growth while the rate of increasing urban areas for RCP 8.5 scenario showed higher value than that of RCP 4.5 scenario. Increase of urban areas is predicted by the fact that famlands are damaged. Especially RCP 8.5 scenario indicated more increase not only farmland but also forest than RCP 4.5 scenario. In addition, the decrease of farmland and forest showed higher level from metropolitan cities than province cities. The results of this study is believed to be used for basic data to clarify complex two-way effects quantitatively for future climate change, land-use/cover changes.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.279-287
• /
• 1997

This study was carried out to identify the analysis of vegetation-environment relationships of the coniferous forests in subalpine districts of Mt. Chiri by two-way indicaton species analysis(TWINSPAN) and CCA. The results are summarized as follows; The subalpine coniferous forest in Mt. Chin was classified Abies koreana community group by the TWINSPAN method. The Abies koreana community group was classified Abies koreana-Pinus densiflora, Abies koreana-Quercus mongolicd and Abies koreana-Picea jezoensis. The Abies koreana-Quercus mongolica community classified into two subcommunities, typical and Pinus koraiensis subcommunity. The Abies koreana-Picea jezoensis community classified into three subcommunities such as typical, Taxus cuspidate and Cornus controversa subcommunity. The subalpine conifers commnities in Mt. Chiri could be classified into six vegetation units, which consisted of three vegetation communities and five subcommunities. The relationship between vegetation community and influencing environmental factors was analyzed by using the CCA ordination method. It was found that altitude, concentrations of $Ca^{++}$ and $Mg^{++}$ in soil were, major environmental variables, which influence the distribution of vegetation community in the first axis, and $Ca^{++}$ and altitude in the second axis. In the relations of communities and environmental factors by CCA, the optimal ecological habitats of Abies koreana-Pinus densiflora community could be located at low elevations, in which $Ca^{++}$ and $Mg^{++}$ are rich. Abies koreana-Quercus mongolica community prefers the sites in mid-elevation zone, in which $Ca^{++}$ and $Mg^{++}$ are medium level in soil. The optimum site for Abies koreana-Pinus koraiensis community and Abies koreana-Taxus cuspidata community could be high elevations in which $Ca^{++}$ and $Mg^{++}$ are poor. Abies koreana-Cornus controversa community is found in the site at low elevations where $Ca^{++}$ and $Mg^{++}$ are medium.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.180-186
• /
• 2008

Purpose: This study was performed to evaluate the effect of the implant recipient site preparation methods on primary stability of implants with the instruments of $Osstell^{TM}$ and $Periotest^{(R)}$ in the iliac bone of cadaver. Methods and materials: The 8 iliac bones in 4 cadavers and implants treated with resorbable blasting media (RBM) were used. $Periotest^{(R)}$ (Simens AG, Germany) and $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden) were used to measure primary stability of implants. Implants were inserted into the iliac crest of the cadaver. In control group, the recipient site was prepared according to the manufacturer's recommendation: 1.8 mm guide drill, 2.0 mm initial drill, 2.7 mm pilot drill, 2.7 mm twist drill, 3.0 mm twist drill, 3.3 mm pilot drill, 3.3 mm twist drill, and 3.3 mm countersink drill as well as tapping drill were used in order. In the group 1, implant recipient sites were prepared by sequentially drilling from 1.8 mm guide drill to 3.0 mm twist drill and then inserted implants without countersinking and tapping. In the group 2, implant recipient sites were prepared to 3.0 mm twist drill and countersink drill and then inserted implants without tapping. In the group 3, the sites were prepared to 3.0 mm twist drill and countersink drill as well as tapping drill. In the group 4, the sites were prepared to 3.3 mm twist drill. In the group 5, the sites were prepared to 3.3 mm twist drill and countersink drill. A total of 60 implants were placed (n=10). The stability was measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally and buccolingually. To compare the mean stability of each group statistically, One-way ANOVA was used and correlation of instrument were analyzed using SPSS 12.0. The results obtained were as follows; 1. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ buccolingually showed the highest, and there are significant difference statistically between control group and experimental group 1,2,4 in each instruments respectively (p<0.05). 2. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally showed the highest. There are significant difference statistically between control group and all experimental groups in $Osstell^{TM}$, and between control group and experimental group 1,2,3,4 (p<0.05). 3. There are high correlation between the measurements of $Osstell^{TM}$ and $Periotest^{(R)}$ (p<0.05). Conclusion: These results indicate that the primary stability of implant can be obtained by the recipient sites preparation with smaller diameter drill than that of implant or minimal drilling.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.84-95
• /
• 2013

Recently, to prevent damage to the landscape, outstanding landscape areas have been designated in advance. In particular, as a fundamental way to evaluate landscape elements, landscape diversity is an important criterion to assess an area with a high conservative value. Therefore, the purpose of this study is to develop a quantitative evaluation model of landscape diversity based on landscape elements and to verify the model by applying it to the study sites. The assessment indicators derived from the literature analysis are topography, vegetation, land-use pattern, and unusual landscape. Topography diversity is subdivided into land undulation and land-form. Vegetation diversity is subdivided into plant community diversity and stratification diversity. To quantitatively analyse each indicator's diversity, SHDI was selected as the central metric. All of the quantitative measures were implemented by using the statistical tool, FRAGSTATS. Through the process of each indicator's standardization and summary, the final landscape diversity index was calculated. The results of the study are significant as it was the initial study of landscape diversity evaluation to seek applicability. However, the results of the Landscape Diversity Evaluation Model in this study based on 4 indicators synthetically demonstrate that more than one or two outstanding indicators can be underrated. Therefore, each 4 assessment indicator results should be considered individually. Furthermore, using the maximum value for each indicator's standardization reflects that it is necessary to analyse various examples to obtain higher objectivity later.