• 한국심리학회지 : 문화 및 사회문제
• /
• 제15권2호
• /
• pp.319-338
• /
• 2009

본 연구는 차량 운전 중 운전자가 원하는 속도만큼 속도를 내지 못하는 상황이 운전 스트레스에 어떠한 영향을 미치는지를 알아보고자 실시되었다. 운전자의 속도에 대한 욕구좌절은 희망 주행속도와 실제 주행속도의 차이로 구성개념화 되었다. 연구결과 4가지 도로조건(고속도로, 국도도로, 시내도로, 시골도로) 모두에서 운전자들의 희망 주행속도는 실제 주행속도보다 높게 나타났다. 4가지 도로조건(고속도로, 국도도로, 시내도로, 시골도로)을 종합한 평균 속도 욕구좌절은 운전 스트레스 척도 모든 점수(전체 DSQ점수, 전체 DSI점수, 전체 DSF점수, 진행장애 요인, 운전환경 요인, 사고단속 요인, 교통법규 요인, 시간압력 요인)들에 정적으로 유의한 영향을 미치는 것으로 나타났다. 특히, 속도 욕구좌절이 높아짐에 따라 운전 스트레스 척도의 강도 점수와 진행장애 요인, 시간압력 요인 등이 다른 운전 스트레스 척도 점수들보다 더 큰 영향을 받는 것으로 나타났다. 평균 속도 욕구좌절을 백분위 점수에 따라 4가지 수준으로 구분하여 운전 스트레스 척도 점수들과 과속단속 그리고 가해·피해 교통사고 경험 차이를 분석하였다. 분석결과 속도 욕구좌절이 높은 운전자들은 속도 욕구좌절이 낮은 운전자들보다 운전 스트레스 척도의 점수들도 유의하게 높은 것으로 나타났다. 하지만, 속도 욕구좌절 정도에 따른 과속단속 경험이나 가해·피해사고 경험은 차이가 나타나지 않았다.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.28-44
• /
• 2002

Wavelet transformation in image compression is to offer higher image compressibility and high-quality by quantization and entropy encoding. More image quality is good that reconstructed image by wavelet calculation than acquire cosine transform. Therefore, wavelet itself is function if it is wavelet's feature, in this function, do processing applying difference scale and resolution. That is, this is not that fixed resolution has been decided like existent compression way, when it regulated scale, damage goes in pixel and picture looks like break without giving damage entirely in reflex even if magnify or curtail Decoding. Therefore, this paper is in Image that using new wavelet application compression way research that see applies comparing In each image noted this time compressing step by step with circle image compression efficiency recognize. Also, estimated quality pass through by printing of compressed image, investigated compression ratio of most suitable that get print of high quality and elevation of transmission speed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.75-76
• /
• 2010

고성능 철근으로 휨 보강된 이방향 슬래브를 제작하고 펀칭 전단실험을 실시하였다. 휨철근의 항복강도, 휨 철근비 및 기둥 인접부 휨철근의 집중배근을 변수로 하여 실험하였고, 펀칭 전단강도, 균열후 강성, 변형률 분포, 균열제어 효과 등을 비교, 분석하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.53-57
• /
• 2001

The way to reduce wear quantity of numerical control machine tool slideway is highfrequency heat treatment process for slideway in GC300 By using this way mentioned above We can expect the increase of Rockwell hardness from Rockwell hardness 30 to 48∼55. The deformation quantity caused by high-frequency heat treatment results in increasing nonwork time at the following process grinding work so it is important that we minimize the deformation quantity as much as possible. This thesis will propose one of the ways to minimize nonwork time at grinding work we first prospect the deformation quantify and process the rough cutting considering the data.

• 한국식품조리과학회지
• /
• 제8권1호
• /
• pp.49-56
• /
• 1992

This study aims to get basic datea on the usual dietary forms of many korean families bringing up either elementary, or junior high or senior high students. Our interest is focused on which factor is decisive in shaping their diet, which way of cooking is preferred and how the korean traditional way of diet is preserved. 407 of housewives of suweon city answered the questions, and the result shows that more than half of them (54.1%) decide the contents of their diet according to their husbands’ taste 77.4% of them regard dinner as the most important meal. The number of side dishes are usually 3 or 4 (57.2%). In preparing their diet, 41% take account of ‘taste’ first, but for many of college graduate housewives ‘nutrition’ is the primary concern. As for main dish, cooked rice (55.3%), and soybean soup (66.1%) are preferred. Both meat and fish are commonly grilled. 83.1% of them enjoy dining out once or twice a month, and when they they dine out, korean-style restaurant is preferred (43.7%). The most frequently used processed food is ham (19.2%), and secondly, ramyon (17.8%).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1383-1386
• /
• 1990

Fuzzy theory may be constructed of Fuzzy sets theory, Fuzzy measurement and Appoximate reasoning, and nowadays the reseaches on it are done widely in both theoretical and practical aspects. In this paper, the authors sought for the subject in Hirota's Fuzzy CAI: A decision making simulated fuzzy problem on the speed and accelerator control of a car driven in the high way. Interesting results on these fuzzy solutions of this problem, based on a defuzzification with 9 kinds of the methods, are reported. And the characters of these solutions, linear or nonlinear and their fuzzy control evaluations are stated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.96-96
• /
• 2010

Magnesium alloy is being used for structural material since it has high specific strength. Tubular shape was effective way for enhanced structural design. To manufacture the tube, it is necessary to weld the butted joint of both tubular formed sides. But the magnesium alloy was hardly welded with conventional welding processes. The laser welding was effective way to joint magnesium alloys because it had high weld strength and productivity compare with other welding processes. In this study, magnesium alloy sheets was formed at elevated temperature to tubular shape and welded with laser. Consequently, the magnesium alloy tube was making successful with warm forming and laser welding and bicycle frame was making with it.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.594-600
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat a conductive workpiece by means of high-frequency electric current caused by electromagnetic induction. Because the induction heating is a convenient and efficient way of indirect heating, it has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers an experimental investigation on the rapid heating using the induction heating and rapid cooling using a vortex tube in order to eliminate an excessive cycle time increase. Experiments are performed in the case of a steel cup mold core with various heating and cooling conditions. Temperature is measured during heating and cooling time, from which appropriate mold heating and cooling conditions can be obtained.

• East Asian mathematical journal
• /
• 제28권4호
• /
• pp.453-474
• /
• 2012

The conic sections is an important topic in the current high school geometry. It has been recognized by many researchers that high school students often have difficulty or misconception in the learning of the conic sections because they are taught the conic sections only with algebraic perspective or analytic geometry perspective. In this research, we suggest a way of teaching the conic sections using a dynamic geometry software based on some mathematics teaching and learning theories such as Freudenthal's and Dienes'. Students have various experience of constructing and manipulating the conic sections for themselves and the experience of deriving the equations of the quadratic curves under the teacher's careful guidance. We identified this approach was a feasible way to improve the teaching and learning methods of the conic sections.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.559-564
• /
• 2002

This paper describes a new algorithm named as ray following algorithm which is applied for high-resolution satellite image simulation. The problems of the conventional ray tracing algorithm are pointed out especially when terrain elevations vary abruptly. The proposed algorithm follows the directional ray vector sequentially and thoroughly in order to determine the crossing point of the ray with the terrain surface. This way of sequential height comparison method is regarded as the only way to obtain accurate surface cross-section when a highly variant digital surface model is used. The experimental results show and compare the validities of the conventional and proposed algorithms.