• KSBB Journal
• /
• v.15 no.4
• /
• pp.342-345
• /
• 2000

A novel pre-purification method was developed for producing peroxidase to guarantee high purity and yield from plant cell cultures in large-scale process. This method was a simple and efficient procedure for the isolation and pre-purification of peroxidase from the biomass consisting of active clay treatment followed by cationic exchange chromatography. The use of active clay in the pre-purification process allows for rapid and efficient separation of peroxidase from interfering compounds and dramatically increases yield and purity of crude peroxidase for purification steps compared to alternative processes. This pre-purification process serves to minimize the buffer usage size and complexity of the HPLC operations for peroxidase purification. This process is readily scalable to a pilot plant and eventually to a production environment where mass production of material are expected to be produced.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.591-598
• /
• 2006

The research was tried to investigate the hydrogen generation from water by the pulsed power plasma process. Hydrogen was generated by way of the electrical pulse power discharge process with the ultrasonic wave. The yield on the hydrogen generation was also studied with and without operating the ultrasonic generator, in which the applied high voltage was varied from 10 kV to 15 kV. Nitrogen and argon gases were used as working gases. As the results, the generation yield using the pure nitrogen gas is better than argon and mixed gases such as argon and nitrogen. Hydrogen concentration are significantly increased when the ultrasonic generator was operated with the electrical discharge simultaneously. It is increased with increasing the applied ultrasonic level as well.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.118-125
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quality alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70 t/y and the pilot plant of 360 t/y had been developed. Main research contents in this step were the process performance test of pilot plant of 360 ton/year and the development of demonstration plant of 3,000 t/y, which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/y showed about 80% yield of liquid product, which was obtained by both light gas oil(LGO) and heavy gas oil(HGO), The boiling point range distribution of LO product that was mainly consisting of olefin components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• Journal of Ginseng Research
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2000

To develop a new ginseng variety with good quality and high yielding, a lot of individual ginseng plant were selected in the farmers′ fields in 1968. Among them, a promising line, 680-98-2, has been developed through comparative cultivation of several lines selected with pure line separation from local races in Korea Ginseng & Tobacco Research Institute. Preliminary and advanced yield trials were performed for 8 years. 1) One of them was designated as KG102 and it was then registered as a new variety "Yunpoong" with the regional yield and adaptation trials for 10 years (1981-1990) on November 30, 1998 in Korea.2) For the root characters, the diameter of taproot and ratio of the taproot length to the diameter of Yunpoong were bigger and lower than those of Jakyungiong. Root yield was 27.3% higher in Yunpoong than Jakyungiong.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.89-98
• /
• 1996

A novel polymeric sunscreen agent was developed. It was prepared by the coupling reaction of 2-ethylhexyl 4-hydroxycinnamate with poly vinylbenzyl chloride(PVBC, average MW 6,500). In this reaction the reactivity was mostly affected by catalyst. In the absence of catalyst the yield was approximately 55% and in the presence of tetrabutylammonium bromide the yield was about 65%, but in the presence of tetrabutylammonium iodide the yield was 100% to give a average molecular weight 20,000 polymeric sunscreen agent. There were no side reactions, and its structure and purity were confirmed by various analytical methods, such as NMR, IR, and so on. UV radiation absorption efficiency is more than 70% compared with that of octyl methoxycinnamate. The solubility in polar oil, for example C12-15 alkylbenzoate and caprylic/capric triglyceride, is more than 50%. It showed high stability in the time course of test including acceleration test. This polymer is safe to skin because of poor permeability to skin, no side products in the process of preparing, and easy elimination of excess starting materials.

• Journal of Ginseng Research
• /
• v.22 no.1
• /
• pp.11-17
• /
• 1998

To develop a new ginseng varieties with good quality and high yielding, a lot of individual ginseng plants were selected in the farmer's fields in 1972. Among them, a promising line, 7259-3-1, has been developed through comparative cultivation of several lines selected with pure line separation of local races in Korea Ginseng '||'&'||' Tobacco Research Institute. Preliminary and advanced yield trials were performed for 8 years. It was then designated as "KG 101" and tested in the regional yield and adaptation trials for 10 years (1981-1990). KG101 has a green stem with light violet and orange-yellow fruit and flowers 3-7 days later than local race, Takyungjong. Taproot of KG101 was longer than local race Jakyungjong, and root yield of KG101 was 9% higher than local race Jakyungjong. In red ginseng quality, the rates of Chun-Jeesam (Chun and Jee means 1st and 2nd grade, respectively) were 22.3% and 9.4% for KG101 and Jakyungjong, respectively. In these results, it was clarified that KG101 was superior ginseng line with good quality.y.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.301-306
• /
• 1993

Effects of pressure and pressing time of soyprotein-CaSO4 coagulates on the yield, water holding capacity and textural characteristics of SPI (soy protein isolated) tofu were investigated. The tofu was prepared by addition of CaSO4 into SPI suspension at 9$0^{\circ}C$ and then compressed. As the compressing pressure increased from 8.66g /cm2 to 49.43g /cm2, the volume yield and moisture absorbed on filter paper were decreased and the textural properties of hardness, adhesiveness, cohesiveness and gumminess were increased. Increase in hardness and gumminess were more significant at high pressure than those at low pressure.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.392-397
• /
• 2022

Methane is one of the major greenhouse gases, recently, the biotechnological conversion from methane to high-value added chemicals have emerged as an effort to reduce methane gas emission. In this study, we optimized ectoine bio-milking conditions in which cells were repeatedly used to improve intracellular and extracellular ectoine yield from methane by using Methylomicrobium alcaliphilum 20ZDP2. First, the cultivation and intracellular ectoine accumulation conditions were optimized with respect to the growth phase and medium salinity to achieve the highest yield of synthesis. Second, ectoine excretion was optimized by determining the ectoine secretion time (15 min) in appropriate medium salinity under hypoosmotic conditions (1% NaCl). Finally, bio-milking of ectoine was successfully repeated more than 10 times using M. alcaliphilum 20ZDP2, and the ectoine yield was improved up to 129.29 mg/ DCW g.

• Journal of Welding and Joining
• /
• v.9 no.2
• /
• pp.44-50
• /
• 1991

The use of high tensile steel plates is increasing in the fabrication of ship and offshore structures. The softening region which has lower yield stress than base metal is located to prevent cracking in the conventional high tensile steel. Also, thermo mechanical control process(TMCP) steel with low carbon equivalent has the softening region which occurs in the heat affected zone when high heat input weld is carried out. The softening region in the high tensile steel gives rise to serious effect on structural strength such as tensile strength, fatigue strength and ultimate strength. In order to make a reliable structural design using high tensile steel plates, the influence of the softening on plate strength should be evaluated in advance. In the previous paper, the authors discussed the ultimate compressive strength of 50HT steel square plates with softening region. In this paper, the ultimate compressive strength with varying the yield stress of softening region and the aspect ratio of the plate is investigated by using the elasto-plastic large deformation finite element method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.53-64
• /
• 2004

The CRT(cathode ray tube) in oscilloscope consists of an electron gun, horizontal vertical deflection system and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by CRT precipitation method. But, this method has some defects that are complex process, low yield, much consumption of raw-material, dirty working environment, waste problem, require of high cost. Moreover phosphor for oscilloscope used at present has been imported from Japan. Therefore developments of new phosphor and new method(the screen printing) top form phosphor screen for oscilloscope are required to improve these matters. This study was developed novel method(the screen printing) to form the phosphor screen for oscilloscope used new phosphor. This screen printing method has advantages of simple process, high yield, clean working environment, saving raw material and running-cost.