• The KSFM Journal of Fluid Machinery
• /
• v.15 no.2
• /
• pp.57-62
• /
• 2012

The constant air volume flow fan can maintain constant flow rate to the wide range of exit pressure. Therefore, the use of this fan is increasing recently for ventilation of high building. Brushless DC motor is adopted to this fan because that has advantages of compactness and performance. But this type of motor protrude from impeller hub side to fan inlet. The Impeller inlet flow is influenced by size of this obstacle called hub. In this paper, the influence of hub shape on the fan performance characteristics are experimentally and numerically analyzed. CFX 12.0 is used to perform the fan internal flow analysis and numerical results are compared with the experiments. Depending on hub shape, internal loss is generated and the performance and efficiency are reduced. The best performance is occurred around $h/b_1$ = 0.25. The results of this study will be contribute to initial design of constant air volume flow fan development.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.3
• /
• pp.226-234
• /
• 2016

In this study Muffins adding each 0, 1, 3, 5 7% of Acai Berry powder, which has very high anti-oxidant constituent, have been made, and its quality characteristics have been surveyed. From the volume and specific volume measurement, it has been decreased for MA1, 1% of Acai Berry powder added muffin, but the tendency thereafter has shown increasing (p<0.001). From texture characteristics gumminess and chewiness of MA0, reference group, was the highest by 885.86 g/ cm and 6645.71 g, and has shown decreasing tendency as per the adding rate of Acai Berry powder increased (0.001). The electronics scavenging activity of MA7, 7% added muffin, was the highest by 68.91%, and the ascending order was MA1 < Reference Group < MA3 < MA5 < MA7. From the preference test of Acai Berry powder added muffin, MA3, 3% added muffin, was the most preferable one from color, taste as well as total preference. As the added volume of Acai Berry powder is 5% or more, the typical taste and flavor of Acai Berry gives influence to the taste and flavor of muffin, so the preference level has been decreased. Thus the added volume of Acai Berry powder 5% or more is not recommendable.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1609-1616
• /
• 2001

We present an autostereoscopic 3D display system using volume hologram. In this proposed system, the interference pattern of angular multiplexed plane reference and object beams are recorded into a volume hologram, which plays a role of guiding object beams of multi-view images into the desired perspective directions. For reconstruction, object beams containing the desired multi-view image information, which satisfy Bragg matching condition, are illuminated in the time-division multiplexed manner onto the crystal. Then multiple stereoscopic images are projected to the display plane for autostereoscopic 3D viewing. It is possible to make a high resolution multiview 3D display system independent upon the viewpoint.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.560-567
• /
• 2004

In this paper, the design and implementation of a high power(300W) forward converter using a planar transformer is presented. The overall size and volume of the converter is decreased by replacing a planar transformer in stead of using a conventional winding transformer. Due to the decreased size and volume, power density of the applied forward converter is increased. Also, in this paper, the 300W ZVS forward converter with active clamp snubber circuit is compared to the 300W hard switching forward converter planar transformer, the decreased size and volume, the 300W ZVS forward converter with active clamp snubber circuit, 30W hard switching forward converter.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.451-462
• /
• 2014

In this paper, Coordinated Semi-Actuated Signal Control algorithm was developed and evaluated. According to the analysis of simulation, the coordinated semi-actuated signal control led to reduced vehicle delay as the difference of traffic volume between major and minor streets was getting bigger. But when there was relatively high traffic volume, or the equivalent amount of traffic volume on major and minor streets, optimized pre-timed signal control was verified to lower delay times compared to coordinated semi-actuated signal control; however, it might increase pedestrian delay. Therefore, the coordinated semi-actuated signal control should be implemented at intersections where traffic volume is relatively low.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.188-192
• /
• 2013

The magnetic interaction effect on the magnetic activation volume and area of electrodeposited CoPt magnetic films was investigated. The dipolar interaction was predominant interaction mechanism for all samples. And the interaction strength was increased with decreasing current density and increased with increasing sample thickness. Although the activation volumes of the samples fabricated at low current density were larger than those of the high current density samples, the sample thickness seemed to have little influence on the variation of activation volume. But it was found that the activation area was apparently affected by the magnetic interaction strength as well as the current density.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.2
• /
• pp.157-164
• /
• 2012

Purpose : The Purpose of this study was on determine whether thoracic expension exercise might increase the pulmonary function of the patients with stroke. Methods : Fourty paients with stroke were randomly assigned to experimental(n=20) and control group(n=20). During four weeks, each group participated thirty minutes for five times per week. Subjects were assessed using pre-value and post-value measurement pulmonary function(Forced vital capacity, Forced expiratory volume at one second, FEV1/FVC, Peak expiratory flow, Tidal volume, vital capacity, Inspiratory capacity, Expiratory reserve volume, Inspiratory reserve volume). Results : These finding suggest that experimental group was significant increase in FVC, FEV1, PEF, TV, IC, IRV, ERV($p$<.05). In comparison of two group, experimental group was high pulmonary function than control group. Conclusion : This study showed experimental group can be used to improve pulmonary function than control group. Thus it indicates that the thoracic expension exercise will be more improved through the continued respiratory exercise program.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.46-50
• /
• 2008

Super duplex stainless steel has along life in severe environments because of its strength and corrosion resistance. If 0.2$\sim$0.3% Nitrogen in aninterstitial solid solution is added, the austenite structure is reinforced. This improves the solid solution hardening and the anticorrosionability. In this study, the mechanical properties and structures of the super duplex stainless steel with the 0.2% N additive were investigated to determine the effect of various volume fractions on the austenite phase. The various volume fractions and distributions of the austenite structure in the applied test specimens were obtained by changing the heat treatment temperature and cycle. The characteristics by amounts of the $\sigma$ phase obtained from the precipitation heat treatment were alsoinvestigated. From the results, when the austenite volume fraction increases, the tensile strength decreases and elongation increases. And the $\sigma$ phase was rapidly increased by increasing the heat treatment time. When the volume fraction of the $\sigma$ phase increased, tensile strength increased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1055-1062
• /
• 2004

As for the Production of internal combustion engines there has been further movement toward development of high Performance engines with improved fuel efficiency as well as a lightweight and a small size. These tendencies help to solve the problems in engines for example, such as thermal load. abnormal combustion and so on. In order to investigate these Problems, a thin film-type probe for measuring instantaneous temperature has been suggested. A method for manufacturing such a probe was established in this study The instantaneous surface temperature of a constant volume combustion chamber was measured by using this probe and the heat flux was obtained through Fourier analysis In order to thoroughly understand the characteristics of combustion. authors measured wall temperature of combustion chamber and calculated heat flux through a cylinder wall while varying the protrusion height of probe. For these Purposes, the instantaneous surface temperature probe was developed. thereby making possible the analysis of instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.109-115
• /
• 2017

The aim of this study is to investigate the effect of physical properties of fuels on spray characteristics in the gasoline direct injection system. Injection rate, spray visualization, and spray pattern experiments were performed to analyze the spray characteristics of ethanol, gasoline, and ethanol/gasoline blends. We measured injection rate of each fuel via the Bosch method. The spray visualization experiment was also carried out at atmospheric pressure using a high-speed camera. Finally, the average of drop surface area per unit volume was measured using the optical patternator. The experimental results from Bosch method showed that peak injection rate increased when the volume fraction of ethanol increased. In addition, higher viscosity of ethanol than that of gasoline leads to longer injection delay. At the initial injection region before reaching 0.8 ms, the spray tip penetration becomes longer as increasing the volume fraction of ethanol, but reversely shorter after 0.8 ms. It was found that ethanol makes spray angle become larger. The surface area per unit volume of the drop was decreased as the distance from the injection tip or the concentration of the gasoline increased.