• 자원리싸이클링
• /
• 제27권6호
• /
• pp.11-22
• /
• 2018

자력선별장비는 일반적으로 광산업 및 재활용 분야에서 사용되어 왔으며, 다양한 분야에서 폭넓게 활용되고 있다. 자력선별장비는 비철재료로부터 철 스크랩 분리를 위한 조립자용 선별장비와 3 mm 이하 미립 강자성체를 농축하기 위한 미립자용 선별장비로 구분된다. 또한 미립자용 선별장비는 저자력 선별장비와 고자력 선별장비로 세분된다. 저자력 선별장비는 강자성체나 높은 자화율의 상자성체를 분리하는데 사용되고, 고자력선별장비는 낮은 자화율의 상자성체를 분리하는데 사용된다. 저자력 및 고자력 선별장비 모두 습식과 건식으로 활용된다. 최근 0.7 Tesla미만 영역에서 활용되는 전자석 고구배자력선별장비는 1980년대 이후 상용화된 희토류 영구자석으로 제조된 자력선별장비로 점진적으로 대체되는 추세이며, 환경분야와 생물분야에서 합성자성물질과 관련된 나노기술의 확대는 향 후 자력선별기술의 발전에 긍정적으로 기여할 것으로 기대된다.

• 벤처창업연구
• /
• 제17권1호
• /
• pp.121-137
• /
• 2022

본 연구의 목적은 하이테크 소셜벤처의 사회적·경제적성과에 영향을 미치는 요인을 실증적으로 규명하여, 하이테크 소셜벤처와 관련 생태계 이해관계자에게 필요한 성공 요인과 통찰력을 제시하는 데 있다. 선행연구에 근거하여 핵심기술역량, 핵심비즈니스역량, 소셜미션지향의 세 가지 성과요인 차원을 구성하였고, 각 하위요인으로 기술혁신지향성, R&D역량, 비즈니스모델, 고객지향성, 소셜네트워크, 소셜미션추구를 도출하였다. 실증분석을 위해 국내 하이테크 소셜벤처를 대상으로 설문조사를 진행하였고, 회수된 243부의 유효한 자료는 PLS-구조 방정식 분석을 통해 가설의 유의성을 검정하였다. 분석 결과, R&D역량, 고객지향성, 소셜네트워크, 소셜미션추구는 모두 사회적·경제적 이중성과에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 기술혁신지향성은 사회적·경제적성과에 모두 유의한 영향을 미치지 못하는 것으로 나타났는데, 이는 표본기업들의 기술혁신지향성이 추상적인 조직문화적 특성으로만 내재되었기 때문에 발생한 것으로 추정한다. 비즈니스모델은 사회적성과에만 유의한 영향을 미쳤는데, 이는 사회적기업을 위해 개발된 측정도구의 한계로 추정되며, 원인 파악을 위한 추가 다집단분석 결과도 이와같은 추정의 근거를 뒷받침해 주었다. 본 연구는 사회적경제 생태계에 새롭게 등장하고 있는 하이테크 소셜벤처를 식별하고 선제적으로 실증 연구를 진행함으로써 관련 연구분야의 토대를 마련하였으며, 사회적기업 및 소셜벤처의 성과요인 연구와 실증적 연구모형을 확장시키는 계기가 되었다고 판단한다. 그러나 연구 방법이나 과정에 있어서, 사회적·경제적 이중성과의 균형을 위한 요인 도출이나 검증, 주관적 측정 방법, 표본의 대표성 등의 한계가 있었다. 향후 한계를 보완하고 개선된 연구모형을 설계하여, 더욱 심도 있는 후속 연구가 이어지기를 기대한다.

• 한국가시화정보학회지
• /
• 제14권1호
• /
• pp.40-45
• /
• 2016

Elimination of the smear layer and bacteria in the root canal is the most important in the endodontic treatment, and various irrigation devices have been developed. Nevertheless, it is hard to eliminate the smear layer and bacteria completely. In this paper, a micro bubble irrigation system has been developed for the root canal cleaning of tooth. Micro bubbles are generated when pressurized fluids passing through a porous material inside a hand-piece nozzle, and the bubbly flows excited by ultrasonic vibration are observed using a high-speed camera and a microscope. The results show that the diameter and number of bubbles increases with the applied pressure, and there found an optimum excitation frequency in order to minimize the bubble size. From in-vitro tests, it is also verified that the developed bubble irrigation system has the ability of antibacterial and infection removal. Thus, this biocompatible system would be well suited for root canal cleaning.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2008

A fuel cell power system among various alternative power sources has many advantages such as low-polluted, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few years of the twentieth century, much changed to stimulate new and expanding interest in fuel cell technology. This paper presents optimal design and operational features of stand-alone 500W PEMFC(Proton Exchange Membrane Fuel Cell) system which can be a substitute instead fossil fuel. The stack of PEMFC is composed of 35 laminated graphite, and a unit cell of the stack has electrical characteristics as below; 14W, 0.9V, 15A. The other components of BOP(Balance of Plant) are composed of hydrogen and nitrogen tanks, regulators, 3way 5solenoid valves, mass flow meters, etc.

• 4차산업연구
• /
• 제1권1호
• /
• pp.23-29
• /
• 2021

Purpose - Faced with the great change of the 4th industrial revolution and the addition of the COVID-19 pandemic, great confusion and crises are occurring in the retail environment as well. The purpose of this study is to suggest the necessity of establishing a methodology for applying retail tech to offline distribution channels in crisis. Research design, data, and methodology - After examining the recent developments of representative fields to which retail technology is applied, it is rearranged through consideration through previous studies. Result - The retail industry must transform into digital commerce through digital transformation. According to the development of retail technology, the distribution industry is at a time of change from the stage of brokering product and service transactions to a structure that creates value based on information on production and consumption. The business model of the distribution industry must be converted to a platform business model in which both consumers and producers become users. Conclusion - In-depth analysis of the cases has not been conducted, and there are limitations in that the development is somewhat insufficient due to insufficient prior research data. However, it is meaningful to suggest the necessity of finding a methodology for applying retail technology to overcome the crisis of offline retailers through quantitative research on the retail technology area.

• 한국지진공학회논문집
• /
• 제26권1호
• /
• pp.39-48
• /
• 2022

Many piping systems installed in the power plant are directly related to the safety and operation of the plant. Various dampers have been applied to the piping system to reduce the damage caused by earthquakes. In order to reduce the vibration of the piping system, this study developed a steel coil damper (SCD) with a straightforward structure but excellent damping performance. SCD reduces the vibration of the objective structure by hysteretic damping. The new SCD damper can be applied to high-temperature environments since it consists of steel members. The paper introduces a design method for the elastoplastic coil spring, which is the critical element of SCD. The practical applicability of the design procedure was validated by comparing the nonlinear force-displacement curves calculated by design equations with the results obtained from nonlinear finite element analysis and repeated loading test. It was found that the designed SCD's have a damping ratio higher than 25%. In addition, this study performed a set of seismic tests using a shaking table with an existing piping system to verify the vibration control capacity on the piping system by SCD. Test results prove that the SCD can effectively control the displacement vibration of the piping system up to 80%.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.755-760
• /
• 2023

In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.25-37
• /
• 2012

In recent year, the u-City construction projects which integrate IT technology into urban infrastructures are being pushed forward by many local governments. These projects contain various purposes in an aspect of regional economy : to reinforce a competitiveness of region by increasing efficiency of urban managements and to revitalize regional economy by stimulating the regional high-tech industries that related to u-City construction. In this context, regional economic impact assessment of u-City construction projects is particularly important because, it give us information about effectiveness of u-City construction policy as a stimulus of regional high-tech industries and the policy feasibility of u-City construction projects that can be a base of public projects. However, it is challenging to assess the impact of u-City projects on regional economy properly due to a lack of understanding about industrial classification, and specific industrial inputs related to u-City construction. In this study, we suggest u-City industrial classifications, and specific-industrial inputs induced by u-City construction projects based on associated legislations, business report for a u-City construction, and results from previous studies. Using these classification and industrial input, we also investigate the regional economic impacts of a u-City construction project in Wha-sung and Dong-tan cities employing Input-output analysis. The empirical results suggests that u-City industries have relatively high in production inducement, and value added inducement compared to input of other industrial sectors. These results indicate that regional economic impact of a Wha-sung and Dong-tan u-City construction project are relatively high, but economic impacts of u-City construction projects vary according to the regional industrial structure, and the specific expense accounts of u-City construction projects.

• World Technopolis Review
• /
• 제1권2호
• /
• pp.92-106
• /
• 2012

This study focuses on exploring the behaviours of high-tech start-up firms in response to the policy interventions undertaken to promote regional innovation in South Korea since 1997. High-tech start-ups and their technological entrepreneurship are increasingly considered by policy makers and academics to play a crucial role in the generation of innovation and economic development. However, this study started from a basic concern of why government intervention does not necessarily result in an increase of regional innovation capacity. To explain this concern, we constructed a new conceptual framework of 'government dependency' and apply this to 'Daedeok,' a regional innovation system in South Korea, to explore the reproduction of path dependency as an impact induced by innovation policy. This conceptual framework was developed by remodeling path dependency approaches through a systemic and interactive lens. An empirical study used qualitative interviews of start-up founders to delineate the emergence of a new development path and the extent to which dependency was reproduced in the Daedeok regional innovation system. Empirical analysis suggested that 'reliance' and 'persistence' were the crucial factors in the production and reproduction of the government dependency. Some firms accepted dependency as reliance, but others regarded it as policy utilization. Thus, a critical juncture could not be clearly identified in actors' behaviour. It was also unclear if dependency had hindered innovation, but it was shown that the regional and institutional contexts strongly influenced the reproduction process. The study concludes that the construct of government dependency can also provide useful insights into policy learning as well as the success of government interventions.

• 폴리머
• /
• 제37권6호
• /
• pp.669-676
• /
• 2013

탈미네랄화된 골분(demineralized bone particle, DBP)은 연골 형성의 유도인자로 사용되기 때문에 조직공학에서 널리 사용되는 생체재료이다. 본 연구에서는 in vivo 환경에서 디스크 재생 효과를 연구하기 위해 DBP를 poly(lactic-co-glycolic acid) (PLGA)에 첨가하여 다공성 지지체를 제조하였다. 디스크의 섬유륜 조직을 반으로 절개한 후, 수핵 조직을 제거하여 디스크 결손을 유발시켰다. 빈 공간에 PLGA, DBP/PLGA 지지체를 이식하여 in vivo 환경에서 조직공학적 디스크 재생을 관찰하였다. 1, 2 및 3개월 후 디스크를 적출하여 글리코스아미노글라이칸(glycosaminoglycan, sGAG) 및 콜라겐 합성 정도를 측정하였으며 조직학적 평가로 H&E, Safranin-O, Alcian blue 염색과 면역조직학적 평가로 제 I형 콜라겐, 제 II형 콜라겐 염색을 수행하였다. 그 결과 DBP/PLGA 지지체에서 sGAG 및 콜라겐 함량이 높은 것을 확인하였으며 추간판 디스크 재생의 가능성을 확인하였다.