• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.184-188
• /
• 2003

Voltage-current characteristics of High Temperature Superconductor(HTS) tapes after applying the current beyond their critical current was investigated. When over-current is applied, the current begins to flow through the metal sheath instead of superconductor. The HTS tapes quenched were analyzed using V-I curve with various magnitudes of current. Two kinds of tapes were compared with each other to examine the influence of critical current on quench development. As a result, it was found that the resistance of superconductors and joule heat due to the over-current affect current distribution in HTS tapes. Critical current of HTS tapes was considered as a main factor deciding over-current characteristics.

• 한국추진공학회지
• /
• 제18권2호
• /
• pp.67-72
• /
• 2014

본 연구에서는 HTPB에 보강제로 Carbon black이 충전된 라이너의 점도, 기계적 특성, 추진제와의 접착력을 고찰하였다. Carbon black이 충전된 라이너는 점도가 높아 수평원심 주조 방법으로 라이닝에 문제가 있었다. 이 문제점을 해결하기 위해 프리믹스를 $60^{\circ}C$에 6일 숙성시킴으로써, 점도 464 posie에서 200 posie로 감소시킬 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.250-253
• /
• 2015

A novel implantable CPW fed Apollian shaped antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate(ε_r=9.8 and thickness= 0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters such as return loss, xy-plane, xz-plane, and yz-plane etc., are measured and analyzed using the agilent vector network analyzer. The proposed antenna has substantial advantages, including low profile, miniaturization ability, lower return loss, better impedance matching, and high gain over conventional implanted antennas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.120-122
• /
• 2004

This paper describes the digital relay simulator by use of DSP for digital relay test. The simulator software has EMTP simulation data file conversion. user define simulation data generation. data analysis engine. etc. The simulator hardware design uses 32bit floating point DSP architecture to achivev flexibility and high speed operation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.43.1-43.5
• /
• 2015

Image-guided surgery potentially enhances intraoperative safety and outcomes in a variety of craniomaxillofacial procedures. We explore the efficiency of one intraoperative navigation system in a single complex craniofacial case, review the initial and recurring costs, and estimate the added cost (e.g., additional setup time, registration). We discuss the potential challenges and benefits of utilizing image-guided surgery in our specific case and its benefits in terms of educational and teaching purposes and compare this with traditional osteotomies that rely on a surgeon's thorough understanding of anatomy coupled with tactile feedback to blindly guide the osteotome during surgery. A 13-year-old presented with untreated syndromic multi-suture synostosis, brachycephaly, severe exorbitism, and midface hypoplasia. For now, initial costs are high, recurring costs are relatively low, and there are perceived benefits of imaged-guided surgery as an excellent teaching tool for visualizing difficult and often unseen anatomy through computerized software and multi-planar real-time images.

• 한국동물학회지
• /
• 제36권4호
• /
• pp.535-544
• /
• 1993

Sinca early 1930' Colitis taenia striate were introduced to the Donsgjin in Chollabukdo, where it hybridized with an endemic subspecies C. tiutheri. Protein electrophoresis revealed high levels of hybridization with intensive backcrossing occupied approximately 20 kilometers of the river. This is roughly one-half of tech historic range of the endemic species. The average frequency of introduced alleles of three diagnostic loci ranged 0.03-0.46 among 11 sites in tech svrnpatric area. Clinal patterns in allele frequencies suggest C. tiutheri were introduced in an upper reaches of the Dongjin and downstream dispersal of the introduced alleles followed. There is little linkasedisequilibrium between the diagnostic loci, suggesting the nuclear genomes of tech two subspecies are randomly associated. The evidence presented here and previously supports recognition of C. t. striata and C. t. lutheri as the typical subspecies.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.183-193
• /
• 1992

Compared with NR and HNBR compounds, the blend properties of NR/HNBR were studied. The heat, oil and ozone resistance of NR compounds were improved by blending HNBR, and these effects were more clearly revealed with elevating temperatures. For the overall stabilities of the compounds, it was resonable to use the carbon black under the 60phr. In the EV systems, high-saturated NR/HNBR and HNBR compounds showed similar total crosslink density in comparison with NR compounds. Interaction parameters calculated by stress-strain method showed widely varied value.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.36-40
• /
• 2016

This paper is about the analysis on the vibration characteristic of tooling units on the precision automatic lathe. The vibration characteristic of the machine tool is emphasized in accordance with the high precision of the various industries Including the various semiconductor devices and components sector. In this paper, the vibration analysis was performed in designed tooling units of precision automatic lathe. Through the analysis, it is calculated that the frequency of distribution in certain areas by review the resonant frequency and the amount of deformation. And designed model was verified to be a stable structure.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.439-440
• /
• 2014

본 논문에서는 발생전압이 충전전압보다 높은 경우는 Buck 컨버터로 동작하고 발생전압이 충전전압보다 낮은 경우 Boost 컨버터로 동작하는 모드 자체를 독립적으로 구현할 수 있는 새로운 형태의 DC-DC 컨버터를 제안함으로서 시비율 변화를 줄여 인덕터의 전류 리플을 줄임으로서 효율을 개선하고자 한다.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.42-47
• /
• 2019

In this research, we try to study the change of squareness in the cutting process while changing cutting conditions such as feed rate and spindle rotational speed with chromium molybdenum steel (SCM415) material and TiCN, TiAlN coated end mill tool. The TiCN coating tool had the best straightness at 4,000 rpm at a feed rate of 200 mm/min. The TiAlN coating tool was best measured at 3,000 rpm at a feed rate of 200 mm/min. TiAlN coated tools had excellent dimensional tolerance when comparing the coating tool specifics.