• 제목/요약/키워드: High-spin

검색결과 753건 처리시간 0.026초

실험적으로 유발시킨 VX2 동물모델에서의 Mn-phthalocyanine과 Mangafodipir trisodium의 비교영상 (The Comparative Imaging Study on Mn-phthalocyanine and Mangafodipir trisodium in Experimental VX2 Animal Model)

  • 박현정;고성민;김용선;장용민
    • Investigative Magnetic Resonance Imaging
    • /
    • 제8권1호
    • /
    • pp.32-41
    • /
    • 2004
  • 목적 : MnPC의 자기이완성질을 살펴보고, 토끼의 간에 이식한 VX2 암종을 이용해 자기공명영상에서 간의 조영증강형태를 관찰하고자하였다. 또한 간세포 특이성 조영제 사용 시와 비교하여 MnPC의 조직특이성 조영제로서의 가능성을 탐색해 보고자 하였다. 대상 및 방법 : 조영제 합성시 상자성 원소의 배위자로 phthalocyanine(PC)를 선택하였다. 2.01 g (5.2 mmol)의 phthalocyanine을 0.37g(1.4 mmol)의 manganese chloride와 $310^{\circ}C$에서 36시간동안 반응시킨 후 혼합물을 크로마토그래피 (CHC13: CH3OH=98:2, volume ratio)로 정제하여 2000 달톤의 분자량을 갖는 1.04 g $(46\%)$의 MnPC를 얻었다. 자기이완율은 MnPC를 0.1 mmol로 희석시켜 1.5 T (64 MHz)에서 측정하였다. VX2 암종은 토끼의 간실질 내에 종양세포 부유액을 주입해 실험적으로 유발시켰다. 모든 영상은 1.5 T MR장비에서 무릎관절코일을 사용하여 획득하였다. 본 연구에서 새로 개발된 거대분자 자기공명영상 조영제인 MnPC (4m-mol/kg)와 간세포 특이성 조영제인 Mn-DPDP (0.01 mmol/kg)가 사용되었으며 이들 조영제는 토끼의 이정맥을 통해 주입되었다. T1 강조영상은 스핀에코 (TR/TE=516/14 msec)와 고속다면회손경사회복 (TR/TE=80/4 m-sec, flip angle $60^{\circ}$)을 사용하여 얻었고, T2 강조영상의 획득을 위해서는 고속스핀에코 (TR/TE=1200/85 m-sec)를 사용하였다. 결과 MnPC의 1.5T (64MHz)에서의 자기이완율은 $R1=7.28\;mM^{-1}S^{-1}$, $R2=55.56\;mM^{-1}S^{-1}$ 이었고, MnPC의 높은 T2 자기이완율은 T2 강조영상에서의 정상 간실질의 신호강도를 감소시켜 간실질과 VX2 암종의 구분을 쉽게 하였다. MnPC 주입시 T1 강조영상에서는 간세포 특이성 조영제의 주입시보다 종양의 경계가 명확하였고, 조영증강은 주입후 최소한시간 이상 높게 유지되었다. 결론 : MnPC가 간세포로 흡수되어 담관으로 배설된다는 사실은 Mn-DPDP와 유사한 특성이며 이는 MnPC가 새로운 간특이성 조영제임을 확인시켜 준다. 또한 MnPC의 R2값이 기존의 조영제에 비해 매우 크다는 사실은 T1 조영제로서 뿐만 아니라 T2 조영제로서의 사용 가능성을 보여준다. 이러한 사실들을 좀더 정확하게 뒷받침하기 위해서는 임상적으로 사용되기 이전에 생체 내 그리고 시험관내 연구가 더 필요하며 다른 동물모델에서의 추가적인 연구가 요구된다.

  • PDF

Hot Wall Epitaxy(HWE)에 의한 ZnIn$_2S_4$ 단결정 박막 성장과 특성 (Growth and characterization ofZnIn$_2S_4$ single crystal thin film using hot wall epitaxy method)

  • 최승평;홍광준
    • 한국결정성장학회지
    • /
    • 제11권4호
    • /
    • pp.138-147
    • /
    • 2001
  • 수평 전기로에서 $ZnIn_{2}S_{4}$ 다결정을 합성하여 HWE(Hot Wall Epitaxy)방법으로 $ZnIn_{2}S_{4}$ 단결정 박막을 반절연성 GaAs(100) 기판 위에 성장시겼다. $ZnIn_{2}S_{4}$ 단결정 박막은 증발원의 온도를 $610^{\circ}C$, 기판의 온도를 $450^{\circ}C$로 성장시켰고 성장 속도는 0.5$\mu\textrm{m}$/hr로 확인되었다. $ZnIn_{2}S_{4}$ 단결정 박막의 결정성의 조사에서 $10^{\circ}$K에서 광발광 (photoluminescence) 스펙트럼이 433nm (2.8633 eV)에서 exciton emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡성 (DCRC)의 반폭치(FWHM)도 133 arcsec로 가장 작아 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 $293^{\circ}$K에서 각각 $8.51{\times}10^{17}electron{\textrm}{cm}^{-3}$, 291$\textrm{cm}^2$/V-s 였다. $ZnIn_{2}S_{4}$ 단결정 박막의 광전류 단파장대 봉우리들로부터 $10^{\circ}$K에서 측정된 ${\Delta}$Cr(crystal field splitting)은 0.1678 eV, ${\Delta}$So (spin orbit coupling)는 0.0148eV였다. $10^{\circ}$K의 광발광 측정으로부터 고품질의 결정에서 볼 수 있는 free exciton 과 매우 강한 세기의 중성 주개 bound exciton 등의 피크가 관찰되었다. 이때 증성 주개 bound exciton 의 반치폭과 결합 에너지는 각각 9meV와 26meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 130meV였다.

  • PDF

Hot Wall Epitaxy (HWE)법에 의한 AgGa$Se_2$ 단결정 박막 성장과 특성 (Growth and Characterization of AgGa$Se_2$ Single Crystal Thin Films by Hot Wall Epitaxy)

  • 홍광준;이관교;박진성
    • 한국재료학회지
    • /
    • 제11권5호
    • /
    • pp.419-426
    • /
    • 2001
  • AgGaSe$_2$ 단결정 박막은 수평 전기로에서 합성한 $AgGaSe_2$ 다결정을 증발원으로 하여, hot wall epitaxy (HWE) 방법으로 증발원과 기판 (반절연성-GaAs(100)) 의 온도를 각각 $630^{\circ}C$, $420^{\circ}C$로 고정하여 박막 결정 성장을 하였다. 10K에서 측정한 광발광 excition 스펙트럼과 이중결정 X-선 요동곡선 (DCRC) 의 반치폭 (FWHM )을 분석하여 단결정 박막의 최적 성장 조건을 얻었다. Hall효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293k에서 각각 4.89$\times$$10^{ 16}$/㎤, 129$\textrm{cm}^2$/V.s였다. 광전류 봉우리의 10K에서 단파장대의 가전자대 갈라짐 (splitting)에 의해서 측정된 $\Delta$C$_{r}$ (crystal field splitting)은 0.1762eV, $$\Delta$S_{o}$ (spin orbit splitting)는 0.2494eV였다 10K의 광발광 측정으로부터 고풍질의 결정에서 볼 수 있는 free excitors과 매우 강한 세기의 중성 주개 bound excitors등의 피크가 관찰되었다. 이때 중성 주개 bound ekciton의 반치폭과 결합에너지는 각각 BmeV와 14.1meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 141meV였다.rule에 의해 구한 불순물의 활성화 에너지는 141meV였다.

  • PDF

마이크로버블과 환원제를 이용한 습식 NO 및 SO2의 동시제거 (Simultaneous Removal of NO and SO2 using Microbubble and Reducing Agent)

  • 송동훈;강조홍;박현식;송호준;정용철
    • 청정기술
    • /
    • 제27권4호
    • /
    • pp.341-349
    • /
    • 2021
  • 연소시설에서는 화석연료에 포함된 질소와 황이 산소와 반응하여 대기 오염물질인 질소산화물(NOX)과 황산화물(SOX)을 발생시킨다. 인체에 유해하고 환경 오염을 야기하는 NOX, SOX를 저감하기 위해 전세계적으로 환경규제를 시행 중이며, 규제를 충족하기 위해 다양한 기술들을 적용하고 있다. 상용화된 NOX 및 SOX 저감방식들로 SCR (selective catalytic reduction), SNCR (selective non-catalytic reduction), WFGD (wet flue gas desulfurization) 등이 있으나 이 방식들의 단점들 때문에 NOX, SOX를 동시제거하는 연구가 근래 많이 수행되고 있다. 그러나 NOX, SOX 동시 제거 방식에서도 산화제 및 흡수제로 인한 폐수 발생에 대한 문제점, 특정 산화제를 활성화 하기 위한 촉매 및 전기분해 사용에 따른 비용 발생, 마지막으로 기체 산화제들 자체 유해성의 문제점을 가지고 있다. 따라서 본 연구에서는 NOX, SOX 동시처리 방식의 단점들을 보완하고자 고압분산기에서 생성된 마이크로버블과 환원제를 이용하여 비용절감 및 폐수처리 시 환경부하저감 가능성을 확인해 하고자 하였다. 분산기가 마이크로버블을 생성하는 것을 이미지 프로세싱과 ESR (electron spin resonance) 분석을 통해 확인하였으며, 마이크로버블만을 이용하여 온도에 따른 NOX, SOX 제거율 성능 테스트도 진행하였다. 뿐만 아니라 폐수를 저감하기 위해 환원제와 마이크로버블을 이용하여 습식으로 NOX 제거율 약 75%, SOX 제거율 99%를 달성하였다. 본 마이크로버블 시스템에 산화제를 함께 투여할 경우 NOX, SOX제거율 모두 99%이상을 달성 하였다. 이러한 연구 결과를 토대로 습식산화제거방식을 적용하는 시설의 단점이었던 비용 및 환경 문제를 해결함에 기여할 수 있을 것으로 기대 된다.

자기공명영상 시스템의 양자화잡음 분석 (Analysis of Quantization Noise in Magnetic Resonance Imaging Systems)

  • 안창범
    • Investigative Magnetic Resonance Imaging
    • /
    • 제8권1호
    • /
    • pp.42-49
    • /
    • 2004
  • 목적 : 자기공명영상시스템에서 양자화잡음을 분석하였다. 신호대양자화잡음비를 이론적으로 유도하였고 다양한 자기공명영상시스템에서 신호대양자화잡음비를 계산하였다. 이러한 계산으로부터 고자장영상시스템에서는 양자화잡음이 전체시스템의 신호대잡음비를 결정짓는 주된 잡음원이 될 수 있음을 보였다. 하드웨어의 교체없이 양자화잡음을 줄일 수 있는 방법들을 제시하였다. 대상 및 방법 : 자기공명영상에서 사용되는 Fourier 영상기법에서는 위상 및 주파수 인코딩 방법으로 자기공명신호를 공간주파수 형태의 신호로 변환하여 측정하게 된다. 따라서 공간주파수 영역에서 발생하는 양자화잡음을 재구성된 영상에서의 신호대양자화잡음비로 나타내었다. 컴퓨터 시뮬레이션 및 실험을 통하여 유도된 식의 타당성을 보였다. 결과 : 유도된 식을 이용하여 다양한 주 자장 및 수신 시스템에 대하여 신호대양자잡음비를 계산하였다. 양자화잡음은 신호의 크기에 비례하여 증가하므로 상대적으로 신호가 큰 고자장 시스템에서 보다 큰 문제점으로 부각될 수 있다. 많은 수신 시스템에서 채택하고 있는 16 bits/샘플 양자기로는 양자화 잡음이 고자장 시스템에서 기대되는 신호대잡음비의 향상을 제한할 수 있는 주된 잡음원이 될 수 있음을 보였다. 결론 : fMRI나 spectroscopy를 위하여 자기공명영상의 주 자장은 지속적으로 높아지고 있다. 고자장에서는 신호가 커지고, susceptibility와 스펙트럼의 분리가 커져서 fMRI 나 spectroscopy에 유리한 면이 많다. 양자화잡음은 신호의 크기에 비례하여 증가하기 때문에 만약 양자기의 변환 비트가 충분히 크지 않을 경우 양자화잡음이 커져 신호의 증가에 비례하는 신호대잡음비의 향상을 이룰 수 없다. 이 논문에서는 신호대양자화잡음비를 이론적으로 유도하고, 다양한 자장의 세기 및 수신 시스템에 대하여 신호대양자화잡음비를 계산함으로써 고자장에서, 특히 상대적으로 신호가 큰 3차원영상에서 , 양자화잡음이 전체 시스템의 신호대잡음비를 제한할 수 있는 주된 잡음원이 될 수 있음을 보였다. 근원적인 해결책은 아닐 수 있으나 oversampling과 에코의 센터를 비껴가는 샘플링으로 하드웨어의 향상없이 양자화잡음을 줄일 수 있는 방법을 제시하였다.

  • PDF

초상자성 나노 입자의 자기이완 특성에 관한 이론적 연구 (The Development of Theoretical Model for Relaxation Mechanism of Sup erparamagnetic Nano Particles)

  • 장용민;황문정
    • Investigative Magnetic Resonance Imaging
    • /
    • 제7권1호
    • /
    • pp.39-46
    • /
    • 2003
  • 목적 : 간(liver)과 림프절 특이성 등의 다기능성을 나타내는 미세 초상자성 산화철 입자(ultrasmall superparamagnetic iron oxide: USP IO)의 자기이완(magnetic relaxation)에 대한 이론적 모델을 제시하고 이러한 이론적 모델에 근거한 미세 초상자성 산화철 입자의 자기장의 세기에 따른 자기 이완시간의 변화를 컴퓨터 모의 실험을 통해 연구하였다. 대상 및 방법 : 초상자성 산화철 입자를 조영제로 사용하기 위해서는 생체적합성 고분자로 축약(encapsulation)시키게 되고 따라서 확산(diffusion) 및 전자스핀의 fluctuation 에 기인하여 발생하는 자유 물분자와 간접 상호작용인 "outsphere " 기전에 근거하여 자기이완모델을 개발하였다. 또한 초상자성체의 경우 자기 모멘트가 상자성 입자에 비해 최소 수백배에서 최대 수만배까지 더 크므로 일반적으로 상자성 조영제의 "out sphere" 기전에서 가정하는 저자장 근사치를 사용할 수 없고 따라서 본 연구에서는 Brillouin함수로 표현되는 총자화에 대한 표현을 적용하여 저자장뿐만 아니라 고자장의 경우까지를 모두 포함하는 "out sphere" 기전에 의한 T1 그리고 T2 이완율에 대한 모델을 개발하였다. 이렇게 개발된 자기이완모델을 사용하여 미세 초상자성 산화철 입자의 자기장의 세기에 따른 자기 이완시간의 변화를 symbolic computation tool 인 MathCad(MathCad, USA)를 사용한 컴퓨터 모의 실험을 통해 조사하였다. 결과 : 미세 초상자성 산화철 입자의 T1, T2 자기이완 특성은 먼저, 저자장 영역 (<1.0 Mhz)에서는 이론적 모델의 spectral density function에 들어 있는 두 개의 correlation time중 $\tau$$_{s1}$ 중 (T2의 경우 ${\tau}_{S2}$)이 주된 역할을 하는 것을 알 수 있었고 이는 결과적으로 이러한 나노자성체 입자들이 낮은 자기장하에서는 열적으로 야기된 자기모멘트들의 재배열이 주된 역할을 하는 것으로 해석할 수 있다. 한편 고자장 영역에서는 correlation time 중 $\tau$가 주된 역할을 담당하는데는 $\tau$는 나노 입자의 크기와 연관되어 있으며 고자장에서 입자 크기에 따른 T1 이완율(R1)과 T2 이완율(R2)의 차이는 이러한 입자크기의 차이에 의해 발생하는 것으로 해석할 수 있다. 나노입자에 포함된 철 원자수를 변화시키는 경우 철 원자수가 증가 할 수록 R1과 R2가 증가하는 결과를 나타내었다. 한편 온도변화에 따른 T1, T2 자기이완시간의 변화는 정상체온 근처의 제한적인 온도범위내에서 저자장 영역에서의 아주 작은 변화를 제외하고는 큰 차이를 보이지 않았으나 T1에 비해 T2에서 이러한 변화가 상대적으로 더 작게 나타났다. 결론 : 임상적 다기능성을 나타낼 가능성이 많은 것으로 보고되고 있는 미세 초상자성 산화철 입자의 자기이완에 대한 이론적 모델을 초상자성 나노입자의 물리적 특성에 기초하여 제시하였고 이러한 이론적 모델에 근거한 미세 초상자성 산화철 입자의 자기장의 세기에 따른 자기 이완시간의 변화를 컴퓨터 모의 실험을 통해 조사하였다.다.

  • PDF

위암 조직의 자기공명영상과 초음파 소견에 대한 비교 연구 (In Vitro Imaging of MRI and Ultrasound for Gastric Carcinoma)

  • 길성원;지금난
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권2호
    • /
    • pp.178-187
    • /
    • 2008
  • 목적 : 위암 조직의 종양 침범 깊이와 주위 조직으로의 침윤 정도를 초음파와 자기공명영상을 시행하여 그 진단적 유용성을 알아보고 자기공명영상의 경우 종양을 가장 잘 보여주는 펄스 연쇄에 대해 알아보고자 하였다. 대상 및 방법 : 위의 부분 혹은 전절제술을 받아 병리적으로 위암으로 확진된 53예의 제거된 위암 조직을 대상으로 하였다. 모든 조직은 자기공명영상과 고주파수 탐촉자로 초음파 영상을 얻었다. 각 조직에 대하여 자기공명영상과 초음파 소견을 각각 독립적으로 종양의 탐지 및 종양의 침범 깊이에 대하여 두 명의 방사선과 전문의가 합의하에 평가하였고 각각의 영상 소견을 병리 조직 소견과 비교하여 두 영상 기기 간에 진단의 정확도를 비교하였다. 자기공명영상은 스핀에코 T1 강조 영상, 위상 및 탈위상 경사에코 T1 강조영상, 고속스핀에코 및 단발포고속스핀에코 T2 강조영상의 다섯 펄스 연쇄를 얻었고 이 중 종양의 탐지와 묘출에 우수하다고 평가된 영상 기법을 알아보았다. 결과 : 조기 위암의 경우, 초음파 진단의 정확도는 77%로 자기공명영상의 진단적 정확도 59% 보다 우수하였으나 통계적으로 유의한 차이는 없었다 (p=0.096). 진행성 위암의 경우 자기공명영상이나 초음파 각각 97%와 84%의 높은 진단적 정확도를 보여주었으며 자기공명영상이 초음파에 비하여 통계적으로 유의하게 종양병기를 정확하게 진단했다 (p<0.001). 자기공명영상의 다섯 가지 펄스연쇄 중에 종양 침윤 깊이를 선명하고 정확하게 보여준다고 평가된 영상은 조기 위암과 진행성 위암 모두 고속스핀에코 T2 강조영상(75%)이었고, 특히 진행성 위암의 경우 총 93.5%에서 고속스핀에코 T2 강조영상이 우수한 영상 소견을 보였다. 결론 : 자기공명영상과 초음파는 진행성 위암 조직의 종양 병기를 평가하는데 높은 진단적 정확성을 갖고 있으며 자기공명영상이 초음파보다 통계적으로 유의하게 종양병기를 정확하게 진단했다. 위암 조직의 종양 병기를 평가하는데 가장 우수한 자기공명영상 기법은 고속스핀에코 T2 강조영상이었다.

  • PDF

Hydrogen and Ethanol Gas Sensing Properties of Mesoporous P-Type CuO

  • Choi, Yun-Hyuk;Han, Hyun-Soo;Shin, Sun;Shin, Seong-Sik;Hong, Kug-Sun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.222-222
    • /
    • 2012
  • Metal oxide gas sensors based on semiconductor type have attracted a great deal of attention due to their low cost, flexible production and simple usability. However, most works have been focused on n-type oxides, while the characteristics of p-type oxide gas sensors have been barely studied. An investigation on p-type oxides is very important in that the use of them makes possible the novel sensors such as p-n diode and tandem devices. Monoclinic cupric oxide (CuO) is p-type semiconductor with narrow band gap (~1.2 eV). This is composed of abundant, nontoxic elements on earth, and thus low-cost, environment-friendly devices can be realized. However, gas sensing properties of neat CuO were rarely explored and the mechanism still remains unclear. In this work, the neat CuO layers with highly ordered mesoporous structures were prepared by a template-free, one-pot solution-based method using novel ink solutions, formulated with copper formate tetrahydrate, hexylamine and ethyl cellulose. The shear viscosity of the formulated solutions was 5.79 Pa s at a shear rate of 1 s-1. The solutions were coated on SiO2/Si substrates by spin-coating (ink) and calcined for 1 h at the temperature of $200{\sim}600^{\circ}C$ in air. The surface and cross-sectional morphologies of the formed CuO layers were observed by a focused ion beam scanning electron microscopy (FIB-SEM) and porosity was determined by image analysis using simple computer-programming. XRD analysis showed phase evolutions of the layers, depending on the calcination temperature, and thermal decompositions of the neat precursor and the formulated ink were investigated by TGA and DSC. As a result, the formation of the porous structures was attributed to the vaporization of ethyl cellulose contained in the solutions. Mesoporous CuO, formed with the ink solution, consisted of grains and pores with nano-meter size. All of them were strongly dependent on calcination temperature. Sensing properties toward H2 and C2H5OH gases were examined as a function of operating temperature. High and fast responses toward H2 and C2H5OH gases were discussed in terms of crystallinity, nonstoichiometry and morphological factors such as porosity, grain size and surface-to-volume ratio. To our knowledge, the responses toward H2 and C2H5OH gases of these CuO gas sensors are comparable to previously reported values.

  • PDF

THE INITIAL CONDITIONS AND EVOLUTION OF ISOLATED GALAXY MODELS: EFFECTS OF THE HOT GAS HALO

  • Hwang, Jeong-Sun;Park, Changbom;Choi, Jun-Hwan
    • 천문학회지
    • /
    • 제46권1호
    • /
    • pp.1-32
    • /
    • 2013
  • We construct several Milky Way-like galaxy models containing a gas halo (as well as gaseous and stellar disks, a dark matter halo, and a stellar bulge) following either an isothermal or an NFW density profile with varying mass and initial spin. In addition, galactic winds associated with star formation are tested in some of the simulations. We evolve these isolated galaxy models using the GADGET-3 N-body/hydrodynamic simulation code, paying particular attention to the effects of the gaseous halo on the evolution. We find that the evolution of the models is strongly affected by the adopted gas halo component, particularly in the gas dissipation and the star formation activity in the disk. The model without a gas halo shows an increasing star formation rate (SFR) at the beginning of the simulation for some hundreds of millions of years and then a continuously decreasing rate to the end of the run at 3 Gyr. Whereas the SFRs in the models with a gas halo, depending on the density profile and the total mass of the gas halo, emerge to be either relatively flat throughout the simulations or increasing until the middle of the run (over a gigayear) and then decreasing to the end. The models with the more centrally concentrated NFW gas halo show overall higher SFRs than those with the isothermal gas halo of the equal mass. The gas accretion from the halo onto the disk also occurs more in the models with the NFW gas halo, however, this is shown to take place mostly in the inner part of the disk and not to contribute significantly to the star formation unless the gas halo has very high density at the central part. The rotation of a gas halo is found to make SFR lower in the model. The SFRs in the runs including galactic winds are found to be lower than those in the same runs but without winds. We conclude that the effects of a hot gaseous halo on the evolution of galaxies are generally too significant to be simply ignored. We also expect that more hydrodynamical processes in galaxies could be understood through numerical simulations employing both gas disk and gas halo components.

Effects of Al2O3 Coating on BiVO4 and Mo-doped BiVO4 Film for Solar Water Oxidation

  • Arunachalam, Maheswari;Yun, Gun;Lee, Hyo Seok;Ahn, Kwang-Soon;Heo, Jaeyeong;Kang, Soon Hyung
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권4호
    • /
    • pp.424-432
    • /
    • 2019
  • Planar BiVO4 and 3 wt% Mo-doped BiVO4 (abbreviated as Mo:BiVO4) film were prepared by the facile spin-coating method on fluorine doped SnO2(FTO) substrate in the same precursor solution including the Mo precursor in Mo:BiVO4 film. After annealing at a high temperature of 450℃ for 30 min to improve crystallinity, the films exhibited the monoclinic crystalline phase and nanoporous architecture. Both films showed no remarkably discrepancy in crystalline or morphological properties. To investigate the effect of surface passivation exploring the Al2O3 layer, the ultra-thin Al2O3 layer with a thickness of approximately 2 nm was deposited on BiVO4 film using the atomic layer deposition (ALD) method. No distinct morphological modification was observed for all prepared BiVO4 and Mo:BiVO4 films. Only slightly reduced nanopores were observed. Although both samples showed some reduction of light absorption in the visible wavelength after coating of Al2O3 layer, the Al2O3 coated BiVO4 (Al2O3/BiVO4) film exhibited enhanced photoelectrochemical performance in 0.5 M Na2SO4 solution (pH 6.5), having higher photocurrent density (0.91 mA/㎠ at 1.23 V vs. reversible hydrogen electrode (RHE), briefly abbreviated as VRHE) than BiVO4 film (0.12 mA/㎠ at 1.23 VRHE). Moreover, Al2O3 coating on the Mo:BiVO4 film exhibited more enhanced photocurrent density (1.5 mA/㎠ at 1.23 VRHE) than the Mo:BiVO4 film (0.86 mA/㎠ at 1.23 VRHE). To examine the reasons, capacitance measurement and Mott-Schottky analysis were conducted, revealing that the significant degradation of capacitance value was observed in both BiVO4 film and Al2O3/Mo:BiVO4 film, probably due to degraded capacitance by surface passivation. Furthermore, the flat-band potential (VFB) was negatively shifted to about 200 mV while the electronic conductivities were enhanced by Al2O3 coating in both samples, contributing to the advancement of PEC performance by ultra-thin Al2O3 layer.