• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.43-49
• /
• 2003

The common-rail fuel injection system is becoming a common technology for High Speed Direct Injection(HSDI) diesel engines. The injection timing and rate are important factors for combustion control and pollutants formation mechanisms during engine operation. This paper introduces an estimation methodology of the injection timing and rate of a common-rail injector for HSDI diesel engines. A sliding mode observer that is based on the nonlinear mathematical model of the common-rail injector is designed to overcome the model uncertainties. The injector model and the estimator we verified by relevant injection experiments in an injector test bench. The simulation and the experimental results show that the proposed sliding mode observer can effectively estimate the injection rate of the common-rail injector.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.888-894
• /
• 2016

In this paper, we describe a method for precisely measuring the abrasion of the railway using an image processing technique. To calculate the wear of the rails, we provided a method for accurately matching the standard rail profile data and the profile data acquired by the rail inspection vehicle. After the lens distortion correction and the perspective transformation of the measured profile data, we used ICP Algorithm for accurate profile data matching with the reference profile extracted from the standard rail drawing. We constructed the prototype of the Rail Profile Measurement System for High-speed Railway and the experimental result on the three type of the standard rail used in Korea showed the excellent profile matching accuracy within 0.1mm.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.504-509
• /
• 2005

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.427-434
• /
• 2011

This paper is focused on application of recursive least squares method to estimate rail irregularities from the acceleration measurement on an axle-box or a bogie for the rail condition monitoring with in-service high-speed trains. Generally, the rail condition was monitored by a special railway inspection vehicle but the monitoring method needs an expensive measurement system. A monitoring method using accelerometers on an axle-box or a bogie was already proposed in the previous study, and the displacement was successfully estimated from the acceleration data by using Kalman and frequency selective band-pass filters. However, it was found that the displacement included not only the rail irregularities but also phase delay of the applied filters, and effect of suspension of the bogie and conicity of the wheel. To identify the rail irregularities from the estimated displacement, a compensation filter method is proposed. The compensation filters are derived by using recursive least squares method with the estimated displacement as input and the measured rail irregularity as output. The estimated rail irregularities are compared with the true rail irregularity data from the rail inspection system. From the comparison, the proposed method is a useful tool for the measurement of lateral and vertical rail irregularity.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.437-445
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed of the train but also to reduce the vibration. In this study, an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral, rolling and yawing motion of the car body and the bogie. The numerical analysis for the equation motions with 17 degrees of freedom showed the running stability and the critical speed due to the snake motion. Also the vibration modes of the high speed freight car was calculated using ADAMS RAIL software, which showed that the critical speed have the yawing modes of the car body and the bogie.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.13-25
• /
• 2016

High-speed railway (Korea Train Express) has had a deep impact on the regional economy of Korea. Current high-speed rail research is mostly theoretical, there is a lack of quantitative research using a precise algorithm to study the effect of high-speed railway on the regional economy. This paper analyses the influence of high-speed rail on the regional economy, with a focus on the Daegu area. Quantitative analysis using department store indexes and regional medical records is performed to calculate the economic influence of high-speed rail. The result shows that high-speed railway effects the regional economy though regional consumption growth and medical care trends.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.91-106
• /
• 2024

Around the world, many countries experiencing the issue of shrinking cities are continually expanding high-speed rail networks to enhance regional accessibility and address imbalances. This study analyzed the effects of high-speed train operations on the age-specific population migration in South Korean municipalities from 2012 to 2019, taking into account the risk levels of shrinking cities. For this purpose, an analysis was conducted using age-specific net in-migration population as the dependent variable, employing the spatial panel autoregressive model. The research results indicated that the influence of high-speed rail on regional population inflow varies depending on the risk level of shrinking city. In other words, high-speed railway operations had positive effects on population inflow in the capital areas and some major cities, while explained population outflow in the other regions. High-speed railways particularly exerted a significant impact on the inflow of the young and middle-aged population, representing the working age, but this effect was also limited to regions with a low risk of shrinkage. The findings of this study emphasize the importance of considering planned population and industrial attraction when installing high-speed rail with the goal of achieving regional balanced development and mitigating shrinkage. The results of this study also suggest the need for subsequent research to explore factors that positively influence population structure and inflow based on the level of shrinkage risk in each region, as well as the introduction of new policies tailored to the specific situations of each local government.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.579-585
• /
• 2018

This study is to figure out the fuel injection characteristics according to the injection pressure and engine speed in the fuel supply system for gas fuel. The fuel rail pressure was from 1.5 to 6.0 bar by 1.5 bar increment and engine speed was set 1,000 ~ 6,000 RPM at interval of 1000 RPM. Considering the real engine operation, the injection pulse width was set 2.5ms, 5.0ms, and 13.0ms which correspond low, mid and high load condition respectively. In conclusion, in case of 100cc fuel rail, 4.5 bar of injection pressure showed best performance and the minimum required injection quantity 53cc which guarantees engine output can be obtained in each 1000~ 6000 rpm engine speed.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.193-201
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of tile high speed freight car was calculated using ADAMS RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally, this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1131-1136
• /
• 2008

The single-phase PWM converter employing power semiconductors is currently applied to the power unit of high-speed rail vehicle and increasingly used as the front-end converter with properties of near unity power factor. Power factor and harmonics are increasingly important needs for drive system of high-speed rail vehicle. The proposed approach has many advantages which include fewer semiconductor components, simplified control, high performance features and satisfies IEC 555 harmonic current standards. Simulation results show that the dc-link voltage control obey the reference value during constant load and input current is near sinusoidal.