• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1221-1226
• /
• 2008

Present, the cooling method of using a phase-change heat transfer such as immersed type, heat pipe etc is applied in cooling of high-capacity power semiconductors of the main power system for the high speed train with the concentrated traction. In order to apply these phase-change cooling system to the high speed EMU to be developed, needed are technological researches of consideration of installing space, air passage, light weight material and miniaturization. Although this research establishes design specifications through theoretical analysis and computational analysis from the basic design process of the cooling system of the propulsion system for the high-speed EMU, when details design is completed, present improvement subject and optimum design before manufacturing the prototype of the cooling system on the basis of analysis results. And then, carried out will be the performance tests through prototype manufacture and reliability estimation by components of cooling system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1026-1032
• /
• 2010

In this paper, To estimate the train exterior noise and environment noise which are occur when High-Speed EMU is driving with the speed of 370km/h, Estimated sound source about noise that is appeared during operation based upon noise SPL values. Based on aero-dynamic noise source and wheel-rail noise source, these were already used to the existed research, we have estimated each sound power about measured noise, and computed the sound source to apply on the High-Speed EMU, and also calculated the sound power in case of the maximum operation speed of 370km/h.

• 융합보안논문지
• /
• 제13권6호
• /
• pp.61-68
• /
• 2013

본 논문은 동력분산식 차세대고속열차가 최고속도 400km/h 이상으로 개발됨에 따라 차량의 최고속도 시험에 대비하여 호남고속철도 건설구간에서 인프라시스템 기술개발이 필요하여 국내에서는 유일하게 현재 호남고속철도 건설구간 중 28km 구간에서 400km/h급 고속철도 인프라를 구축하였다. 또한 계측장비의 설치 및 모니터링 시스템을 설치하여 선로의 지속적인 모니터링이 가능하도록 설계하였다. 이를 통해, 보다 포괄적이며 장기적인 관점에서 통합모니터링의 요구사항과 향후 연구방향을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1157-1163
• /
• 2014

본 논문은 동력분산식 차세대고속열차가 최고속도 400km/h 이상으로 개발됨에 따라 차량의 최고속도 시험에 대비하여 호남고속철도 건설구간에서 인프라시스템 기술개발이 필요하여 국내에서는 유일하게 현재 호남고속철도 건설구간 중 28km 구간에서 400km/h급 고속철도 인프라를 구축하였다. 또한 계측장비의 설치 및 모니터링 시스템을 설치하여 선로의 지속적인 모니터링이 가능하도록 설계하였다. 이를 통해, 보다 포괄적이며 장기적인 관점에서 통합모니터링의 요구사항과 향후 연구방향을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1006-1010
• /
• 2010

This paper discusses the numerical study on the stability of the high-speed EMU by developing its lumped parameter model including the effect of the creepage. The 6, 10 and 14 degrees-of-freedom (DOF) lumper parameter dynamic models are developed and the critical hunting speeds calculated from each model via Matlab software are analyzed and compared. It is demonstrated that the critical hunting speeds decrease while the degrees-of-freedom increase. In addition, the parametric study is conducted to extract major design parameters to influence on the stability of the high-speed EMU.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.970-978
• /
• 2010

In this study, interior noise of the high speed EMU was estimated by statistical energy analysis (SEA) method. Based on the data measured at a distance of 25m from a running train, exterior noise of the running train was calculated. And then it was designed as noise sources in VA ONE, a commercial software of SEA. coupling and damping loss factor of high speed EMU studied in previous studies is used. The interior noise of the train was estimated for a open-land section. The analysis of interior noise of HST in the tunnel section will be estimated through same method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.465-470
• /
• 2009

This paper discusses the numerical study on the dynamics of the high-speed EMU by developing the 34 degrees-of-freedom (DOF) lumped parameter model including the effect of the creepage. In order to reflect the creepage, the Kalker's wheel-rail contact theory is introduced in the proposed model. The dynamic analysis using $Matlab^{(R)}$ software is conducted, and its results are compared with those from ADAMS/Rail to investigate the validity of the proposed 34-DOF lumped parameter model. It is demonstrated that the results from the numerical study are similar to those from ADAMS/Rail. In addition, the critical design parameters of high-speed EMU are examined, and the design guidelines for reducing vibration and enhancing ride quality are proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.277-282
• /
• 2009

This research present final Proto-type design of Korean High speed EMU identity establishment. To making Proto-type design; Frist step is extracting design factor which can makes final image of Proto-type. And last, Apply it to the Original-form which was presented by last research. This research is for take one's own identity of korean High speed EMU, and makes originality of design for korean rail-road culture.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1209-1212
• /
• 2008

동력분산형 고속전철은 분산된 EMI 발생원(source)을 가지도록 제작되기 때문에, 분산된 전자계 감수품(感受品, victim) 가까이에서 기존의 동력집중형 시스템보다 전자계 발생원을 더 많이 가지고 있다. 이 연구에서는, 전자계 발생원들과 전자계 감수품들을 확인하고, 고속전철 시스템의 안전 운행을 위하여 EMI/EMS/EMC를 취급하는 방법을 개발한다. 개발되는 내용은, 고속전철의 전자파 장해 방지 측정과 기준연구, 제어용 부품 등에 대한 EMI/EMS 기준 수립, 그리고 시제품에 대한 EMI/EMC 시험 및 평가이다. 또한 최신 무선 통신 장비에 의한 영향과 PLD(전원선 교란)에 의한 효과도 이 연구에서 조사될 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.30-33
• /
• 2004

This paper suggested that the technical specification of tilting train EMU for speed up on existing lines. High speed strategy of existing lines are the modification of railway system which are made on cant, lengths of transition curves, the catenary system and train system. Tilting technology is more useful a strategy for speed increases on existing lines with low investment needed. We performed a feasibility study which is considered out real track conditions and designed propulsion and braking system of tilting EMU system.