• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.856-859
• /
• 2002

A system for high-resolution analysis of defective elementary cell (R, G or B) on Flat Panel Display (FPD) is described. Based on multiple acquisitions of low-resolution shifted images of the display, our system doesn't require a high-resolution sensor neither tedious alignment of the display, and will remain up to date even facing an important increase of the display dimensions. Our process, highly automated and thus flexible and robust, is expected to perform a full analysis in less than 60s. It is mainly intended for production tests and display classification by manufacturers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1338-1340
• /
• 2009

High resolution three-dimensional integral imaging display is proposed. Each time-multiplexed image is projected with different incident angle on same array of elemental lenses. Those images are collected at different positions in focal plane of lens array, and thus the number of the point light sources increases and their spacing decreases. Therefore, proposed method can create high resolution 3D images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1247-1249
• /
• 2009

We have successfully developed the 22 inch WSXGA+ DLS(Data Line Sharing) Panel driving in 75 Hz. In the large size and high resolution panels, it is very difficult to design the DLS Panels without failure because of the very short charging time and the large signal delay. So, we first investigated the charging order to find the most adequate charging type to the large size and high resolution panels. And then, we optimized the design of DLS in terms of improving the charging properties using the technologies of the Delta-doping TFTs, Cu metal electrodes and optimization of panel design value and the circuit signal timing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.197-200
• /
• 2008

We propose a novel n-type a-Si:H TFT pixel circuit which is proper to AMOLED display for the large size and high resolution. Proposed pixel circuit will be suit to panel for the high resolution because of different threshold sampling method. Driving method of proposed pixel circuit is very simple like an AMLCD. Our simulation indicates that the proposed pixel circuit can compensate the Vth shift and IR rising of power line so that provide better quality image.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.27-31
• /
• 2007

In this paper, we present an efficient tiled stereo display system for tangible meeting. For tangible meeting, it is important to provide immersive display with high resolution image to cover up the field of view and provide to the local user the same environment as that of remote site. To achieve these, a high resolution image needs to be transmitted for reconstruction of remote world, and it should be displayed using a tiled display. However, it is hard to transmit high resolution image in real time due to the limit of network bandwidth, and so we receive multiple images and reconstruct a remote world with received images in advance. Then, we update only a specific area where remote user exists by receiving low resolution image in realtime. We synthesize the transmitted image to the existing environmental map of remote world and display it as a stereo image. For this, we developed a new system which supports GPU based real time warping and blending, automatic feature extraction using machine vision technique.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.572-578
• /
• 2009

This paper introduce a structure of haptic collaboration system over high resolution tiled-display, and proposes a object based efficient display method for high resolution display in integrated system. in addition, a modeling of visualization system is defined to evaluate performance of the proposed method. Both haptic system and tiled-display system have requirements of computational power. A haptic device is unstable if haptic rendering rate is less than 1kHz. A requirement of tiled-display systems is frame rate of display. It requires update of 30 frame fer sec. If we use these systems independently, we can satisfy each requirements. However, if we integrate two systems, performance of entire system significantly decreases because of lack of resources. In this paper, therefore, we propose a segmentation-based display method for ultra high resolution display in integrated system. The proposed method reduces redundancy of display data by reducing a display rate of static objects. Finally, a modeling of visualization system is defined to evaluate performance of the proposed method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1561-1564
• /
• 2006

SDI has been developing mobile 3D display for years. For mobile applications, we adapted parallax barrier method. We have developed auto stereoscopic swing 3D display in which people can 3D image in both portrait and landscape mode. Furthermore to increase 3D resolution, we have developed a high resolution 3D display using time division multiplexing parallax barrier method

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.783-786
• /
• 2004

We have developed a 470 x 235ppi poly-Si TFT LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-resolution 2D and 3D autostereoscopic display. 3D image quality is especially high in a lenticular-lens-equipped 3D mode because both horizontal resolution and vertical resolution are high, and because these resolutions are equal. 3D and 2D images can be displayed simultaneously in the same picture. In addition, 3D images can be displayed anywhere and 2D characters can be made to appear at different depths with perfect legibility. No switching of 2D/3D modes is necessary, and the design's thin and uncomplicated structure makes it especially suitable for mobile terminals.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.557-561
• /
• 2009

This paper presents a prototype of high resolution 3D display with a new principle. We have proposed a new 3D display which has the features of both Integral Imaging (II) and volumetric display. The proposed display consists of two lens arrays and a thin volumetric display. When the viewer watches a thin volumetric display through two lens array, he can perceive a thick 3D image. In other words the two lens arrays can play a role of a convex lens which has a large diameter as a amplification of a depth. The advantage of the proposed display is that it has higher resolution than II and it is smaller than volumetric display with a large convex lens. In this paper, we show a detail of a prototype 3D display. We took various errors into consideration when we simulated 3D display and we found suitable lenses parameter from the simulation result. Then we confirm that the prototype will be able to reconstruct 3D images.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.67-74
• /
• 2006

In this paper, a tiled display system is developed to get a high-resolution image in visualization of large-scale structural analysis data with low-resolution display devices and low-cost cluster computer system. Concerning the hardware system, some of the crucial points are investigated, and a new beam-projector positioner is designed and manufactured to resolve the keystone phenomena which result in distorted image. In the development of tiled display software, Qt and OpenGL are utilized for GUI and rendering, respectively. To obtain the entire tiled image, LAM-MPI is utilized to synchronize the several sub-images produced from each cluster computer node.