• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.68-71
• /
• 1986

Oil in water microemulsion which has many pharmaceutical applications was prepared and evaluated. As oil sources and emulsifier, two grades of oil and egg phosphatide were used, respectively. Vacuum high shear mixing and high pressure homogenizing were performed and in the homogenizing step, effect of the number of passes in the homogenizer on the stability of microemulsion was studied, using Coulter counter, photographic microscope and pH-meter. From above results, it was concluded that the stability of microemulsion made of refined soy-bean oil was better than that of food grade soybean oil and by five passes in the homogenizer at 6,000 psi, we could make stable microemulsion with average particle diameter below $1\;{\mu}m$, with no particle above $5\;{\mu}m$ and no significant change during 6 weeks stored.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.337-342
• /
• 2018

Using a high pressure homonizer, we report on the electrochemical performance of $Li_4Ti_5O_{12}(LTO)$ particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. $LiCoO_2-based$ active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.20-40
• /
• 1996

The oil in water type ME of 4 component system was composed with POE monoalkyl ether and POE sorbitan monoalkyl ester as surfactant, saturated hydrocarbon, side chain structure and aromatic structure as oil, and glycerine as cosurfactant using high pressure homogenizer. The objective of this study was to examine the role of surfactant and oil structure on droplet size and stability. The experimental results showed that the droplet size was smaller with bigger polarity of oil, less hydrocarbon, longer hydrophilic chain of surfactant and higher concentration of glycerine. SQ and LP systems showed very stable but AB and ISB system unstable microemulsion.

• Food Science and Biotechnology
• /
• 제16권6호
• /
• pp.999-1005
• /
• 2007

An oil-in-water (O/W) emulsion [20 wt% com oil, 0.5-6.0 wt% fish gelatin (FG), pH 3.0] was produced by high pressure homogenization, and the influence of pH, protein concentration, and homogenization condition on the formation of FG-stabilized emulsions was assessed by measuring particle size distribution, electrical charge, creaming stability, microstructure, and free FG concentration in the emulsions. Optical microscopy indicated that there were some large droplets ($d>10\;{\mu}m$) in all FG-emulsions, nevertheless, the amount of large droplets tended to decrease with increasing FG concentration. More than 90% of FG was present free in the continuous phase of the emulsions. To facilitate droplet disruption and prevent droplet coalescence within the homogenizer, homogenization time was adjusted in O/W emulsions stabilized by 2.0 or 4.0 wt% FG. However, the increase in the number of pass rather promoted droplet coalescence. This study has shown that the FG may have some limited use as a protein emulsifier in O/W emulsions.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.145-148
• /
• 2012

Spherical silica aerogel powders were fabricated via an emulsion polymerization method from a water glass. A water-in-oil emulsion, in which droplets of a silicic acid solution are emulsified with span 80 (surfactant) in n-hexane, was produced by a high power homogenizer. After gelation, the surface of the spherical silica hydrogels was modified using a TMCS (trimethylchlorosilane)/n-hexane solution followed by solvent exchange from water to n-hexane. Hydrophobic silica wet gel droplets were dried at 80 ℃ under ambient pressure. A perfect spherical silica aerogel powder between1 to 12 ㎛ in diameter was obtained and its size can be controlled by mixing speed. The tapping density, pore volume, and BET surface area of the silica aerogel powder were approximately 0.08 g·cm-3, 3.5 ㎤·g-1 and 742 ㎡·g-1, respectively.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.482-486
• /
• 2013

바이오알콜이 아닌 탄화수소계 바이오연료를 생산하기 위한 발효 공정에 대한 연구가 주목을 받고 있다. 본 연구에서는 야생 균주에 비해 긴 사슬 지방산을 과량 생산하는 재조합 E. coli MG1655를 배양한 후 세포 내 지질을 효과적으로 분리하기 위한 연구를 수행하였다. 고압 균질기를 이용하여 세포를 파쇄한 후 환경친화적인 용매들을 이용하여 지질을 추출하였다. 세포 파쇄는 고압 균질기의 압력이 5,000 psi 보다 큰 압력 하에서 효과적으로 이루어졌으며 20,000 psi 까지의 압력 범위에서는 1~3회 파쇄로 모두 90% 이상의 파쇄율을 얻었다. 추출 용매 시스템의 경우 hexane/isopropyl alcohol과 ethyl acetate/ethanol 시스템이 상대적으로 높은 지질 회수율을 나타내었고 상기 세포 파쇄 조건을 적용하여 초기 지질량의 약 60%를 추출하였다. 또한 추출된 지질은 $C_{12}$, $C_{14}$, $C_{16}$과 $C_{18}$과 같이 긴사슬 지방산으로 구성되었음을 확인하였다.

• 현장농수산연구지
• /
• 제23권2호
• /
• pp.33-41
• /
• 2021

The effect of homogenization treatment on the suspension stability of makgeolli was evaluated. The non-soluble solids of makgeolli that were not homogenized were precipitated at 1.0-68 mm after 10 minutes of standing and 2.0-70.5 mm after 30 minutes of standing. On the other hand, in the makgeolli homogenized with a blender for more than 20 seconds, no precipitated non-soluble solids were observed during the initial 10 minutes, and when it was left still for 30 minutes, it showed precipitation of 2.0 mm (control 58.0 mm). The makgeolli treated with a high-pressure homogenizer did not show any sedimentation until 30 minutes of standing. In the sensory evaluation, the high-pressure homogenized makgeolli had a score of 3.93, whereas non-treated had a score of 2.80, which was improved by 40% by homogenization.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.1-6
• /
• 1994

Many useful biomaterials like enzymes are contained in yeast cells. However, the release of these intracellular biomateriais from the cells is required to recover them with hot water, solvent or various cell breakage methods of mechanical or non mechanical ones. The cell lysis or breakage of yeast is usually made by solvent like ethyl acetate and mechanical disintrgration with high pressure homogenizer or agitating beads mill. The separation of cell debris (i.e. solid liquid separation) is done by centrifuge or membrane depending on the recovery conditions. The features of both separation methods are shown in Tables 1 and 2. As it is often difficult to obtain a clear supernatant by centrifuge from the suspension containing cell debris, the membrane separation is also often used to gel a clear supernatant. In this report we introduce the several applications of membrane separation to separate the cell debris of yeast disintegrated chemically or mechanically and to recover the intracellular biomaterials.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.667-675
• /
• 2016

Nanoemulsions are actively used in several applications for pharmaceutical, cosmetic and chemical industries. In this study, we propose the use of microfluidizer known as high pressure homogenizer to prepare lipid nanoemulsion as a potent cosmetic delivery carrier. The lipid nanoemulsions were prepared by O/W emulsion with hydrogenated lecithin and different type of oils. Effects of oil type on the stability of the lipid nanoemulsion were investigated with Dynamic Light Scattering (DLS) and Zeta-potential. Arbutin was used as model drug for transdermal administration through hairless mouse skin. Transdermal arbutin delivery using the lipid nanoemulsions was studied with HPLC method.

• KSBB Journal
• /
• 제26권5호
• /
• pp.381-385
• /
• 2011

Studies were made to improve the stability of astaxanthin which has application limitations caused by light and thermal stability problems in spite of its strong anti-oxidant property. Astaxanthin was extracted from Haematococcus pluvialis with supercritical carbon dioxide. Liposomal encapsulation of astaxanthin to improve the stability was made with high pressure homogenizer. The narrow size distribution was observed with astaxanthin liposomes. Tests on light and thermal stabilities resulted that the liposormal encapsulation improved the stability of astaxanthin for cosmeceutical purposes.