• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.6-13
• /
• 2014

In this paper, a multiwavelength-switchable first-order fiber flexible filter is newly proposed, which is based on a polarization-diversity loop. The proposed filter consists of a polarization beam splitter, three half-wave plates(HWPs), and two high birefringent fibers(HBFs). The proposed filter has a good flexibility in adjusting relative angular difference between the principal axes of two HBFs by inserting an HWP between two HBFs. The first-order flat-top or narrow band transmission spectra and the zeroth-order transmission spectra, which had a channel spacing of ~0.8nm, could be obtained by controlling the three HWPs, and, in particular, each of them could also be interleaved. In addition, zeroth-order transmission spectra with a channel spacing of ~0.8nm could be flexibly converted into those with a channel spacing of ~0.4nm through the control of three HWPs, and also be interleaved. The transmission characteristics of the proposed filter was theoretically analyzed and experimentally verified.

• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.440-448
• /
• 2009

설비용 전원선 EMI 필터(Facility power-line EMI filter)는 컴퓨터 센터와 같이 전자기적인 노이즈에 민감한 장비를 가진 배전 설비로 유입되는 EMI를 차단하기 위해 사용된다. 따라서 전류용량이 크며 특정한 응용분야에서는 MIL-STD 220 기준으로 14kHz~10GHz의 광대역에서 최고 100dB 이상의 삽입 손실(Insertion loss)이 요구된다. 이러한 요구조건을 만족하기 위해서는 광대역의 주파수에서 커패시터, 인덕터 등의 특성 분석과 고차 LC 필터 (High order LC filter) 설계기술이 필요하다. 본 논문에서는 이러한 광대역 설비용 전원선 EMI 필터의 설계에 대하여 기술하였다. 먼저, EMI 필터 설계를 위한 필터의 특징과 구조, 필터의 설계 과정, 필터 설계 방법 등에 대한 연구를 수행하였다. 그리고 필터 구성의 기본 소자인 커패시터와 인덕터의 특성에 대해 분석하였다. 최종적으로 광대역 설비용 전원선 EMI 필터를 설계 및 제작하여 실험을 수행하였으며, 실험 결과의 비교 분석을 통해 연구 결과를 검증하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.7-11
• /
• 2022

We are conducting research and development of magnetic filters for magnetic separation targeting paramagnetic materials. In order to develop a new magnetic filter with a large magnetic gradient, stainless fiber (SUS430, 120 mm × 3 mm) with a triangular cross section was sintered with a high void ratio (~ 70%) and the magnetic filter (20 mm × 2 mm) was created. When this magnetic filter was used to perform magnetic separation of hematite (particle size 50 ㎛) under a maximum magnetic flux density of 1.49 T, high separation rates were obtained.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.88-98
• /
• 2012

In this paper, the relationship between the bandwidth (BW) and power efficiency of a source follower based (SFB) filter is quantitatively analyzed, and a design methodology for a SFB filter for optimized BW - power consumption is introduced. The proposed design methodology achieves a maximum BW at a target quality (Q) factor for the given power consumption constraint by controlling design factors individually. In order to achieve the target BW from the maximized BW, a tuning method is introduced. Through the proposed design methodology, a fourth order Butterworth filter was implemented in 0.18 ${\mu}m$ CMOS technology. The measured BW, power consumption, and IIP3 are 100 MHz, 33 ${\mu}W$, and 9 dBm, respectively. Compared with other filter structures, the measured results show high BW - power efficiency.

• 전기학회논문지P
• /
• 제60권1호
• /
• pp.19-26
• /
• 2011

In this paper, we designed Interpolation FIR(Finite Impulse Response) filter and 1-bit SDM(Sigma- Delta Modulator) for small digital audio speaker, which has low power consumption and high output characteristics. In order to achieve high linearity and low distortion performance of the systems, we adopt Type I Chevychev FIR filter which has equiripple characteristics in the pass band and proposed high efficient FIR filter structure. SDM is the most efficient modulation technique among the noise shaping techniques. In this paper, we implemented SDM using CIFB(Cascade of Intergrators, Feed-Back) which is generally used in DAC of small digital audio speakers. The proposed SDM structure can achieve high SNR, high-efficiency characteristics and low power consumption in mobile devices. Also considering manufacture of SoC(System on Chip), we performed simulation with Matlab and Verilog HDL to obtain optimal number of operational bits and verified a good experimental results.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.47-52
• /
• 2006

불규칙 혼합잡음의 등가 ARMA 모델 표현을 사용하여 자이로의 불규칙 혼합잡음을 고려하는 보조항법시스템 칼만필터 설계 방법을 제안한다. 필터 설계 절차는 먼저 보조항법 시스템에 사용되는 필터는 간접 되먹임 칼만필터임을 고려하여 등가 ARMA 모델로 표현된 자이로 불규칙 잡음의 시간 차분을 구한다. 다음으로 시간 차분된 ARMA 모델을 상태 방정식으로 표현하는데 AR과 MA 차수에 따라 두 가지로 나누어진다. 먼저 AR 차수가 큰 경우 가제어 혹은 가관측 특이형태를 사용한다. MA 차수가 큰 경우에는 몇 단계 이후의 예측치를 상태변수로 하는 상태방정식을 사용하는데, 이때 자이로 출력을 보상하는 값에 따라 다시 고차수 필터와 저차수 필터로 구분된다. 마지막으로 자이로 불규칙 잡음을 보조항법시스템 칼만필터에 포함시켜 최종적인 필터 모델을 얻는다. 시뮬레이션 결과를 통하여 제안된 고차수 및 저차수 필터 모두 혼합잡음을 백색잡음으로 간주한 기존의 필터보다 항법오차를 감소시킬 수 있음을 보임으로써 그 효용성을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.553-555
• /
• 1996

This paper concerns with a method to improve the current and power waveforms of the variable speed $3{\Phi}$ AC motor system driven by the single-pulse PWM, and the current waveforms and $3{\Phi}$ power waveforms are analyzed by FFT under various running conditions. By the performance analysis through the experiments, the following results have been obtained. AC source of pseudo sine waveform can be obtained from the modulated alternating square voltage by means of the well designed LC filter. It is confirmed that current waveforms and $3{\Phi}$ power waveforms can be improved by utilizing the high order low pass LC filter than that of lower order. Especially, current waveforms and $3{\Phi}$ power waveforms tan be much improved at low frequency domain. $3{\Phi}$ power waveforms have a smatter ripple and bigger power by utilizing the high order low pass LC filter than that of lower order. Also, the running condition of $3{\Phi}$ AC motor is good at low frequency domain.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.247-249
• /
• 2008

There are many types of grid-connected inverter controllers; Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. However, SRF-based controller has a complex algorithm to apply in real application such as digital processor. Resonant controller is also reduced zero-steady state error, but its transfer function has a high order. In this paper, a simple proportional control is applied for grid connected inverter with LCL filter. LCL filter is a third order system. Applying a simple proportional controller is not increased the order of closed loop transfer function. By this technique, the single phase model is easily obtained. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• 한국전자파학회논문지
• /
• 제17권2호
• /
• pp.95-100
• /
• 2006

본 논문에서는 고차 대역 통과 여파기의 평탄도를 개선하기 위해 증폭기, 오목한 상보형 여파기, 감쇠기로 구성된 진폭 등화기를 설계하였다. 상보형 여파기는 2n차 체비셰프 원형의 극점 위치를 조절하여 체비셰프 다항식을 수정하고 회로망 합성법을 통하여 원형 소자 값을 계산하였다. 대역 통과 여파기에서 발생하는 손실을 보상하고 반사 특성을 개선할 수 있는 증폭기와 진폭 등화기의 이득 크기를 조절하기 위한 감쇠기를 계산된 원형 소자 값을 사용하여 설계한 4차 상보형 여파기에 연결하여 진폭 등화기를 구현하였다. 제안한 진폭 등화기를 사용하여 2.3 GHz 휴대 인터넷 대역(WiBro)의 13차 대역 통과 여파기의 평탄도 특성을 6 dB 개선하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.107-118
• /
• 1995

The characteristics of the current waveforms and 3$\Phi$ power waveforms of the variable speed 3$\Phi$ AC motor system driven by the single-pulse PWM investigated in this paper. The system is composed of a digital bridge inverter and low pass LC filter. It is confirmed that current waveforms and 3$\Phi$ power waveforms can be improved by utilizing the high order low pass LC filter than that of lower order through computer simulation. Also, we propose the low pass LC filter revised from the conventional LC filter.