• 제목/요약/키워드: High-index GaAs

검색결과 53건 처리시간 0.023초

MQW Buried RWG LD 최적화 설계 (The optimum design of MQW Buried-RWG LD)

  • 황상구;오수환;김정호;김운섭;김동욱;하홍춘;홍창희
    • 한국광학회지
    • /
    • 제12권4호
    • /
    • pp.312-319
    • /
    • 2001
  • 본 연구에서는 기존의 RWG LD(Ridge waveguide laser diode)보다 Ridge 폭의 제어가 쉽고 Planar화에 유리하며 측방향의 굴절률차를 성장층의 두께로 조절이 가능한 Buried RWG LD를 제안하였다. 이론해석의 결과로부터 효율적으로 동작하는 MQW B-RWG(Multi-quantum well buried ridge waveguide)LD를 제작하기 위해서는 제작하고자 하는 Ridge 폭에 따라 측장향 유효굴절률차 $\Delta_{nL}$ 의 임계값보다 약간 크게 되도록 유효굴절률 조절을 위한 $d_2(\lambda_g=1.25{\mu}m, InGaAsP layer) 층과 P-InP cald 층인 $d_3$층의 두께를 제어해야 하며 임계전류값이 최소로 되면서 측방향에서 단일모드로 동작하도록 Ridge 폭을 설계해야 한다. 그리고 측방향 유효굴절률차를 적절히 조절한다면 $6~9{\mu}m$의 Ridgechr을 가지면서 단일모드로 동작하는 LD제작이 가능함을 알 수 있었다.

  • PDF

유전자 알고리즘 기반 최적 다항식 뉴럴네트워크 연구 및 비선형 공정으로의 응용 (A Study on GA-based Optimized Polynomial Neural Networks and Its Application to Nonlinear Process)

  • 김완수;이인태;오성권;김현기
    • 한국지능시스템학회논문지
    • /
    • 제15권7호
    • /
    • pp.846-851
    • /
    • 2005
  • 본 논문은 최적 탐색 알고리즘인 유전자 알고리즘을 이용하여 다항식 뉴럴네트워크(Polynomial Neural Networks : PNN)의 최적 설계가 그 목적이다. 기존의 다항식 뉴럴네트워크는 확장된 GMDH(Group Method of Data Handling) 방법에 기반을 두며, 네트워크의 성장과정을 통하여 각 층의 다항식뉴런(혹은 노드)에서 고정된 (설계자에 의해 미리 선택된) 노드 입력들의 수뿐만 아니라 다항식 차수(1차, 2차, 그리고 수정된 2차식)를 이용하였다. 더구나, 그 방법은 학습을 통해 생성된 PNN이 최적 네트워크 구조를 가진다는 것을 보증하지 못한다. 그러나, 제안된 GA-based PNN 모델은 다음의 파라미터들- 즉 입력변수의 수, 입력변수, 및 다항식 차수-을 유전자 알고리즘을 이용하여 선택 동조함으로써 그 구조를 구조적으로 더 최적화된 네트워크가 되도록 하고, 기존의 PNN보다 훨씬 더 유연하고, 선호된 뉴럴 네트워크가 되도록 한다. 하중계수를 가진 합성성능지수가 그 모델의 근사화 및 일반화(예측) 능력 사이의 상호 균형을 얻기 위해 제안된다. GA-based PNN의 성능을 평가하기 위해 그 모델은 가스 터빈 발전소의 NOx 배출 공정 데이터로 실험된다. 비교해석은 제안된 GA-based PNN이 앞서 나타난 다른 지능모델보다 더 우수한 예측능력뿐만 아니라 높은 정확성을 가진 모델임을 보인다.

한반도 남서부 남원 일대에 분포하는 A형 대강 화강암의 암석학, 지화학 및 지구조적 의미 (Petrology, Geochemistry and Tectonic Implication of the A-type Daegang granite in the Namwon area, Southwestern part of the Korean Peninsula)

  • 김용준;조등룡;이창신
    • 자원환경지질
    • /
    • 제31권5호
    • /
    • pp.399-413
    • /
    • 1998
  • Daegang granite is located around the Namwon-gun, Cheolabuk-do, and is an elongate stock $(80 km^{2})$ in the NNE-SSW direction. Daegang granite has the very same mineralogical and geochemical characteristics as those of the typical A-type granites; (1) it is a one feldspar hypersolvus granite, and is classified as an alkali feldspar granite in the lUGS scheme, (2) has small amounts of Fe-rich biotite (annite) and alkali amphibole (ribeckite) that are late in the crystallization sequence of the granitic magma, (3) always contains opaque oxides, fluorite and zircon, (4) shows high and quite homogeneous $SiO_2$, content (mostly 72~77 wt.%) and $(Na_{2}O+K_{2}O)/Al_{2}O_{3}$ ratio (0.90~0.98), (5) contains high Ga, lOOOO*Ga/Ai, $K_{2}O+Na_{2}O$, $(K_{2}O+Na_{2}O)/CaO$, $K_{2}O/MgO$, FeO/MgO, agpaitic index, Zr, Nb, Ce, Y, Zn value or ratio that resemble to those of the Australian A-type granites (Whalen et al., 1987), and (6) has enriched LREE and HREE that show flat variation pattern with slightly depleted in HREE and profound Eu anomalies (Eu/Eu*=0.04~0.l4). In the tectonic discrimination diagrams of Pearce et al. (1984) and Eby (1992), Daegang granite is classified as a within plate granite and $A_{2}-type$.

  • PDF

Use of Quantitative Vertebral Bone Marrow Fat Fraction to Assess Disease Activity and Chronicity in Patients with Ankylosing Spondylitis

  • Ga Young Ahn;Bon San Koo;Kyung Bin Joo;Tae-Hwan Kim;Seunghun Lee
    • Korean Journal of Radiology
    • /
    • 제22권10호
    • /
    • pp.1671-1679
    • /
    • 2021
  • Objective: We quantitatively measured the fat fraction (FF) in the vertebrae of patients with ankylosing spondylitis (AS) using magnetic resonance imaging (MRI) and investigated the role of FF as an indicator of both active inflammation and chronicity. Materials and Methods: A total of 52 patients with AS who underwent spinal MRI were retrospectively evaluated. The FF values of the anterosuperior and anteroinferior corners of the bone marrow in the L1-S1 spine were assessed using the modified Dixon technique. AS activity was measured using the Bath Ankylosing Spondylitis Disease Activity Index (BASDAI), Bath Ankylosing Spondylitis Functional Index (BASFI), AS Disease Activity Score (ASDAS), and serum inflammatory marker levels. AS disease chronicity was assessed by AS disease duration and the modified Stoke Ankylosing Spondylitis Spinal Score (mSASSS). Univariable and multivariable regression analyses were conducted to investigate the correlation between FF and other clinical characteristics. Results: The mean FF ± standard deviation of the total lumbar spine was 43.0% ± 11.3%. At univariable analysis, spinal FF showed significant negative correlation with BASDAI (β = -0.474, p = 0.002) and ASDAS with C-reactive protein (ASDAS-CRP; β = -0.478, p = 0.002) and a significant positive correlation with AS disease duration (β = 0.440, p = 0.001). After adjusting for patient age, sex, and total mSASSS score, spinal FF remained significantly negatively correlated with BASDAI (β = -0.543, p < 0.001), ASDAS-CRP (β = -0.568, p < 0.001), and ASDAS with erythrocyte sedimentation rate (β = -0.533, p = 0.001). Spinal FF was significantly lower in patients with very high disease activity (ASDAS-CRP > 3.5) than in those with only high disease activity (2.1 ≤ ASDAS-CRP ≤ 3.5) (p = 0.010). Conclusion: Spinal FF may help assess both AS disease activity and chronicity.

백색 LED용 청록색 BaSi2O2N2:Eu2+ 형광체의 합성 및 응용 (Synthesis and Application of Bluish-Green BaSi2O2N2:Eu2+ Phosphor for White LEDs)

  • 지순덕;최강식;최경재;김창해
    • 한국재료학회지
    • /
    • 제21권5호
    • /
    • pp.250-254
    • /
    • 2011
  • We have synthesized bluish-green, highly-efficient $BaSi_2O_2N_2:Eu^{2+}$ and $(Ba,Sr)Si_2O_2N_2:Eu^{2+}$ phosphors through a conventional solid state reaction method using metal carbonate, $Si_3N_4$, and $Eu_2O_3$ as raw materials. The X-ray diffraction (XRD) pattern of these phosphors revealed that a $BaSi_2O_2N_2$ single phase was obtained. The excitation and emission spectra showed typical broadband excitation and emission resulting from the 5d to 4f transition of $Eu^{2+}$. These phosphors absorb blue light at around 450 nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of an experiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu = 0.033. A small substitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDs through a combination of $BaSi_2O_2N_2:Eu^{2+}$, YAG:$Ce^{3+}$, and silicone resin with a blue InGaN-based LED. In the case of only the YAG:$Ce^{3+}$-converted LED, the color rendering index was 73.4 and the efficiency was 127 lm/W. In contrast, in the YAG:$Ce^{3+}$ and $BaSi_2O_2N_2:Eu^{2+}$-converted LED, two distinct emission bands from InGaN (450 nm) and the two phosphors (475-750 nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color rendering index and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering index indicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED. As such, the $BaSi_2O_2N_2:Eu^{2+}$ phosphor is applicable to white high-rendered LEDs for solid state lighting.

Vapor Phase Epitaxy of Magnesium Oxide on Si(001) Using a Single Precursor

  • Lee, Sun-Sook;Lee, Sung-Yong;Kim, Chang G.;Lee, Sang-Heon;Nah, Eun-Ju;Kim, Yunsoo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.122-122
    • /
    • 2000
  • Magnesium oxide is thermodynamically very stable, has a low dielectric constant and a low refractive index, and has been widely used as substrate for growing various thin film materials, particulary oxides of the perovskite structure. There has been a considerable interest in integrating the physical properties of these oxides with semiconductor materials such as GaAs and Si. In this regard, it is considered very important to be able to grow MgO buffer layers epitaxially on the semiconductors. Various oxide films can then be grown on such buffer layers eliminating the need for using MgO single crystal substrates. Vapor phase epitaxy of magnesium oxide has been accomplished on Si(001) substrates in a high vacuum chamber using the single precursor methylmagnesium tert-butoxide in the temperature range 750-80$0^{\circ}C$. For the epitaxy of the MgO films, SiC buffer layers had to be grown on Si(001). The films were characterized by reflection high energy electron diffraction (RHEED) in situ in the growth chamber, and x-ray diffraction (XRD), x-ray pole figure analysis, scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS) after the growth.

  • PDF

역추적식 반사체를 가진 태양광 발전 시스템의TRIZ(6SC) 응용 설계 (A Study on TRIZ Applied Design for Photovoltaic System with Reversal Tracking Reflector)

  • 허용정;홍성도
    • 반도체디스플레이기술학회지
    • /
    • 제11권3호
    • /
    • pp.27-31
    • /
    • 2012
  • This paper presents a study on the design of photovoltaic system with reversal tracking reflector. The reversal tracking reflector is conceptually designed by using TRIZ. The 20 to 30% of incident rays cannot produce the current and reflected back to the glass surface because of high refractive index of solar cell which are produced from Si, GaAs. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The reflector which has the actuator can be trackback the sun. Reversal tracking reflector which mounted on the top of the system prevents the shadowing loss and improve the efficiency of track back function. The anti-glare reflector prevents the heat due to the concentrated reflected light rays.

초소형의 광섬유 결합형 테라헤르츠 모듈을 이용한 시간영역에서의 분광 및 이미징 (Terahertz Time-Domain Spectroscopy and Imaging using Compact Fiber-coupled Terahertz Modules)

  • 윤영종;김남제;류한철;문기원;신준환;한상필;박경현
    • 한국광학회지
    • /
    • 제25권2호
    • /
    • pp.72-77
    • /
    • 2014
  • 본 논문에서는 초소형의 광섬유 결합형 테라헤르츠 모듈을 이용하여 테라헤르츠 시간영역 분광 및 영상 시스템을 구성하였다. 구성된 THz 분광 시스템을 이용하여 3 THz 이상의 자유공간에 분포되어 있는 수분의 고유 흡수 스펙트럼을 관측하였고 테라헤르츠 대역에서의 Si, $Al_2O_3$, GaAs기판에 대한 굴절률을 측정하였으며 측정을 위해 다중 반사를 고려한 전달 함수를 이용한 굴절률 측정 방법을 이용하였다. 또한, 테라헤르츠 영상 시스템을 이용하여 의료용 칼과 클립을 측정하여 250 ${\mu}m$ 간격으로 $192{\times}89$ 픽셀의 영상을 얻었다.

반도체 레이저 단면의 실시간 무반사 및 고반사 코팅 (Real-time controlled deposition of anti-reflection and high-reflection coatings for semiconductor laser)

  • 김효상;박흥진;황보창권;김부균;김형문;주흥로
    • 한국광학회지
    • /
    • 제8권5호
    • /
    • pp.395-402
    • /
    • 1997
  • $\1.55mu\textrm{m}$ InGaAsP MQW FP 반도체 레이저 단면의 무반사 코팅 두께를 앞면에 무반사 코팅하는 동안 뒷면의 출력을 실시간으로 측정하여 결정하였다. 굴절률 1.85인 $SiO_x$ 박막의 최적 두께는 188 nm이고, 무반사 코팅 전, 후의 문턱전류비로 계산한 단면의 반사율은 약 2 $\times$ $10^{-4}$이었다. 무반사 코팅 후 주입전류 60 mA일 때 출력이 87%, 기울기 효율이 3.4배, 문턱전류가 2.64배 증가하였다. 또한 실시간으로 $Si/SiO_2$ 박막의 고반사 코팅을 뒷면에 한 후 코팅 전보다 출력이 약 160% 향상되었고, 기울기 효율이 3.8배 증가하였으며, 문턱전류는 1.07배로 코팅 전과 거의 비슷하여, 무반사 및 고반사 코팅 후 반도체 레이저의 출력특성이 크게 향상되었다.

  • PDF

Er 첨가 황화물계 광섬유의 제조 및 분광학적 특성 (Spectroscopic Properties of Er-doped Sulfide Fiber)

  • 최용규;임동성;김경헌;박세호;허종
    • 한국세라믹학회지
    • /
    • 제37권8호
    • /
    • pp.781-786
    • /
    • 2000
  • An Er-doped sulfide fiber was drawn, and its spectroscopic properties were analyzed. Compositions of a 1000 ppmwt Er3+-doped core and an undoped clad were Ge30-Ga1-Asg-S61 and Ge30-As8-S62, in at.%, respectively. Refractive index of the core composition was approximately 0.01 high than that of the clad. In order to enhance the mechanical stability as well as to prevent infiltration of impurity ions such as OH-, an UV-curable polymer was used for the coating. The optical loss of a fiber formed directly from a polymer coated core rod without cladding was ∼15 dB/m at 1.06$\mu\textrm{m}$. In the case of a fiber with core/clad structure, the optical loss was so high that the stimulated emission of erbium fluorescence was not evident. It is believed that presence of inhomogeneous core/clad interface and crystalline aggregates precipitated in the clad region were responsible for the high optical loss. On the other hand, fluorescence characteristics of Er3+ embedded in the core region were more or loss deteriorate compared to fiber preform, which is attributed to the redistribution of the Er ions along with the partial crystallization of the core glass during the fiberization process.

  • PDF